START=05
start() {
- [ -e /etc/config/network ] && exit 0
+ [ -e /etc/config/network ] && {
+ local batch
+
+ config_cb() {
+ case "$1" in
+ switch)
+ option_cb() {
+ case "$1" in
+ vlan[0-9]|vlan1[0-5])
+ local id="${1#vlan}"
+ append batch "delete network.eth0.${1}${N}"
+ append batch "set network.eth0_${id}=switch_vlan${N}"
+ append batch "set network.eth0_${id}.device=eth0${N}"
+ append batch "set network.eth0_${id}.vlan=${id}${N}"
+ append batch "set network.eth0_${id}.ports='${2}'${N}"
+ ;;
+ esac
+ }
+ ;;
+ switch_vlan)
+ option_cb() { :; }
+ batch=""
+ ;;
+ esac
+ }
+
+ config_load network
+
+ [ -n "$batch" ] && {
+ logger -t netconfig "migrating switch config to new format ..."
+ echo "$batch${N}commit network" | uci batch
+ }
+
+ exit 0
+ }
mkdir -p /etc/config
# WGT634u
echo boardtype=wgt634u
else
- strings /dev/mtdblock/3
+ strings "$(find_mtd_part nvram)"
fi
) | awk '
function p(cfgname, name) {
if (c[name] != "") print " option " cfgname " \"" c[name] "\""
}
+ function vlan(id, name) {
+ if (c[name] != "") {
+ print "config switch_vlan eth0_" id
+ print " option device \"eth0\""
+ print " option vlan " id
+ print " option ports \"" c[name] "\""
+ print ""
+ }
+ }
+
function macinc(mac, maca, i, result) {
split(mac, maca, ":")
for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
}
}
-
+
($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
nvram[$1] = $2
}
-
+
END {
if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
c["wan_ifname"] = ""
c["lan_ifname"] = "eth1"
}
+ if (model == "ASUS WL-330gE") {
+ c["wan_ifname"] = ""
+ c["lan_ifname"] = "eth0"
+ c["vlan0ports"] = ""
+ c["vlan1ports"] = ""
+ }
if (model == "ASUS WL-500g") {
c["wan_ifname"] = "eth1"
c["lan_ifname"] = "eth0"
}
+ if (model == "ASUS WL-500g Premium V2") {
+ c["vlan0ports"] = "0 1 2 3 5*"
+ c["vlan1ports"] = "4 5"
+ }
+ if (model == "Dell TrueMobile 2300") {
+ c["lan_ifname"] = "eth0"
+ c["wan_ifname"] = "eth1"
+ c["vlan0ports"] = "0 1 2 3 4 5u"
+ c["vlan1ports"] = ""
+ }
+ if (model == "Dell TrueMobile 2300 v2") {
+ c["vlan0ports"] = "0 1 2 3 5*"
+ c["vlan1ports"] = "4 5"
+ }
if (nvram["boardtype"] == "bcm94710r4") {
# Toshiba WRC-1000
c["lan_ifname"] = "eth0"
}
}
}
+ # Buffalo WBR-B11 and Buffalo WBR-G54
+ if (nvram["boardtype"] == "bcm94710ap") {
+ c["vlan0ports"] = "0 1 2 3 4 5u"
+ c["vlan1ports"] = ""
+ c["lan_ifname"] = "eth0"
+ c["wan_ifname"] = "eth1"
+ }
+ # generic broadcom 4705/4785 processor with 5397 switch?
+ # EXCEPT Linksys WRT300N V1.1
+ if ((nvram["boardtype"] == "0x478") && \
+ (model != "Linksys WRT300N V1.1")) {
+ c["vlan0ports"] = "1 2 3 4 8*"
+ c["vlan1ports"] = "0 8"
+ }
# WAP54G
if ((nvram["boardnum"] == "2") || \
c["lan_ifname"]="eth0"
c["wan_ifname"]=""
}
-
- print "#### VLAN configuration "
- print "config switch eth0"
- p("vlan0", "vlan0ports")
- p("vlan1", "vlan1ports")
- print ""
- print ""
+
+ # Sitecom WL-105b
+ if ((nvram["boardum"] == "2") && \
+ (nvram["GemtekPmonVer"] == "1")) {
+ c["lan_ifname"]="eth0"
+ c["wan_ifname"]=""
+ }
+
+ # ASUS WL-700gE
+ # These are actually same as defaults above. For some reason this script applies
+ # Generic BCM94704 settings instead so we revert to proper settings here.
+ # Hopefully someone will fix this properly soon.
+ if (model == "ASUS WL-700gE") {
+ c["lan_ifname"]="eth0.0"
+ c["wan_ifname"]="eth0.1"
+ c["vlan0ports"]="1 2 3 4 5*"
+ c["vlan1ports"]="0 5"
+ }
+
+ if (model == "Motorola WR850G V2/V3") {
+ c["vlan0ports"]="0 1 2 3 5*"
+ c["vlan1ports"]="4 5"
+ }
+ if (model == "ASUS WL-500W") {
+ c["lan_ifname"] = "eth0"
+ c["wan_ifname"] = "eth1"
+ c["vlan0ports"] = "0 1 2 3 4 5u"
+ c["vlan1ports"] = ""
+ }
+
+ if (c["vlan0ports"] || c["vlan1ports"]) {
+ print "#### VLAN configuration "
+ print "config switch eth0"
+ print " option enable 1"
+ print ""
+ vlan(0, "vlan0ports")
+ vlan(1, "vlan1ports")
+ }
print "#### Loopback configuration"
print "config interface loopback"
print " option ifname \"lo\""
print " option netmask 255.255.255.0"
print ""
print ""
- print "#### WAN configuration"
- print "config interface wan"
- p("ifname", "wan_ifname")
- p("macaddr", "wan_macaddr")
- print " option proto dhcp"
+ if (c["wan_ifname"]) {
+ print "#### WAN configuration"
+ print "config interface wan"
+ p("ifname", "wan_ifname")
+ p("macaddr", "wan_macaddr")
+ print " option proto dhcp"
+ } else {
+ print "#### WAN configuration (disabled)"
+ print "#config interface wan"
+ print "# option proto dhcp"
+ }
}' > /etc/config/network
}
projects / openwrt / openwrt.git / blobdiff