gemini: Bump to kernel v6.6

[openwrt/openwrt.git] / target / linux / generic / pending-6.6 / 745-13-net-dsa-mt7530-use-priv-ds-num_ports-instead-of-MT75.patch

diff --git a/target/linux/generic/pending-6.6/745-13-net-dsa-mt7530-use-priv-ds-num_ports-instead-of-MT75.patch b/target/linux/generic/pending-6.6/745-13-net-dsa-mt7530-use-priv-ds-num_ports-instead-of-MT75.patch
deleted file mode 100644 (file)
index f63d4d7..0000000
--- a/target/linux/generic/pending-6.6/745-13-net-dsa-mt7530-use-priv-ds-num_ports-instead-of-MT75.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 6efc8ae3eb0363328f479191a0cf0dc12a16e090 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:20 +0300
-Subject: [PATCH 13/15] net: dsa: mt7530: use priv->ds->num_ports instead of
- MT7530_NUM_PORTS
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use priv->ds->num_ports on all for loops which configure the switch
-registers. In the future, the value of MT7530_NUM_PORTS will depend on
-priv->id. Therefore, this change prepares the subdriver for a simpler
-implementation.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1411,7 +1411,7 @@ mt7530_port_set_vlan_unaware(struct dsa_
-       mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
-                  G0_PORT_VID_DEF);
- 
--      for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+      for (i = 0; i < priv->ds->num_ports; i++) {
-               if (dsa_is_user_port(ds, i) &&
-                   dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) {
-                       all_user_ports_removed = false;
-@@ -2428,7 +2428,7 @@ mt7530_setup(struct dsa_switch *ds)
-       /* Enable and reset MIB counters */
-       mt7530_mib_reset(ds);
- 
--      for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+      for (i = 0; i < priv->ds->num_ports; i++) {
-               /* Clear link settings and enable force mode to force link down
-                * on all ports until they're enabled later.
-                */
-@@ -2539,7 +2539,7 @@ mt7531_setup_common(struct dsa_switch *d
-       mt7530_clear(priv, MT753X_MFC, BC_FFP_MASK | UNM_FFP_MASK |
-                    UNU_FFP_MASK);
- 
--      for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+      for (i = 0; i < priv->ds->num_ports; i++) {
-               /* Clear link settings and enable force mode to force link down
-                * on all ports until they're enabled later.
-                */
-@@ -2626,7 +2626,7 @@ mt7531_setup(struct dsa_switch *ds)
-       priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN);
- 
-       /* Force link down on all ports before internal reset */
--      for (i = 0; i < MT7530_NUM_PORTS; i++)
-+      for (i = 0; i < priv->ds->num_ports; i++)
-               mt7530_write(priv, MT753X_PMCR_P(i), MT7531_FORCE_MODE_LNK);
- 
-       /* Reset the switch through internal reset */