lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)

[openwrt/openwrt.git] / target / linux / lantiq / base-files / etc / uci-defaults / 02_network

diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_network b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
index ac06e5f27826814e5362da80ff09ac16800277e5..ff21e02aea65291fd2301a3675ce2f333a856282 100644 (file)
--- a/target/linux/lantiq/base-files/etc/uci-defaults/02_network
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
@@ -32,9 +32,9 @@ set_adsl_modem() {
        local annex=$1
        local firmware=$2
        uci batch <<EOF
-set network.adsl='dsl-modem'
-set network.adsl.annex='$annex'
-set network.adsl.firmware='$firmware'
+set network.dsl='adsl'
+set network.dsl.annex='$annex'
+set network.dsl.firmware='$firmware'
 EOF
 }
 
@@ -44,11 +44,11 @@ set_vdsl_modem() {
        local tone=$3
        local xfer_mode=$4
        uci batch <<EOF
-set network.vdsl='dsl-modem'
-set network.vdsl.annex='$annex'
-set network.vdsl.firmware='$firmware'
-set network.vdsl.tone='$tone'
-set network.vdsl.xfer_mode='$xfer_mode'
+set network.dsl='vdsl'
+set network.dsl.annex='$annex'
+set network.dsl.firmware='$firmware'
+set network.dsl.tone='$tone'
+set network.dsl.xfer_mode='$xfer_mode'
 EOF
 }
 
@@ -68,7 +68,7 @@ payload="bridged"
 lan_mac=""
 wan_mac=""
 
-board=$(lantiq_board_id)
+board=$(lantiq_board_name)
 
 case "$board" in
 # adm6996
@@ -93,7 +93,7 @@ ACMP252|GIGASX76X)
        ;;
 
 # ar8316
-ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22)
+ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22)
        ucidef_set_interface_lan "eth0.1"
        ucidef_add_switch "switch0" "1" "1"
        ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
@@ -120,8 +120,6 @@ VG3503J)
        ;;
 
 DGN3500*)
-       lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
-       wan_mac=$(macaddr_add "$lan_mac" 1)
        ucidef_set_interface_lan "eth0.1"
        ucidef_add_switch "switch0" "1" "1"
        ucidef_add_switch_vlan "switch0" "1" "3 2 1 0 5t"
@@ -145,7 +143,9 @@ P2601HNFX)
        ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
        ;;
 
-P2812HNUFX)
+P2812HNUF*)
+       lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
+       wan_mac=$(macaddr_add "$lan_mac" 1)
        ucidef_set_interface_lan 'eth0.1'
        ucidef_add_switch "switch0" "1" "1"
        ucidef_add_switch_vlan "switch0" "1" "0 1 2 4 5 6t"
@@ -154,25 +154,50 @@ P2812HNUFX)
 TDW8970)
        lan_mac=$(mtd_get_mac_binary boardconfig 61696)
        wan_mac=$(macaddr_add "$lan_mac" 1)
+       ucidef_set_interface_lan 'eth0.1'
+       ucidef_add_switch "switch0" "1" "1"
+       ucidef_add_switch_vlan "switch0" "1" "0 2 4 5 6t"
        ;;
 
-ARV7519*)
+ARV7519RW22)
        lan_mac=$(mtd_get_mac_binary boardconfig 22)
        wan_mac=$(macaddr_add "$lan_mac" 1)
        ;;
 
-BTHOMEHUBV2B)
+BTHOMEHUBV2B|BTHOMEHUBV3A)
        lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
        wan_mac=$(macaddr_add "$lan_mac" 1)
        ;;
+
+BTHOMEHUBV5A)
+       lan_mac=$(mtd_get_mac_binary caldata 4364)
+       wan_mac=$(macaddr_add "$lan_mac" 1)
+       ucidef_set_interface_lan 'eth0.1'
+       ucidef_add_switch "switch0" "1" "1"
+       ucidef_add_switch_vlan "switch0" "1" "0 1 2 4 6t"
+       ;;
+
+VGV7519)
+       lan_mac=$(mtd_get_mac_binary board_config 22)
+       wan_mac=$(macaddr_add "$lan_mac" 1)
+       ;;
+
+VGV7510KW22)
+       lan_mac=$(mtd_get_mac_binary board_config 22)
+       wan_mac=$(macaddr_add "$lan_mac" 1)
+       ucidef_set_interface_lan 'eth0.1'
+       ucidef_add_switch "switch0" "1" "1"
+       ucidef_add_switch_vlan "switch0" "1" "2 3 4 5 6t"
+       ;;
+
 esac
 
 [ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload"
 
 if [ -n "$(grep "system type.*: VR9" /proc/cpuinfo)" ]; then
-       set_vdsl_modem "$annex" "vdsl.bin" "bv" "ptm"
+       set_vdsl_modem "$annex" "/lib/firmware/vdsl.bin" "av" "ptm"
 else
-       set_adsl_modem "$annex" "adsl.bin"
+       set_adsl_modem "$annex" "/lib/firmware/adsl.bin"
 fi
 
 [ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac