ar71xx: add support for TP-Link TL-WA850RE v2

[openwrt/openwrt.git] / target / linux / ar71xx / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 57925c5aaebe39e1711d764e67f0e3d7063a5774..ee67899d4f1bf66a0585816fcd1153b1068f803e 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -11,6 +11,14 @@ board_config_update
 board=$(ar71xx_board_name)
 
 case "$board" in
+a40)
+       ucidef_set_led_default "status-red" "Status (red)" "a40:red:status" "0"
+       ucidef_set_led_default "status-blue" "Status (blue)" "a40:blue:status" "0"
+       ;;
+a60)
+       ucidef_set_led_default "status-red" "Status (red)" "a60:red:status" "0"
+       ucidef_set_led_default "status-blue" "Status (blue)" "a60:blue:status" "0"
+       ;;
 airgateway|\
 airgatewaypro)
        ucidef_set_led_wlan "wlan" "WLAN" "ubnt:blue:wlan" "phy0tpt"
@@ -41,6 +49,19 @@ antrouter-r1)
        ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
        ucidef_set_led_default "btc" "BTC" "$board:green:btc" "0"
        ;;
+archer-c59-v1|\
+archer-c60-v1)
+       ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x3C"
+       ucidef_set_led_switch "wan" "WAN" "$board:green:wan" "switch0" "0x02"
+       ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
+       ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
+
+       case "$board" in
+       archer-c59-v1)
+               ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1"
+               ;;
+       esac
+       ;;
 arduino-yun)
        ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
        ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1"
@@ -392,9 +413,11 @@ nbg6716)
        ;;
 om2p|\
 om2pv2|\
+om2pv4|\
 om2p-hs|\
 om2p-hsv2|\
 om2p-hsv3|\
+om2p-hsv4|\
 om2p-lc)
        ucidef_set_led_netdev "port1" "port1" "om2p:blue:wan" "eth0"
        ucidef_set_led_netdev "port2" "port2" "om2p:blue:lan" "eth1"
@@ -431,6 +454,10 @@ omy-x1)
        ucidef_set_led_default "power" "POWER" "omy:green:power" "1"
        ucidef_set_led_default "wan" "WAN" "omy:green:wan" "eth0"
        ;;
+pqi-air-pen)
+       ucidef_set_led_wlan "wlan" "WLAN" "pqi-air-pen:blue:wlan" "phy0tpt"
+       ucidef_set_led_default "wps" "WPS" "pqi-air-pen:blue:wps" "0"
+       ;;
 qihoo-c301)
        ucidef_set_led_wlan "wlan2g" "WLAN2G" "qihoo:red:status" "phy1tpt"
        ;;
@@ -440,6 +467,10 @@ re450)
        ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan2g" "phy1tpt"
        ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan5g" "phy0tpt"
        ;;
+sc1750|\
+sc450)
+       ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
+       ;;
 smart-300)
        ucidef_set_led_netdev "wan" "WAN" "nc-link:green:wan" "eth0"
        ucidef_set_led_switch "lan1" "LAN1" "nc-link:green:lan1" "switch0" "0x04"
@@ -543,7 +574,8 @@ tl-wa801nd-v3)
        ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth1"
        ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
        ;;
-tl-wa850re)
+tl-wa850re|\
+tl-wa850re-v2)
        ucidef_set_led_netdev "lan" "LAN" "tp-link:blue:lan" "eth0"
        ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:wlan" "phy0tpt"
        ucidef_set_rssimon "wlan0" "200000" "1"