/dts-v1/;
-/include/ "danube.dtsi"
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
/ {
model = "ARV752DPW - Arcor 802";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+ };
- leds {
- boot = &power_red;
- failsafe = &power_blue;
- running = &power_red;
+ aliases {
+ led-boot = &power_red;
+ led-failsafe = &power_blue;
+ led-running = &power_red;
- internet = &internet_red;
- wifi = &wifi;
- };
+ led-internet = &internet_red;
+ led-usb = &umts;
+ led-wifi = &wifi;
};
memory@0 {
sram@1F000000 {
vmmc@107000 {
status = "okay";
- gpios = <&gpiomm 1 0>;
+ gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
};
};
#address-cells = <1>;
#size-cells = <1>;
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x10000>;
- read-only;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x10000 0x10000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x20000 0x7d0000>;
+ };
+
+ boardconfig: partition@7f0000 {
+ label = "board_config";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
};
-
- partition@10000 {
- label = "uboot_env";
- reg = <0x10000 0x10000>;
- read-only;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x20000 0x7d0000>;
- };
-
- partition@7f0000 {
- label = "board_config";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
-
- mac_addr {
- compatible = "lantiq,eth-mac";
- reg = <0 0x7f0016 0x6>;
- mac-increment = <2>;
};
gpiomm: gpiomm@4000000 {
ifxhcd@E101000 {
status = "okay";
- gpios = <&gpiomm 0 0>;
+ gpios = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
};
etop@E180000 {
phy-mode = "rmii";
+ mtd-mac-address = <&boardconfig 0x16>;
};
-
- pci@E105400 {
- status = "okay";
- lantiq,external-clock;
- gpio-reset = <&gpio 21 0>;
- interrupt-map = <0x7000 0 0 1 &icu0 135>;
- req-mask = <0x3>;
- };
-
- };
-
- ralink_eep {
- compatible = "ralink,eeprom";
- ralink,eeprom = "RT2860.eeprom";
};
gpio-keys-polled {
#size-cells = <0>;
poll-interval = <100>;
- /* wps {
+ wps {
label = "wps";
- gpios = <&gpio 11 1>;
- linux,code = <0x211>;
- }; */
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
restart {
label = "restart";
- gpios = <&gpio 12 1>;
- linux,code = <0x110>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
};
dsl {
label = "dsl";
- gpios = <&gpio 13 1>;
- linux,code = <0x111>;
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
};
reset {
label = "reset";
- gpios = <&gpio 28 1>;
- linux,code = <0x198>;
+ gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
};
compatible = "gpio-leds";
power_blue: power1 {
label = "arv752dpw:blue:power";
- gpios = <&gpio 3 1>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
internet_red: internet {
label = "arv752dpw:red:internet";
- gpios = <&gpio 4 1>;
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
message {
label = "arv752dpw:red:message";
- gpios = <&gpio 5 1>;
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
power_red: power {
label = "arv752dpw:red:power";
- gpios = <&gpio 6 1>;
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
voice1 {
label = "arv752dpw:red:voice";
- gpios = <&gpio 8 1>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
- microphone {
+ umts: umts {
label = "arv752dpw:red:umts";
- gpios = <&gpiomm 3 1>;
+ gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "arv752dpw:red:wifi";
- gpios = <&gpiomm 4 1>;
+ gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
};
fxs1 {
label = "arv752dpw:green:tae-n";
- gpios = <&gpiomm 5 1>;
+ gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
};
fxs2 {
label = "arv752dpw:green:tae-u";
- gpios = <&gpiomm 6 1>;
+ gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
};
fxo {
label = "arv752dpw:green:isdn";
- gpios = <&gpiomm 7 1>;
+ gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
};
internet2 {
label = "arv752dpw:blue:internet";
- gpios = <&gpiomm 8 1>;
+ gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
};
voice2 {
label = "arv752dpw:blue:voice";
- gpios = <&gpiomm 9 1>;
+ gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
};
};
};
+
+&pci0 {
+ status = "okay";
+ lantiq,external-clock;
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ interrupt-map = <0x7000 0 0 1 &icu0 135>;
+ req-mask = <0x3>;
+
+ wifi@1814,0601 {
+ compatible = "pci1814,0601";
+ reg = <0x7000 0 0 0 0>;
+ ralink,mtd-eeprom = <&boardconfig 0x410>;
+ ralink,mtd-eeprom-swap;
+ };
+};