ar71xx: add support to TP-Link Archer C59v1 and C60v1

[openwrt/openwrt.git] / target / linux / ar71xx / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 84cfb1e616de59749fb2df5ccae74fa3efd5b00b..b1ecb0204f1575face438e854954bc5eda087981 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -41,6 +41,19 @@ antrouter-r1)
        ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
        ucidef_set_led_default "btc" "BTC" "$board:green:btc" "0"
        ;;
+archer-c59-v1|\
+archer-c60-v1)
+       ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x3C"
+       ucidef_set_led_switch "wan" "WAN" "$board:green:wan" "switch0" "0x02"
+       ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
+       ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
+
+       case "$board" in
+       archer-c59-v1)
+               ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1"
+               ;;
+       esac
+       ;;
 arduino-yun)
        ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
        ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1"
@@ -282,6 +295,7 @@ gl-mifi)
        esac
        ;;
 gl-domino|\
+sc300m|\
 wrt160nl)
        ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
        ;;
@@ -430,6 +444,10 @@ omy-x1)
        ucidef_set_led_default "power" "POWER" "omy:green:power" "1"
        ucidef_set_led_default "wan" "WAN" "omy:green:wan" "eth0"
        ;;
+pqi-air-pen)
+       ucidef_set_led_wlan "wlan" "WLAN" "pqi-air-pen:blue:wlan" "phy0tpt"
+       ucidef_set_led_default "wps" "WPS" "pqi-air-pen:blue:wps" "0"
+       ;;
 qihoo-c301)
        ucidef_set_led_wlan "wlan2g" "WLAN2G" "qihoo:red:status" "phy1tpt"
        ;;
@@ -439,6 +457,10 @@ re450)
        ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan2g" "phy1tpt"
        ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan5g" "phy0tpt"
        ;;
+sc1750|\
+sc450)
+       ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
+       ;;
 smart-300)
        ucidef_set_led_netdev "wan" "WAN" "nc-link:green:wan" "eth0"
        ucidef_set_led_switch "lan1" "LAN1" "nc-link:green:lan1" "switch0" "0x04"