ar71xx: fix switch port numbering on RB750r2 and RB750UPr2

[openwrt/openwrt.git] / target / linux / ar71xx / base-files / etc / board.d / 02_network

diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 10f84bf71716d4a174536e6b3ab7841e3041d512..6d8a5c3d0a86a627663dee6e2905e03d5dec99fb 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -42,7 +42,6 @@ ar71xx_setup_interfaces()
        tl-mr3420|\
        tl-wdr3320-v2|\
        tl-wdr3500|\
-       tl-wr741nd|\
        tl-wr741nd-v4|\
        tl-wr841n-v11|\
        tl-wr841n-v9|\
@@ -61,6 +60,7 @@ ar71xx_setup_interfaces()
        antminer-s1|\
        antminer-s3|\
        antrouter-r1|\
+       ap121f|\
        aw-nr580|\
        bullet-m|\
        c-55|\
@@ -122,6 +122,7 @@ ar71xx_setup_interfaces()
        a60|\
        alfa-ap96|\
        alfa-nx|\
+       dr344|\
        gl-ar150|\
        gl-ar300m|\
        gl-domino|\
@@ -141,11 +142,16 @@ ar71xx_setup_interfaces()
        wrtnode2q)
                ucidef_set_interfaces_lan_wan "eth1" "eth0"
                ;;
+       rb-750-r2|\
+       rb-750up-r2)
+               ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
+               ucidef_add_switch "switch0" \
+                       "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
+               ;;
        all0258n|\
        all0315n|\
        dlan-hotspot|\
        dlan-pro-500-wp|\
-       dr344|\
        ja76pf2|\
        rocket-m-ti|\
        ubnt-unifi-outdoor)
@@ -400,6 +406,7 @@ ar71xx_setup_interfaces()
                ucidef_set_interface_raw "eth" "eth0"
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
                ;;
+       tl-wr741nd|\
        tl-wr841n-v7)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
                ucidef_add_switch "switch0" \
@@ -480,7 +487,8 @@ ar71xx_setup_macs()
                wan_mac=$(mtd_get_mac_binary caldata 6)
                ;;
        tl-wr1043nd-v4)
-               wan_mac=$(mtd_get_mac_binary config 0x1017c)
+               lan_mac=$(mtd_get_mac_binary product-info 8)
+               wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
        esr900)
                wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")