+++ /dev/null
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "VGV7510KW22 - o2 Box 6431";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200 init=/etc/preinit mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
-
- led-dsl = &dsl;
- led-internet = &internet_green;
- led-wifi = &wifi;
- };
-
- sram@1F000000 {
- vmmc@107000 {
- status = "okay";
- gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay
- &gpio 31 GPIO_ACTIVE_HIGH //still unknown
- &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic?
- };
- };
-
- memory@0 {
- reg = <0x0 0x4000000>;
- };
-
- fpi@10000000 {
- localbus@0 {
- nor-boot@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x1000000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- boardconfig: partition@fe0000 {
- label = "board_config";
- reg = <0xfe0000 0x20000>;
- read-only;
- };
- };
- };
- };
-
- gpio: pinmux@E100B10 {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- gphy-leds {
- lantiq,groups = "gphy0 led0", "gphy0 led1",
- "gphy1 led0", "gphy1 led1";
- lantiq,function = "gphy";
- lantiq,open-drain = <0>;
- lantiq,pull = <2>;
- lantiq,output = <1>;
- };
- mdio {
- lantiq,groups = "mdio";
- lantiq,function = "mdio";
- };
- pci-rst {
- lantiq,pins = "io21";
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- };
- };
-
- ifxhcd@E101000 {
- status = "okay";
- gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
- };
-
- pcie@d900000 {
- status = "disabled";
- };
- };
-
- gphy-xrx200 {
- compatible = "lantiq,phy-xrx200";
- firmware1 = "lantiq/vr9_phy22f_a1x.bin"; /*VR9 1.1*/
- firmware2 = "lantiq/vr9_phy22f_a2x.bin"; /*VR9 1.2*/
- phys = [ 00 01 ];
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
-
- reset {
- label = "reset";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- dsl: dsl {
- label = "vgv7510kw22:green:dsl";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- };
-
- internet_red {
- label = "vgv7510kw22:red:internet";
- gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
- };
-
- info_red {
- label = "vgv7510kw22:red:info";
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- };
-
- power_green: power {
- label = "vgv7510kw22:green:power";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
-
- info_green {
- label = "vgv7510kw22:green:info";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- };
-
- internet_green: internet_green {
- label = "vgv7510kw22:green:internet";
- gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
- };
-
- wifi: wifi {
- label = "vgv7510kw22:green:wlan";
- gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
- };
-
- power_red: power2 {
- label = "vgv7510kw22:red:power";
- gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
- };
-
- phone {
- label = "vgv7510kw22:green:telefon";
- gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pci0 {
- status = "okay";
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
- wifi@1814,3592 {
- compatible = "pci1814,3592";
- reg = <0x7000 0 0 0 0>;
- ralink,mtd-eeprom = <&boardconfig 0x410>;
- ralink,mtd-eeprom-swap;
- mtd-mac-address = <&boardconfig 0x16>;
- mtd-mac-address-increment = <1>;
- };
-};
-
-ð0 {
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mtd-mac-address = <&boardconfig 0x16>;
- lantiq,switch;
-
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "mii";
- phy-handle = <&phy11>;
- };
- ethernet@3 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <3>;
- phy-mode = "mii";
- phy-handle = <&phy12>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "mii";
- phy-handle = <&phy13>;
- };
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "mii";
- phy-handle = <&phy14>;
- };
- };
-
- wan: interface@1 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- mtd-mac-address = <&boardconfig 0x16>;
- mtd-mac-address-increment = <3>;
- lantiq,wan;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "mii";
- phy-handle = <&phy1>;
- };
- };
-
- mdio@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy1: ethernet-phy@1 {
- reg = <0x1>;
- compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22";
- };
-
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy12: ethernet-phy@12 {
- reg = <0x12>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy14: ethernet-phy@14 {
- reg = <0x14>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
projects / openwrt / openwrt.git / blobdiff