ar71xx: add support for the Senao EAP7660D board

[openwrt/openwrt.git] / target / linux / ar71xx / image / Makefile

diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index 42d67ca838bd2919ca1dd34dd7aec00d449d4fa3..fc93a17196e4e69405297331dbcd9e38943f5673 100644 (file)
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -212,14 +212,16 @@ define Image/Build/AP83
 endef
 
 define Image/Build/PB92
-       $(call PatchKernelGzip,$(2),$(3))
-       if [ `stat -c%s $(KDIR)/root.$(1)` -gt 2818048 ]; then \
+       $(call PatchKernelLzma,$(2),$(3))
+       if [ `stat -c%s $(KDIR)/vmlinux-$(2).bin.lzma` -gt 917504 ]; then \
+               echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big"; \
+       elif [ `stat -c%s $(KDIR)/root.$(1)` -gt 2818048 ]; then \
                echo "Warning: $(KDIR)/root.$(1) is too big"; \
        else \
-               mkimage -A mips -O linux -T kernel -a 0x80060000 -C gzip -e \
+               mkimage -A mips -O linux -T kernel -a 0x80060000 -C lzma -e \
                        0x80060000 \
                        -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-                       -d $(KDIR)/vmlinux-$(2).bin.gz \
+                       -d $(KDIR)/vmlinux-$(2).bin.lzma \
                        $(KDIR)/vmlinux-$(2).uImage; \
                dd if=$(KDIR)/vmlinux-$(2).uImage \
                        of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \
@@ -294,13 +296,13 @@ define Image/Build/Planex
                        -d $(KDIR)/vmlinux-$(2).bin.gz $(KDIR)/vmlinux-$(2).uImage; \
                ( \
                        dd if=$(KDIR)/vmlinux-$(2).uImage bs=1408k conv=sync; \
-                       dd if=$(KDIR)/root.$(1) bs=6208k conv=sync; \
-               ) > $(call imgname,$(1),$(2)).bin; \
+                       dd if=$(KDIR)/root.$(1); \
+               ) > $(call imgname,$(1),$(2))-sysupgrade.bin; \
                $(STAGING_DIR_HOST)/bin/mkplanexfw \
                        -B $(2) \
                        -v 2.00.00 \
-                       -i $(call imgname,$(1),$(2)).bin \
-                       -o $(call imgname,$(1),$(2)).webui; \
+                       -i $(call imgname,$(1),$(2))-sysupgrade.bin \
+                       -o $(call imgname,$(1),$(2))-factory.bin; \
        fi; fi
 endef
 
@@ -450,6 +452,10 @@ define Image/Build/Profile/DIR600A1
        $(call Image/Build/Template/$(fs_64k)/$(1),Cameo7240,dir-600-a1,board=DIR-600-A1,"AP91-AR7240-RT-090223-00")
 endef
 
+define Image/Build/Profile/EAP7660D
+       $(call Image/Build/Template/$(fs_128k)/$(1),PB4X,eap7660d,board=EAP7660D)
+endef
+
 define Image/Build/Profile/FR54RTR
        $(call Image/Build/Template/$(fs_64k)/$(1),Cameo7240,fr-54rtr,board=DIR-600-A1,"AP91-AR7240-RT-090223-01")
 endef
@@ -570,6 +576,7 @@ define Image/Build/Profile/Default
        $(call Image/Build/Profile/DIR600A1,$(1))
        $(call Image/Build/Profile/DIR615C1,$(1))
        $(call Image/Build/Profile/DIR825B1,$(1))
+       $(call Image/Build/Profile/EAP7660D,$(1))
        $(call Image/Build/Profile/FR54RTR,$(1))
        $(call Image/Build/Profile/MZKW04NU,$(1))
        $(call Image/Build/Profile/MZKW300NH,$(1))
@@ -594,7 +601,12 @@ define Image/Build/Profile/Default
        $(call Image/Build/Profile/WZRHPG300NH,$(1))
 endef
 
+define Image/Build/Profile/Minimal
+       $(call Image/Build/Profile/Default,$(1))
+endef
+
 define Image/Build/Profile/Madwifi
+       $(call Image/Build/Profile/EAP7660D,$(1))
        $(call Image/Build/Profile/UBNTRS,$(1))
        $(call Image/Build/Profile/UBNTRSPRO,$(1))
        $(call Image/Build/Profile/UBNTLSSR71,$(1))