kirkwood: use generic diag.sh

[openwrt/openwrt.git] / target / linux / kirkwood / patches-4.19 / 107-02-nsa310b.patch

diff --git a/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch b/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch
index f8b963e03f248ce36f0cfac15b11940af3e77bac..5e2b1d8d9c3bc238a361c1caeac13e00d4b817ba 100644 (file)
--- a/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch
+++ b/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch
@@ -20,7 +20,7 @@ NOTE: this patch can be upstreamed as-is, LEDE-specific
        kirkwood-openblocks_a6.dtb \
 --- /dev/null
 +++ b/arch/arm/boot/dts/kirkwood-nsa310b.dts
-@@ -0,0 +1,124 @@
+@@ -0,0 +1,131 @@
 +/dts-v1/;
 +
 +#include "kirkwood-nsa3x0-common.dtsi"
@@ -34,6 +34,13 @@ NOTE: this patch can be upstreamed as-is, LEDE-specific
 +      model = "ZyXEL NSA310b";
 +      compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 +
++      aliases {
++              led-boot = &led_green_sys;
++              led-failsafe = &led_red_sys;
++              led-running = &led_green_sys;
++              led-upgrade = &led_red_sys;
++      };
++
 +      memory@0 {
 +              device_type = "memory";
 +              reg = <0x00000000 0x10000000>;
@@ -103,11 +110,11 @@ NOTE: this patch can be upstreamed as-is, LEDE-specific
 +      gpio-leds {
 +              compatible = "gpio-leds";
 +
-+              green-sys {
++              led_green_sys: green-sys {
 +                      label = "nsa310:green:sys";
 +                      gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 +              };
-+              red-sys {
++              led_red_sys: red-sys {
 +                      label = "nsa310:red:sys";
 +                      gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 +              };