broadcom-diag: support for the WNDR3700v3

[openwrt/openwrt.git] / package / broadcom-diag / src / gpio.h

diff --git a/package/broadcom-diag/src/gpio.h b/package/broadcom-diag/src/gpio.h
index 575fd8c4719d43bbf40cb7f87ff54da06ec028e0..8bd3fe02f80da11f38e298298b4bec1cbe0b6950 100644 (file)
--- a/package/broadcom-diag/src/gpio.h
+++ b/package/broadcom-diag/src/gpio.h
@@ -1,54 +1,22 @@
 #ifndef __DIAG_GPIO_H
 #define __DIAG_GPIO_H
+
 #include <linux/interrupt.h>
+#include <linux/ssb/ssb_embedded.h>
 #include <linux/gpio.h>
-#include <asm/mach-bcm47xx/bcm47xx.h>
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,0,0)
-#define ssb_bcm47xx bcm47xx_bus.ssb
-#endif
-
-static inline u32 __ssb_write32_masked(struct ssb_device *dev, u16 offset,
-                                      u32 mask, u32 value)
-{
-       value &= mask;
-       value |= ssb_read32(dev, offset) & ~mask;
-       ssb_write32(dev, offset, value);
-       return value;
-}
-
-static void gpio_set_irqenable(int enabled, irqreturn_t (*handler)(int, void *))
-{
-       int irq;
-
-       irq = gpio_to_irq(0);
-       if (irq == -EINVAL) return;
-       
-       if (enabled) {
-               if (request_irq(irq, handler, IRQF_SHARED | IRQF_SAMPLE_RANDOM, "gpio", handler))
-                       return;
-       } else {
-               free_irq(irq, handler);
-       }
-
-       if (ssb_bcm47xx.chipco.dev)
-               __ssb_write32_masked(ssb_bcm47xx.chipco.dev, SSB_CHIPCO_IRQMASK, SSB_CHIPCO_IRQ_GPIO, (enabled ? SSB_CHIPCO_IRQ_GPIO : 0));
-}
+#include <bcm47xx.h>
 
 #define EXTIF_ADDR 0x1f000000
 #define EXTIF_UART (EXTIF_ADDR + 0x00800000)
 
+/* GPIO pins driving LEDs through a shift register */
+#define SHIFTREG_DATA          (1 << 6)
+#define SHIFTREG_CLK           (1 << 7)
+#define SHIFTREG_MAX_BITS      8
+
 #define GPIO_TYPE_NORMAL       (0x0 << 24)
 #define GPIO_TYPE_EXTIF        (0x1 << 24)
+#define GPIO_TYPE_SHIFT                (0x2 << 24)
 #define GPIO_TYPE_MASK         (0xf << 24)
 
-static inline void gpio_set_extif(int gpio, int value)
-{
-       volatile u8 *addr = (volatile u8 *) KSEG1ADDR(EXTIF_UART) + (gpio & ~GPIO_TYPE_MASK);
-       if (value)
-               *addr = 0xFF;
-       else
-               *addr;
-}
-
 #endif /* __DIAG_GPIO_H */