kernel: qca-nss-dp: add back printing attached PHY-s
[openwrt/openwrt.git] / target / linux / lantiq / dts / ARV4518PWR01.dtsi
diff --git a/target/linux/lantiq/dts/ARV4518PWR01.dtsi b/target/linux/lantiq/dts/ARV4518PWR01.dtsi
deleted file mode 100644 (file)
index 49b7e50..0000000
+++ /dev/null
@@ -1,196 +0,0 @@
-#include "danube.dtsi"
-
-/ {
-       chosen {
-               bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
-       };
-
-       aliases {
-               led-boot = &power;
-               led-failsafe = &power;
-               led-running = &power;
-
-               led-dsl = &dsl;
-               led-internet = &online;
-               led-usb = &usb;
-               led-wifi = &wifi;
-       };
-
-       memory@0 {
-               reg = <0x0 0x4000000>;
-       };
-
-       sram@1F000000 {
-               vmmc@107000 {
-                       status = "okay";
-                       gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       fpi@10000000 {
-               localbus@0 {
-                       nor-boot@0 {
-                               compatible = "lantiq,nor";
-                               bank-width = <2>;
-                               reg = <0 0x0 0x2000000>;
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-
-                               partitions {
-                                       compatible = "fixed-partitions";
-                                       #address-cells = <1>;
-                                       #size-cells = <1>;
-
-                                       partition@0 {
-                                               label = "uboot";
-                                               reg = <0x00000 0x10000>; /* 64 KB */
-                                               read-only;
-                                       };
-
-                                       partition@10000 {
-                                               label = "uboot_env";
-                                               reg = <0x10000 0x10000>; /* 64 KB */
-                                               read-only;
-                                       };
-
-                                       partition@20000 {
-                                               label = "firmware";
-                                               reg = <0x20000 0x3d0000>;
-                                       };
-
-                                       boardconfig: partition@400000 {
-                                               label = "boardconfig";
-                                               reg = <0x3f0000 0x10000>;
-                                               read-only;
-                                       };
-                               };
-                       };
-
-                       gpiomm: gpiomm@4000000 {
-                               compatible = "lantiq,gpio-mm";
-                               reg = <1 0x0 0x10 >;
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               #gpio-cells = <2>;
-                               gpio-controller;
-                               lantiq,shadow = <0x0>;
-                       };
-
-                       ath5k_eep {
-                               compatible = "ath5k,eeprom";
-                               ath,eep-flash = <&boardconfig 0x400>;
-                               ath,mac-offset = <0x16>;
-                               ath,mac-increment = <1>;
-                               ath,eep-swap;
-                       };
-               };
-
-               gpio: pinmux@E100B10 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&state_default>;
-
-                       state_default: pinmux {
-                               ebu {
-                                       lantiq,groups = "ebu cs1";
-                                       lantiq,function = "ebu";
-                               };
-                               pci_in {
-                                       lantiq,groups = "req1", "req2";
-                                       lantiq,function = "pci";
-                                       lantiq,open-drain = <1>;
-                                       lantiq,pull = <2>;
-                                       lantiq,output = <0>;
-                               };
-                               pci_out {
-                                       lantiq,groups = "gnt1", "gnt2";
-                                       lantiq,function = "pci";
-                                       lantiq,pull = <0>;
-                                       lantiq,output = <1>;
-                               };
-                       };
-               };
-
-               etop@E180000 {
-                       phy-mode = "mii";
-                       mtd-mac-address = <&boardconfig 0x16>;
-               };
-
-               ifxhcd@E101000 {
-                       status = "okay";
-                       gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
-               };
-
-               pci@E105400 {
-                       status = "okay";
-                       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-                       req-mask = <0xf>;
-               };
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               power: power {
-                       label = "power";
-                       gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-               dsl: dsl {
-                       label = "dsl";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-               };
-               online: online {
-                       label = "online";
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-               };
-               wifi: wifi {
-                       label = "wifi";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-               };
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-               };
-               dsl2 {
-                       label = "dsl2";
-                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-               };
-               usb: usb {
-                       label = "usb";
-                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-               };
-               voice {
-                       label = "voice";
-                       gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
-               };
-               fxs1 {
-                       label = "fxs1";
-                       gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
-               };
-               fxs2 {
-                       label = "fxs2";
-                       gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
-               };
-               fxo {
-                       label = "fxo";
-                       gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
-               };
-       };
-};