ipq806x: add ipq4019 support

[openwrt/openwrt.git] / target / linux / ipq806x / patches-4.9 / 0026-dts-ipq4019-Add-support-for-IPQ4019-DK04-board.patch

diff --git a/target/linux/ipq806x/patches-4.9/0026-dts-ipq4019-Add-support-for-IPQ4019-DK04-board.patch b/target/linux/ipq806x/patches-4.9/0026-dts-ipq4019-Add-support-for-IPQ4019-DK04-board.patch
index 32c52b07ed9decc17085840ba50f6cff2a8c59b9..de0ea8e89a8776812de0d1e6547d05b3f10f6dee 100644 (file)
--- a/target/linux/ipq806x/patches-4.9/0026-dts-ipq4019-Add-support-for-IPQ4019-DK04-board.patch
+++ b/target/linux/ipq806x/patches-4.9/0026-dts-ipq4019-Add-support-for-IPQ4019-DK04-board.patch
@@ -32,40 +32,6 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
        qcom-ipq8064-ap148.dtb \
        qcom-msm8660-surf.dtb \
        qcom-msm8960-cdp.dtb \
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-@@ -109,11 +109,7 @@
-                       status = "ok";
-               };
- 
--                usb3_ss_phy: ssphy@0 {
--                        status = "ok";
--                };
--
--                dummy_ss_phy: ssphy@1 {
-+                usb3_ss_phy: ssphy@9a000 {
-                         status = "ok";
-                 };
- 
-@@ -121,15 +117,15 @@
-                         status = "ok";
-                 };
- 
--                usb2_hs_phy: hsphy@a8000 {
-+                usb3@0 {
-                         status = "ok";
-                 };
- 
--                usb3: usb3@8a00000 {
-+                usb2_hs_phy: hsphy@a8000 {
-                         status = "ok";
-                 };
- 
--                usb2: usb2@6000000 {
-+                usb2@0{
-                         status = "ok";
-                 };
-       };
 --- /dev/null
 +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
 @@ -0,0 +1,21 @@
@@ -142,13 +108,13 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
 +                              };
 +                      };
 +
-+                        serial_1_pins: serial1_pinmux {
-+                                mux {
-+                                        pins = "gpio8", "gpio9";
-+                                        function = "blsp_uart1";
-+                                        bias-disable;
-+                                };
-+                        };
++                       serial_1_pins: serial1_pinmux {
++                              mux {
++                                      pins = "gpio8", "gpio9";
++                                      function = "blsp_uart1";
++                                      bias-disable;
++                              };
++                      };
 +
 +                      spi_0_pins: spi_0_pinmux {
 +                              pinmux {
@@ -204,12 +170,12 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
 +                      };
 +              };
 +
-+                i2c_0: i2c@78b7000 { /* BLSP1 QUP2 */
-+                        pinctrl-0 = <&i2c_0_pins>;
-+                        pinctrl-names = "default";
++              i2c_0: i2c@78b7000 { /* BLSP1 QUP2 */
++                      pinctrl-0 = <&i2c_0_pins>;
++                      pinctrl-names = "default";
 +
 +                      status = "ok";
-+                };
++              };
 +
 +              serial@78af000 {
 +                      pinctrl-0 = <&serial_0_pins>;
@@ -217,31 +183,31 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
 +                      status = "ok";
 +              };
 +
-+                serial@78b0000 {
-+                        pinctrl-0 = <&serial_1_pins>;
-+                        pinctrl-names = "default";
-+                        status = "ok";
-+                };
++              serial@78b0000 {
++                      pinctrl-0 = <&serial_1_pins>;
++                      pinctrl-names = "default";
++                      status = "ok";
++              };
 +
-+                usb3_ss_phy: ssphy@9a000 {
-+                        status = "ok";
-+                };
++              usb3_ss_phy: ssphy@9a000 {
++                      status = "ok";
++              };
 +
-+                usb3_hs_phy: hsphy@a6000 {
-+                        status = "ok";
-+                };
++              usb3_hs_phy: hsphy@a6000 {
++                      status = "ok";
++              };
 +
-+                usb3: usb3@0 {
-+                        status = "ok";
-+                };
++              usb3: usb3@8af8800 {
++                      status = "ok";
++              };
 +
-+                usb2_hs_phy: hsphy@a8000 {
-+                        status = "ok";
-+                };
++              usb2_hs_phy: hsphy@a8000 {
++                      status = "ok";
++              };
 +
-+                usb2: usb2@6000000 {
-+                        status = "ok";
-+                };
++              usb2: usb2@60f8800 {
++                      status = "ok";
++              };
 +
 +              cryptobam: dma@8e04000 {
 +                      status = "ok";