lantiq: Sanitize device tree files
[openwrt/openwrt.git] / target / linux / lantiq / dts / BTHOMEHUBV5A.dts
index 414d4bb8c47bcb3a4a15f26bb6f420bc1d7f2cec..97d08295484ca0ad3b5db31b613955c2882ac0ef 100644 (file)
@@ -1,58 +1,68 @@
 /dts-v1/;
 
-/include/ "vr9.dtsi"
+#include "vr9.dtsi"
 
 / {
        model = "BTHOMEHUBV5A - BT Home Hub 5A";
 
        chosen {
                bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+       };
 
-               leds {
-                       boot = &power_green;
-                       failsafe = &power_red;
-                       running = &power_blue;
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_red;
+               led-running = &power_blue;
 
-                       internet = &broadband_blue;
-                       wifi = &wireless_blue;
-               };
+               led-internet = &broadband_blue;
+               led-wifi = &wireless_blue;
        };
 
        memory@0 {
                reg = <0x0 0x8000000>;
        };
 
+       cputemp@0 {
+               compatible = "lantiq,cputemp";
+       };
+
        fpi@10000000 {
                localbus@0 {
                        nand-parts@0 {
                                compatible = "gen_nand", "lantiq,nand-xway";
                                lantiq,cs = <1>;
                                bank-width = <2>;
-                               reg = <0 0x0 0x2000000>;
+                               reg = <0x1 0x0 0x2000000>;
                                #address-cells = <1>;
                                #size-cells = <1>;
 
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x40000>;
-                                       read-only;
-                               };
-                               partition@40000 {
-                                       label = "uboot-env";
-                                       reg = <0x40000 0x40000>;
-                               };
-                               caldata: partition@80000 {
-                                       label = "caldata";
-                                       reg = <0x80000 0x20000>;
-                                       read-only;
-                               };
-                               partition@a0000 {
-                                       label = "kernel";
-                                       reg = <0xa0000 0x200000>;
-                               };
-                               partition@2a0000 {
-                                       label = "ubi";
-                                       reg = <0x2a0000 0x7d60000>;
+                               partitions {
+                                       compatible = "fixed-partitions";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       partition@0 {
+                                               label = "u-boot";
+                                               reg = <0x0 0x40000>;
+                                               read-only;
+                                       };
+                                       partition@40000 {
+                                               label = "uboot-env";
+                                               reg = <0x40000 0x40000>;
+                                       };
+                                       caldata: partition@80000 {
+                                               label = "caldata";
+                                               reg = <0x80000 0x20000>;
+                                               read-only;
+                                       };
+                                       partition@a0000 {
+                                               label = "kernel";
+                                               reg = <0xa0000 0x200000>;
+                                       };
+                                       partition@2a0000 {
+                                               label = "ubi";
+                                               reg = <0x2a0000 0x7d60000>;
+                                       };
                                };
                        };
                };
 
                ifxhcd@E101000 {
                        status = "okay";
-                       gpios = <&gpio 33 0>;
+                       gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
                };
 
                pci@E105400 {
                        lantiq,bus-clock = <33333333>;
                        interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
                        interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
-                       gpio-reset = <&gpio 21 0>;
+                       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
                };
        };
 
 
                reset {
                        label = "reset";
-                       gpios = <&gpio 2 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
 
                wps {
                        label = "wps";
-                       gpios = <&gpio 25 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
 
                restart {
                        label = "restart";
-                       gpios = <&gpio 39 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_POWER>;
                };
        };
 
                /* broadband-* is a single RGB led */
                broadband-red {
                        label = "bthomehubv5a:red:broadband";
-                       gpios = <&gpio 0 1>;
+                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
                };
                broadband-green {
                        label = "bthomehubv5a:green:broadband";
-                       gpios = <&gpio 3 1>;
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
                };
                broadband_blue: broadband-blue {
                        label = "bthomehubv5a:blue:broadband";
-                       gpios = <&gpio 8 1>;
+                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
                };
 
                /* wireless-* is a single RGB led */
                wireless-red {
                        label = "bthomehubv5a:red:wireless";
-                       gpios = <&gpio 9 1>;
+                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
                };
                wireless-green {
                        label = "bthomehubv5a:green:wireless";
-                       gpios = <&gpio 10 1>;
+                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
                };
                wireless_blue: wireless-blue {
                        label = "bthomehubv5a:blue:wireless";
-                       gpios = <&gpio 11 1>;
+                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
                };
 
                /* power-* is a single RGB led */
                power_red: power-red {
                        label = "bthomehubv5a:red:power";
-                       gpios = <&gpio 12 1>;
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
                };
                power_green: power-green {
                        label = "bthomehubv5a:green:power";
-                       gpios = <&gpio 14 1>;
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
                        default-state = "keep";
                };
                power_blue: power-blue {
                        label = "bthomehubv5a:blue:power";
-                       gpios = <&gpio 15 1>;
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
                };
 
                dimmed {
                        label = "dimmed";
-                       gpios = <&gpio 19 0>;
+                       gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
                };
        };
 };