define Device/Default
PROFILES := Default
- KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
- KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
- KERNEL_PREFIX := $$(IMAGE_PREFIX)
KERNEL_LOADADDR = 0x42208000
- SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
+ DEVICE_DTS_DIR = $$(DTS_DIR)/qcom
+ DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
+ DEVICE_DTS_CONFIG := config@1
+ IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
IMAGE/sysupgrade.bin/squashfs :=
endef
define Device/FitImage
KERNEL_SUFFIX := -fit-uImage.itb
- KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+ KERNEL = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
KERNEL_NAME := Image
endef
define Device/FitImageLzma
KERNEL_SUFFIX := -fit-uImage.itb
- KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
+ KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
KERNEL_NAME := Image
endef
define Device/UbiFit
KERNEL_IN_UBI := 1
- IMAGES := nand-factory.ubi nand-sysupgrade.bin
- IMAGE/nand-factory.ubi := append-ubi
+ IMAGES := nand-factory.bin nand-sysupgrade.bin
+ IMAGE/nand-factory.bin := append-ubi
IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
endef
-define Device/DniImage
- KERNEL_SUFFIX := -uImage
- KERNEL = kernel-bin | append-dtb | uImage none
- KERNEL_NAME := zImage
- NETGEAR_BOARD_ID :=
- NETGEAR_HW_ID :=
- UBINIZE_OPTS := -E 5
- IMAGES := factory.img sysupgrade.bin
- IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakeroot-hdr | pad-to $$$$(KERNEL_SIZE) | append-ubi | netgear-dni
- IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakeroot-hdr | sysupgrade-tar kernel=$$$$@ | append-metadata
-endef
-DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
-
-define Device/TpSafeImage
- KERNEL_SUFFIX := -uImage
- KERNEL = kernel-bin | append-dtb | uImage none
- KERNEL_NAME := zImage
- TPLINK_BOARD_ID :=
- IMAGES := factory.bin sysupgrade.bin
- IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
- IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | append-metadata
-endef
-DEVICE_VARS += TPLINK_BOARD_ID
-
-define Device/ZyXELImage
- KERNEL_SUFFIX := -uImage
- KERNEL = kernel-bin | append-dtb | uImage none | pad-to $${KERNEL_SIZE}
- KERNEL_NAME := zImage
- IMAGES := sysupgrade.bin mmcblk0p5-rootfs.bin mmcblk0p4-kernel.bin
- IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to $$$${BLOCKSIZE} | sysupgrade-tar rootfs=$$$$@ | append-metadata
- IMAGE/mmcblk0p5-rootfs.bin := append-rootfs | pad-rootfs | pad-to $$$${BLOCKSIZE}
- IMAGE/mmcblk0p4-kernel.bin := append-kernel
-endef
-
-define Device/avm_fritzbox-4040
- $(call Device/FitImageLzma)
- DEVICE_DTS := qcom-ipq4019-fritz4040
- KERNEL_LOADADDR := 0x80208000
- BLOCKSIZE := 4k
- PAGESIZE := 256
- BOARD_NAME := fritz4040
- DEVICE_TITLE := AVM Fritz!Box 4040
- IMAGE_SIZE := 29753344
- IMAGES = sysupgrade.bin
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
- DEVICE_PACKAGES := ipq-wifi-avm_fritzbox-4040 fritz-tffs fritz-caldata u-boot-fritz4040
-endef
-TARGET_DEVICES += avm_fritzbox-4040
-
-define Device/linksys_ea8500
- $(call Device/LegacyImage)
- DEVICE_DTS := qcom-ipq8064-ea8500
- PAGESIZE := 2048
- BLOCKSIZE := 128k
- KERNEL_SIZE := 3072k
- KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakeroot-hdr
- BOARD_NAME := ea8500
- SUPPORTED_DEVICES += ea8500
- UBINIZE_OPTS := -E 5
- IMAGES := factory.bin sysupgrade.bin
- IMAGE/factory.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-ubi
- DEVICE_TITLE := Linksys EA8500
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-TARGET_DEVICES += linksys_ea8500
-
-define Device/netgear_d7800
- $(call Device/DniImage)
- DEVICE_DTS := qcom-ipq8064-d7800
- KERNEL_SIZE := 2097152
- NETGEAR_BOARD_ID := D7800
- NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := d7800
- SUPPORTED_DEVICES += d7800
- DEVICE_TITLE := Netgear Nighthawk X4 D7800
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-TARGET_DEVICES += netgear_d7800
-
-define Device/netgear_r7500
- $(call Device/DniImage)
- DEVICE_DTS := qcom-ipq8064-r7500
- KERNEL_SIZE := 2097152
- NETGEAR_BOARD_ID := R7500
- NETGEAR_HW_ID := 29764841+0+128+256+3x3+4x4
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := r7500
- SUPPORTED_DEVICES += r7500
- DEVICE_TITLE := Netgear Nighthawk X4 R7500
- DEVICE_PACKAGES := ath10k-firmware-qca988x
-endef
-TARGET_DEVICES += netgear_r7500
-
-define Device/netgear_r7500v2
- $(call Device/DniImage)
- DEVICE_DTS := qcom-ipq8064-r7500v2
- KERNEL_SIZE := 2097152
- NETGEAR_BOARD_ID := R7500v2
- NETGEAR_HW_ID := 29764958+0+128+512+3x3+4x4
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := r7500v2
- SUPPORTED_DEVICES += r7500v2
- DEVICE_TITLE := Netgear Nighthawk X4 R7500v2
- DEVICE_PACKAGES := ath10k-firmware-qca99x0 ath10k-firmware-qca988x
-endef
-TARGET_DEVICES += netgear_r7500v2
-
-define Device/netgear_r7800
- $(call Device/DniImage)
- DEVICE_DTS := qcom-ipq8065-r7800
- KERNEL_SIZE := 2097152
- NETGEAR_BOARD_ID := R7800
- NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4+cascade
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := r7800
- SUPPORTED_DEVICES += r7800
- DEVICE_TITLE := Netgear Nighthawk X4S R7800
- DEVICE_PACKAGES := ath10k-firmware-qca9984
-endef
-TARGET_DEVICES += netgear_r7800
-
-define Device/openmesh_a42
- $(call Device/FitImageLzma)
- DEVICE_DTS := qcom-ipq4019-a42
- KERNEL_LOADADDR := 0x80208000
- BLOCKSIZE := 64k
- SUPPORTED_DEVICES := openmesh,a42
- DEVICE_TITLE := OpenMesh A42
- KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
- IMAGE_SIZE := 15616k
- IMAGES = factory.bin sysupgrade.bin
- IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
- IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
- DEVICE_PACKAGES := ath10k-firmware-qca4019 uboot-envtools ipq-wifi-openmesh_a42
-endef
-TARGET_DEVICES += openmesh_a42
-
-define Device/qcom_ap-dk01.1-c1
- DEVICE_TITLE := QCA AP-DK01.1-C1
- BOARD_NAME := ap-dk01.1-c1
- DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
- KERNEL_LOADADDR := 0x80208000
- KERNEL_INSTALL := 1
- KERNEL_SIZE := 4096k
- IMAGE_SIZE := 26624k
- $(call Device/FitImage)
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
- DEVICE_PACKAGES := ath10k-firmware-qca4019
-endef
-TARGET_DEVICES += qcom_ap-dk01.1-c1
-
-define Device/qcom_ap-dk04.1-c1
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
- KERNEL_LOADADDR := 0x80208000
- KERNEL_INSTALL := 1
- KERNEL_SIZE := 4048k
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := ap-dk04.1-c1
- DEVICE_TITLE := QCA AP-DK04.1-C1
-endef
-TARGET_DEVICES += qcom_ap-dk04.1-c1
-
-define Device/qcom_ipq8064-ap148
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_DTS := qcom-ipq8064-ap148
- KERNEL_INSTALL := 1
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := ap148
- SUPPORTED_DEVICES += ap148
- DEVICE_TITLE := Qualcomm AP148
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-TARGET_DEVICES += qcom_ipq8064-ap148
-
-define Device/qcom_ipq8064-ap148-legacy
- $(call Device/LegacyImage)
- $(call Device/UbiFit)
- DEVICE_DTS := qcom-ipq8064-ap148
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := ap148
- SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
- DEVICE_TITLE := Qualcomm AP148 (legacy)
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-TARGET_DEVICES += qcom_ipq8064-ap148-legacy
-
-define Device/qcom_ipq8064-db149
- $(call Device/FitImage)
- DEVICE_DTS := qcom-ipq8064-db149
- KERNEL_INSTALL := 1
- BOARD_NAME := db149
- DEVICE_TITLE := Qualcomm DB149
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-TARGET_DEVICES += qcom_ipq8064-db149
-
-define Device/tplink_c2600
- $(call Device/TpSafeImage)
- DEVICE_DTS := qcom-ipq8064-c2600
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := c2600
- SUPPORTED_DEVICES += c2600
- TPLINK_BOARD_ID := C2600
- DEVICE_TITLE := TP-Link Archer C2600
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
-endef
-TARGET_DEVICES += tplink_c2600
-
-define Device/tplink_vr2600v
- KERNEL_SUFFIX := -uImage
- KERNEL = kernel-bin | append-dtb | uImage none
- KERNEL_NAME := zImage
- KERNEL_SIZE := 2097152
- DEVICE_DTS := qcom-ipq8064-vr2600v
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- BOARD_NAME := vr2600v
- SUPPORTED_DEVICES += vr2600v
- DEVICE_TITLE := TP-Link Archer VR2600v
- DEVICE_PACKAGES := ath10k-firmware-qca99x0
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
-endef
-TARGET_DEVICES += tplink_vr2600v
-
-define Device/zyxel_nbg6817
- DEVICE_DTS := qcom-ipq8065-nbg6817
- KERNEL_SIZE := 4096k
- BLOCKSIZE := 64k
- BOARD_NAME := nbg6817
- SUPPORTED_DEVICES += nbg6817
- DEVICE_TITLE := ZyXEL NBG6817
- DEVICE_PACKAGES := ath10k-firmware-qca9984 e2fsprogs kmod-fs-ext4 losetup
- $(call Device/ZyXELImage)
-endef
-TARGET_DEVICES += zyxel_nbg6817
+include $(SUBTARGET).mk
$(eval $(call BuildImage))
projects / openwrt / openwrt.git / blobdiff