--- /dev/null
+From 0931604ba1483850cd69de30ee5d52d251e15418 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Mon, 2 May 2016 15:25:22 -0400
+Subject: [PATCH] rtl8xxxu: Add bit definitions for REG_USB_SPECIAL_OPTION
+
+Documentation for enabling USB aggregation and whether to select
+interrupt or bulk delivery of interrupt events.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
+@@ -1052,6 +1052,10 @@
+ #define USB_HIMR_ROK BIT(0) /* Receive DMA OK Interrupt */
+
+ #define REG_USB_SPECIAL_OPTION 0xfe55
++#define USB_SPEC_USB_AGG_ENABLE BIT(3) /* Enable USB aggregation */
++#define USB_SPEC_INT_BULK_SELECT BIT(4) /* Use interrupt endpoint to
++ deliver interrupt packet.
++ 0: Use int, 1: use bulk */
+ #define REG_USB_HRPWM 0xfe58
+ #define REG_USB_DMA_AGG_TO 0xfe5b
+ #define REG_USB_AGG_TO 0xfe5c
--- /dev/null
+From 479bd5f91ac89837def3fe2b31ae8ee720d6ff94 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Mon, 2 May 2016 15:59:00 -0400
+Subject: [PATCH] rtl8xxxu: Add additional documentation for RX DMA registers
+
+This also renames REG_USB_AGG_{TO,TH} to REG_USB_AGG_{TIMEOUT,THRESH}
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 10 +++++++---
+ 1 file changed, 7 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
+@@ -405,7 +405,11 @@
+ #define REG_DWBCN1_CTRL_8723B 0x0228
+
+ /* 0x0280 ~ 0x02FF RXDMA Configuration */
+-#define REG_RXDMA_AGG_PG_TH 0x0280
++#define REG_RXDMA_AGG_PG_TH 0x0280 /* 0-7 : USB DMA size bits
++ 8-14: USB DMA timeout
++ 15 : Aggregation enable
++ Only seems to be used
++ on 8723bu/8192eu */
+ #define RXDMA_USB_AGG_ENABLE BIT(31)
+ #define REG_RXPKT_NUM 0x0284
+ #define RXPKT_NUM_RXDMA_IDLE BIT(17)
+@@ -1058,8 +1062,8 @@
+ 0: Use int, 1: use bulk */
+ #define REG_USB_HRPWM 0xfe58
+ #define REG_USB_DMA_AGG_TO 0xfe5b
+-#define REG_USB_AGG_TO 0xfe5c
+-#define REG_USB_AGG_TH 0xfe5d
++#define REG_USB_AGG_TIMEOUT 0xfe5c
++#define REG_USB_AGG_THRESH 0xfe5d
+
+ #define REG_NORMAL_SIE_VID 0xfe60 /* 0xfe60 - 0xfe61 */
+ #define REG_NORMAL_SIE_PID 0xfe62 /* 0xfe62 - 0xfe63 */
--- /dev/null
+From da21652f72bbdcec7dd8fe61ae32f28608f90c85 Mon Sep 17 00:00:00 2001
+From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+Date: Thu, 26 May 2016 17:52:19 +0300
+Subject: [PATCH] rtl8xxxu: tuse %*ph to dump buffers
+
+Use %*ph specifier to dump small buffers in hex format instead of doing this
+byte-by-byte.
+
+Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c | 9 ++-------
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c | 9 ++-------
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c | 9 ++-------
+ 3 files changed, 6 insertions(+), 21 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
+@@ -413,13 +413,8 @@ static int rtl8192cu_parse_efuse(struct
+ dev_info(&priv->udev->dev,
+ "%s: dumping efuse (0x%02zx bytes):\n",
+ __func__, sizeof(struct rtl8192cu_efuse));
+- for (i = 0; i < sizeof(struct rtl8192cu_efuse); i += 8) {
+- dev_info(&priv->udev->dev, "%02x: "
+- "%02x %02x %02x %02x %02x %02x %02x %02x\n", i,
+- raw[i], raw[i + 1], raw[i + 2],
+- raw[i + 3], raw[i + 4], raw[i + 5],
+- raw[i + 6], raw[i + 7]);
+- }
++ for (i = 0; i < sizeof(struct rtl8192cu_efuse); i += 8)
++ dev_info(&priv->udev->dev, "%02x: %8ph\n", i, &raw[i]);
+ }
+ return 0;
+ }
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
+@@ -622,13 +622,8 @@ static int rtl8192eu_parse_efuse(struct
+ dev_info(&priv->udev->dev,
+ "%s: dumping efuse (0x%02zx bytes):\n",
+ __func__, sizeof(struct rtl8192eu_efuse));
+- for (i = 0; i < sizeof(struct rtl8192eu_efuse); i += 8) {
+- dev_info(&priv->udev->dev, "%02x: "
+- "%02x %02x %02x %02x %02x %02x %02x %02x\n", i,
+- raw[i], raw[i + 1], raw[i + 2],
+- raw[i + 3], raw[i + 4], raw[i + 5],
+- raw[i + 6], raw[i + 7]);
+- }
++ for (i = 0; i < sizeof(struct rtl8192eu_efuse); i += 8)
++ dev_info(&priv->udev->dev, "%02x: %8ph\n", i, &raw[i]);
+ }
+ return 0;
+ }
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
+@@ -466,13 +466,8 @@ static int rtl8723bu_parse_efuse(struct
+ dev_info(&priv->udev->dev,
+ "%s: dumping efuse (0x%02zx bytes):\n",
+ __func__, sizeof(struct rtl8723bu_efuse));
+- for (i = 0; i < sizeof(struct rtl8723bu_efuse); i += 8) {
+- dev_info(&priv->udev->dev, "%02x: "
+- "%02x %02x %02x %02x %02x %02x %02x %02x\n", i,
+- raw[i], raw[i + 1], raw[i + 2],
+- raw[i + 3], raw[i + 4], raw[i + 5],
+- raw[i + 6], raw[i + 7]);
+- }
++ for (i = 0; i < sizeof(struct rtl8723bu_efuse); i += 8)
++ dev_info(&priv->udev->dev, "%02x: %8ph\n", i, &raw[i]);
+ }
+
+ return 0;
--- /dev/null
+From 650902b7a7e02064fc295eed9ac4c86cf7435f3b Mon Sep 17 00:00:00 2001
+From: Luis de Bethencourt <luisbg@osg.samsung.com>
+Date: Fri, 10 Jun 2016 14:57:34 +0100
+Subject: [PATCH] rtl8xxxu: remove unneeded assignments
+
+reg_eac and reg_ecc are only used if candidate is bigger than 0, and in
+that case new values will be given to them. Removing the unused
+assignments.
+
+Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c | 2 --
+ 1 file changed, 2 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
+@@ -1244,11 +1244,9 @@ static void rtl8192eu_phy_iq_calibrate(s
+ reg_e94 = result[i][0];
+ reg_e9c = result[i][1];
+ reg_ea4 = result[i][2];
+- reg_eac = result[i][3];
+ reg_eb4 = result[i][4];
+ reg_ebc = result[i][5];
+ reg_ec4 = result[i][6];
+- reg_ecc = result[i][7];
+ }
+
+ if (candidate >= 0) {
--- /dev/null
+From d39e7f8bbab83a2a4145fb8b4701882ef8ba0eeb Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Thu, 23 Jun 2016 12:37:38 -0400
+Subject: [PATCH] rtl8xxxu: Reduce console noise when removing the kernel
+ module
+
+USB urbs will return with a status != 0 when rmmod'ing the driver. No
+need to fill the log with messages from rtl8xxxu_int_complete()
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -5267,7 +5267,7 @@ static void rtl8xxxu_int_complete(struct
+ if (ret)
+ usb_unanchor_urb(urb);
+ } else {
+- dev_info(dev, "%s: Error %i\n", __func__, urb->status);
++ dev_dbg(dev, "%s: Error %i\n", __func__, urb->status);
+ }
+ }
+
--- /dev/null
+From be5bf7d23ac03bcfa2e6875248f7d45165589d4f Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Mon, 16 May 2016 21:57:25 -0400
+Subject: [PATCH] rtl8xxxu: Set all ieee80211_rx_status values in
+ parse_rx_desc()
+
+This needs to be handled locally in the parse_rx_desc() function in
+order to be able to handle aggregated packets in the future.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 17 ++++++++++++-----
+ 1 file changed, 12 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -5048,6 +5048,7 @@ static void rtl8xxxu_rx_urb_work(struct
+ int rtl8xxxu_parse_rxdesc16(struct rtl8xxxu_priv *priv, struct sk_buff *skb,
+ struct ieee80211_rx_status *rx_status)
+ {
++ struct ieee80211_hw *hw = priv->hw;
+ struct rtl8xxxu_rxdesc16 *rx_desc =
+ (struct rtl8xxxu_rxdesc16 *)skb->data;
+ struct rtl8723au_phy_stats *phy_stats;
+@@ -5059,6 +5060,8 @@ int rtl8xxxu_parse_rxdesc16(struct rtl8x
+ for (i = 0; i < (sizeof(struct rtl8xxxu_rxdesc16) / sizeof(u32)); i++)
+ _rx_desc[i] = le32_to_cpu(_rx_desc_le[i]);
+
++ memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
++
+ skb_pull(skb, sizeof(struct rtl8xxxu_rxdesc16));
+
+ phy_stats = (struct rtl8723au_phy_stats *)skb->data;
+@@ -5088,12 +5091,16 @@ int rtl8xxxu_parse_rxdesc16(struct rtl8x
+ rx_status->rate_idx = rx_desc->rxmcs;
+ }
+
++ rx_status->freq = hw->conf.chandef.chan->center_freq;
++ rx_status->band = hw->conf.chandef.chan->band;
++
+ return RX_TYPE_DATA_PKT;
+ }
+
+ int rtl8xxxu_parse_rxdesc24(struct rtl8xxxu_priv *priv, struct sk_buff *skb,
+ struct ieee80211_rx_status *rx_status)
+ {
++ struct ieee80211_hw *hw = priv->hw;
+ struct rtl8xxxu_rxdesc24 *rx_desc =
+ (struct rtl8xxxu_rxdesc24 *)skb->data;
+ struct rtl8723au_phy_stats *phy_stats;
+@@ -5105,6 +5112,8 @@ int rtl8xxxu_parse_rxdesc24(struct rtl8x
+ for (i = 0; i < (sizeof(struct rtl8xxxu_rxdesc24) / sizeof(u32)); i++)
+ _rx_desc[i] = le32_to_cpu(_rx_desc_le[i]);
+
++ memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
++
+ skb_pull(skb, sizeof(struct rtl8xxxu_rxdesc24));
+
+ phy_stats = (struct rtl8723au_phy_stats *)skb->data;
+@@ -5140,6 +5149,9 @@ int rtl8xxxu_parse_rxdesc24(struct rtl8x
+ rx_status->rate_idx = rx_desc->rxmcs;
+ }
+
++ rx_status->freq = hw->conf.chandef.chan->center_freq;
++ rx_status->band = hw->conf.chandef.chan->band;
++
+ return RX_TYPE_DATA_PKT;
+ }
+
+@@ -5202,13 +5214,8 @@ static void rtl8xxxu_rx_complete(struct
+ skb_put(skb, urb->actual_length);
+
+ if (urb->status == 0) {
+- memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
+-
+ rx_type = priv->fops->parse_rx_desc(priv, skb, rx_status);
+
+- rx_status->freq = hw->conf.chandef.chan->center_freq;
+- rx_status->band = hw->conf.chandef.chan->band;
+-
+ if (rx_type == RX_TYPE_DATA_PKT)
+ ieee80211_rx_irqsafe(hw, skb);
+ else {
--- /dev/null
+From 83bb21c65c73a5250504e6056e29683339fb15d2 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Mon, 16 May 2016 22:03:04 -0400
+Subject: [PATCH] rtl8xxxu: Move skb delivery into parse_tx_desc() handler
+
+This is another prepatory patch to be able to handle aggregated RX
+packets.
+
+In order to avoid adding a prototype, this also moves the
+rtl8723bu_handle_c2h() function.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 104 ++++++++++-----------
+ 1 file changed, 50 insertions(+), 54 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -5045,6 +5045,51 @@ static void rtl8xxxu_rx_urb_work(struct
+ }
+ }
+
++static void rtl8723bu_handle_c2h(struct rtl8xxxu_priv *priv,
++ struct sk_buff *skb)
++{
++ struct rtl8723bu_c2h *c2h = (struct rtl8723bu_c2h *)skb->data;
++ struct device *dev = &priv->udev->dev;
++ int len;
++
++ len = skb->len - 2;
++
++ dev_dbg(dev, "C2H ID %02x seq %02x, len %02x source %02x\n",
++ c2h->id, c2h->seq, len, c2h->bt_info.response_source);
++
++ switch(c2h->id) {
++ case C2H_8723B_BT_INFO:
++ if (c2h->bt_info.response_source >
++ BT_INFO_SRC_8723B_BT_ACTIVE_SEND)
++ dev_dbg(dev, "C2H_BT_INFO WiFi only firmware\n");
++ else
++ dev_dbg(dev, "C2H_BT_INFO BT/WiFi coexist firmware\n");
++
++ if (c2h->bt_info.bt_has_reset)
++ dev_dbg(dev, "BT has been reset\n");
++ if (c2h->bt_info.tx_rx_mask)
++ dev_dbg(dev, "BT TRx mask\n");
++
++ break;
++ case C2H_8723B_BT_MP_INFO:
++ dev_dbg(dev, "C2H_MP_INFO ext ID %02x, status %02x\n",
++ c2h->bt_mp_info.ext_id, c2h->bt_mp_info.status);
++ break;
++ case C2H_8723B_RA_REPORT:
++ dev_dbg(dev,
++ "C2H RA RPT: rate %02x, unk %i, macid %02x, noise %i\n",
++ c2h->ra_report.rate, c2h->ra_report.dummy0_0,
++ c2h->ra_report.macid, c2h->ra_report.noisy_state);
++ break;
++ default:
++ dev_info(dev, "Unhandled C2H event %02x seq %02x\n",
++ c2h->id, c2h->seq);
++ print_hex_dump(KERN_INFO, "C2H content: ", DUMP_PREFIX_NONE,
++ 16, 1, c2h->raw.payload, len, false);
++ break;
++ }
++}
++
+ int rtl8xxxu_parse_rxdesc16(struct rtl8xxxu_priv *priv, struct sk_buff *skb,
+ struct ieee80211_rx_status *rx_status)
+ {
+@@ -5094,6 +5139,7 @@ int rtl8xxxu_parse_rxdesc16(struct rtl8x
+ rx_status->freq = hw->conf.chandef.chan->center_freq;
+ rx_status->band = hw->conf.chandef.chan->band;
+
++ ieee80211_rx_irqsafe(hw, skb);
+ return RX_TYPE_DATA_PKT;
+ }
+
+@@ -5125,6 +5171,8 @@ int rtl8xxxu_parse_rxdesc24(struct rtl8x
+ if (rx_desc->rpt_sel) {
+ struct device *dev = &priv->udev->dev;
+ dev_dbg(dev, "%s: C2H packet\n", __func__);
++ rtl8723bu_handle_c2h(priv, skb);
++ dev_kfree_skb(skb);
+ return RX_TYPE_C2H;
+ }
+
+@@ -5152,54 +5200,10 @@ int rtl8xxxu_parse_rxdesc24(struct rtl8x
+ rx_status->freq = hw->conf.chandef.chan->center_freq;
+ rx_status->band = hw->conf.chandef.chan->band;
+
++ ieee80211_rx_irqsafe(hw, skb);
+ return RX_TYPE_DATA_PKT;
+ }
+
+-static void rtl8723bu_handle_c2h(struct rtl8xxxu_priv *priv,
+- struct sk_buff *skb)
+-{
+- struct rtl8723bu_c2h *c2h = (struct rtl8723bu_c2h *)skb->data;
+- struct device *dev = &priv->udev->dev;
+- int len;
+-
+- len = skb->len - 2;
+-
+- dev_dbg(dev, "C2H ID %02x seq %02x, len %02x source %02x\n",
+- c2h->id, c2h->seq, len, c2h->bt_info.response_source);
+-
+- switch(c2h->id) {
+- case C2H_8723B_BT_INFO:
+- if (c2h->bt_info.response_source >
+- BT_INFO_SRC_8723B_BT_ACTIVE_SEND)
+- dev_dbg(dev, "C2H_BT_INFO WiFi only firmware\n");
+- else
+- dev_dbg(dev, "C2H_BT_INFO BT/WiFi coexist firmware\n");
+-
+- if (c2h->bt_info.bt_has_reset)
+- dev_dbg(dev, "BT has been reset\n");
+- if (c2h->bt_info.tx_rx_mask)
+- dev_dbg(dev, "BT TRx mask\n");
+-
+- break;
+- case C2H_8723B_BT_MP_INFO:
+- dev_dbg(dev, "C2H_MP_INFO ext ID %02x, status %02x\n",
+- c2h->bt_mp_info.ext_id, c2h->bt_mp_info.status);
+- break;
+- case C2H_8723B_RA_REPORT:
+- dev_dbg(dev,
+- "C2H RA RPT: rate %02x, unk %i, macid %02x, noise %i\n",
+- c2h->ra_report.rate, c2h->ra_report.dummy0_0,
+- c2h->ra_report.macid, c2h->ra_report.noisy_state);
+- break;
+- default:
+- dev_info(dev, "Unhandled C2H event %02x seq %02x\n",
+- c2h->id, c2h->seq);
+- print_hex_dump(KERN_INFO, "C2H content: ", DUMP_PREFIX_NONE,
+- 16, 1, c2h->raw.payload, len, false);
+- break;
+- }
+-}
+-
+ static void rtl8xxxu_rx_complete(struct urb *urb)
+ {
+ struct rtl8xxxu_rx_urb *rx_urb =
+@@ -5209,19 +5213,11 @@ static void rtl8xxxu_rx_complete(struct
+ struct sk_buff *skb = (struct sk_buff *)urb->context;
+ struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(skb);
+ struct device *dev = &priv->udev->dev;
+- int rx_type;
+
+ skb_put(skb, urb->actual_length);
+
+ if (urb->status == 0) {
+- rx_type = priv->fops->parse_rx_desc(priv, skb, rx_status);
+-
+- if (rx_type == RX_TYPE_DATA_PKT)
+- ieee80211_rx_irqsafe(hw, skb);
+- else {
+- rtl8723bu_handle_c2h(priv, skb);
+- dev_kfree_skb(skb);
+- }
++ priv->fops->parse_rx_desc(priv, skb, rx_status);
+
+ skb = NULL;
+ rx_urb->urb.context = NULL;
--- /dev/null
+From d6e54e5f7c011c2396c4cec56ca8e8e5cf1c89da Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Mon, 16 May 2016 22:13:22 -0400
+Subject: [PATCH] rtl8xxxu: Obtain ieee80211_rx_status within parse_rx_desc()
+
+When handling aggregated packets, we'll get a new ieee80211_rx_status
+for each cloned skb, so passing in the pointer from the outside
+doesn't make sense.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 9 +++------
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 11 +++++------
+ 2 files changed, 8 insertions(+), 12 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+@@ -1315,8 +1315,7 @@ struct rtl8xxxu_fileops {
+ void (*phy_init_antenna_selection) (struct rtl8xxxu_priv *priv);
+ void (*phy_iq_calibrate) (struct rtl8xxxu_priv *priv);
+ void (*config_channel) (struct ieee80211_hw *hw);
+- int (*parse_rx_desc) (struct rtl8xxxu_priv *priv, struct sk_buff *skb,
+- struct ieee80211_rx_status *rx_status);
++ int (*parse_rx_desc) (struct rtl8xxxu_priv *priv, struct sk_buff *skb);
+ void (*init_aggregation) (struct rtl8xxxu_priv *priv);
+ void (*init_statistics) (struct rtl8xxxu_priv *priv);
+ void (*enable_rf) (struct rtl8xxxu_priv *priv);
+@@ -1412,10 +1411,8 @@ void rtl8xxxu_gen2_report_connect(struct
+ void rtl8xxxu_gen1_enable_rf(struct rtl8xxxu_priv *priv);
+ void rtl8xxxu_gen1_disable_rf(struct rtl8xxxu_priv *priv);
+ void rtl8xxxu_gen2_disable_rf(struct rtl8xxxu_priv *priv);
+-int rtl8xxxu_parse_rxdesc16(struct rtl8xxxu_priv *priv, struct sk_buff *skb,
+- struct ieee80211_rx_status *rx_status);
+-int rtl8xxxu_parse_rxdesc24(struct rtl8xxxu_priv *priv, struct sk_buff *skb,
+- struct ieee80211_rx_status *rx_status);
++int rtl8xxxu_parse_rxdesc16(struct rtl8xxxu_priv *priv, struct sk_buff *skb);
++int rtl8xxxu_parse_rxdesc24(struct rtl8xxxu_priv *priv, struct sk_buff *skb);
+ int rtl8xxxu_gen2_channel_to_group(int channel);
+ bool rtl8xxxu_gen2_simularity_compare(struct rtl8xxxu_priv *priv,
+ int result[][8], int c1, int c2);
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -5090,10 +5090,10 @@ static void rtl8723bu_handle_c2h(struct
+ }
+ }
+
+-int rtl8xxxu_parse_rxdesc16(struct rtl8xxxu_priv *priv, struct sk_buff *skb,
+- struct ieee80211_rx_status *rx_status)
++int rtl8xxxu_parse_rxdesc16(struct rtl8xxxu_priv *priv, struct sk_buff *skb)
+ {
+ struct ieee80211_hw *hw = priv->hw;
++ struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(skb);
+ struct rtl8xxxu_rxdesc16 *rx_desc =
+ (struct rtl8xxxu_rxdesc16 *)skb->data;
+ struct rtl8723au_phy_stats *phy_stats;
+@@ -5143,10 +5143,10 @@ int rtl8xxxu_parse_rxdesc16(struct rtl8x
+ return RX_TYPE_DATA_PKT;
+ }
+
+-int rtl8xxxu_parse_rxdesc24(struct rtl8xxxu_priv *priv, struct sk_buff *skb,
+- struct ieee80211_rx_status *rx_status)
++int rtl8xxxu_parse_rxdesc24(struct rtl8xxxu_priv *priv, struct sk_buff *skb)
+ {
+ struct ieee80211_hw *hw = priv->hw;
++ struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(skb);
+ struct rtl8xxxu_rxdesc24 *rx_desc =
+ (struct rtl8xxxu_rxdesc24 *)skb->data;
+ struct rtl8723au_phy_stats *phy_stats;
+@@ -5211,13 +5211,12 @@ static void rtl8xxxu_rx_complete(struct
+ struct ieee80211_hw *hw = rx_urb->hw;
+ struct rtl8xxxu_priv *priv = hw->priv;
+ struct sk_buff *skb = (struct sk_buff *)urb->context;
+- struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(skb);
+ struct device *dev = &priv->udev->dev;
+
+ skb_put(skb, urb->actual_length);
+
+ if (urb->status == 0) {
+- priv->fops->parse_rx_desc(priv, skb, rx_status);
++ priv->fops->parse_rx_desc(priv, skb);
+
+ skb = NULL;
+ rx_urb->urb.context = NULL;
--- /dev/null
+From 5af9037975b20c64faa6e4829971b9a039342352 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Thu, 19 May 2016 20:29:01 -0400
+Subject: [PATCH] rtl8xxxu: Correct rxdesc16 definition
+
+This corrects the definition of rxdesc16 to correctly specify pkt_cnt
+for aggregated packets. This is based on the code of the vendor
+rtl8723au driver, as opposed to the struct definitions they use.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 6 ++++--
+ 1 file changed, 4 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+@@ -135,7 +135,8 @@ struct rtl8xxxu_rxdesc16 {
+
+ u32 seq:12;
+ u32 frag:4;
+- u32 nextpktlen:14;
++ u32 pkt_cnt:8;
++ u32 reserved:6;
+ u32 nextind:1;
+ u32 reserved0:1;
+
+@@ -198,7 +199,8 @@ struct rtl8xxxu_rxdesc16 {
+
+ u32 reserved0:1;
+ u32 nextind:1;
+- u32 nextpktlen:14;
++ u32 reserved:6;
++ u32 pkt_cnt:8;
+ u32 frag:4;
+ u32 seq:12;
+
--- /dev/null
+From 6cee81e9411abb9fc538308b06e75b4f2cdbde1c Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Fri, 20 May 2016 00:15:47 -0400
+Subject: [PATCH] rtl8xxxu: Add support for aggregated RX packets on gen1 parts
+
+This implements support for demuxing aggregated RX packets on gen1
+devices, using the rxdesc16 format.
+
+So far this has only been tested with rtl8723au devices.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 103 ++++++++++++++-------
+ 1 file changed, 69 insertions(+), 34 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -5093,53 +5093,88 @@ static void rtl8723bu_handle_c2h(struct
+ int rtl8xxxu_parse_rxdesc16(struct rtl8xxxu_priv *priv, struct sk_buff *skb)
+ {
+ struct ieee80211_hw *hw = priv->hw;
+- struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(skb);
+- struct rtl8xxxu_rxdesc16 *rx_desc =
+- (struct rtl8xxxu_rxdesc16 *)skb->data;
++ struct ieee80211_rx_status *rx_status;
++ struct rtl8xxxu_rxdesc16 *rx_desc;
+ struct rtl8723au_phy_stats *phy_stats;
+- __le32 *_rx_desc_le = (__le32 *)skb->data;
+- u32 *_rx_desc = (u32 *)skb->data;
++ struct sk_buff *next_skb = NULL;
++ __le32 *_rx_desc_le;
++ u32 *_rx_desc;
+ int drvinfo_sz, desc_shift;
+- int i;
++ int i, pkt_cnt, pkt_len, urb_len, pkt_offset;
+
+- for (i = 0; i < (sizeof(struct rtl8xxxu_rxdesc16) / sizeof(u32)); i++)
+- _rx_desc[i] = le32_to_cpu(_rx_desc_le[i]);
++ urb_len = skb->len;
++ pkt_cnt = 0;
+
+- memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
++ do {
++ rx_desc = (struct rtl8xxxu_rxdesc16 *)skb->data;
++ _rx_desc_le = (__le32 *)skb->data;
++ _rx_desc = (u32 *)skb->data;
+
+- skb_pull(skb, sizeof(struct rtl8xxxu_rxdesc16));
++ for (i = 0;
++ i < (sizeof(struct rtl8xxxu_rxdesc16) / sizeof(u32)); i++)
++ _rx_desc[i] = le32_to_cpu(_rx_desc_le[i]);
+
+- phy_stats = (struct rtl8723au_phy_stats *)skb->data;
++ /*
++ * Only read pkt_cnt from the header if we're parsing the
++ * first packet
++ */
++ if (!pkt_cnt)
++ pkt_cnt = rx_desc->pkt_cnt;
++ pkt_len = rx_desc->pktlen;
+
+- drvinfo_sz = rx_desc->drvinfo_sz * 8;
+- desc_shift = rx_desc->shift;
+- skb_pull(skb, drvinfo_sz + desc_shift);
++ drvinfo_sz = rx_desc->drvinfo_sz * 8;
++ desc_shift = rx_desc->shift;
++ pkt_offset = roundup(pkt_len + drvinfo_sz + desc_shift +
++ sizeof(struct rtl8xxxu_rxdesc16), 128);
+
+- if (rx_desc->phy_stats)
+- rtl8xxxu_rx_parse_phystats(priv, rx_status, phy_stats,
+- rx_desc->rxmcs);
++ if (pkt_cnt > 1)
++ next_skb = skb_clone(skb, GFP_ATOMIC);
+
+- rx_status->mactime = le32_to_cpu(rx_desc->tsfl);
+- rx_status->flag |= RX_FLAG_MACTIME_START;
++ rx_status = IEEE80211_SKB_RXCB(skb);
++ memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
+
+- if (!rx_desc->swdec)
+- rx_status->flag |= RX_FLAG_DECRYPTED;
+- if (rx_desc->crc32)
+- rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;
+- if (rx_desc->bw)
+- rx_status->flag |= RX_FLAG_40MHZ;
++ skb_pull(skb, sizeof(struct rtl8xxxu_rxdesc16));
+
+- if (rx_desc->rxht) {
+- rx_status->flag |= RX_FLAG_HT;
+- rx_status->rate_idx = rx_desc->rxmcs - DESC_RATE_MCS0;
+- } else {
+- rx_status->rate_idx = rx_desc->rxmcs;
+- }
++ phy_stats = (struct rtl8723au_phy_stats *)skb->data;
+
+- rx_status->freq = hw->conf.chandef.chan->center_freq;
+- rx_status->band = hw->conf.chandef.chan->band;
++ skb_pull(skb, drvinfo_sz + desc_shift);
++
++ skb_trim(skb, pkt_len);
++
++ if (rx_desc->phy_stats)
++ rtl8xxxu_rx_parse_phystats(priv, rx_status, phy_stats,
++ rx_desc->rxmcs);
++
++ rx_status->mactime = le32_to_cpu(rx_desc->tsfl);
++ rx_status->flag |= RX_FLAG_MACTIME_START;
++
++ if (!rx_desc->swdec)
++ rx_status->flag |= RX_FLAG_DECRYPTED;
++ if (rx_desc->crc32)
++ rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;
++ if (rx_desc->bw)
++ rx_status->flag |= RX_FLAG_40MHZ;
++
++ if (rx_desc->rxht) {
++ rx_status->flag |= RX_FLAG_HT;
++ rx_status->rate_idx = rx_desc->rxmcs - DESC_RATE_MCS0;
++ } else {
++ rx_status->rate_idx = rx_desc->rxmcs;
++ }
++
++ rx_status->freq = hw->conf.chandef.chan->center_freq;
++ rx_status->band = hw->conf.chandef.chan->band;
++
++ ieee80211_rx_irqsafe(hw, skb);
++
++ skb = next_skb;
++ if (skb)
++ skb_pull(next_skb, pkt_offset);
++
++ pkt_cnt--;
++ urb_len -= pkt_offset;
++ } while (skb && urb_len > 0 && pkt_cnt > 0);
+
+- ieee80211_rx_irqsafe(hw, skb);
+ return RX_TYPE_DATA_PKT;
+ }
+
--- /dev/null
+From 48c31d0cdbadc082abfcf88c2bd161fab4000bb4 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Sat, 21 May 2016 13:43:51 -0400
+Subject: [PATCH] rtl8xxxu: Allocate larger RX skbs when aggregation is enabled
+
+This adds support for allocating larger skbs for devices which
+indicate they support it.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 2 ++
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 13 +++++++++----
+ 2 files changed, 11 insertions(+), 4 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+@@ -1247,6 +1247,7 @@ struct rtl8xxxu_priv {
+ u32 ep_tx_normal_queue:1;
+ u32 ep_tx_low_queue:1;
+ u32 has_xtalk:1;
++ u32 rx_buf_aggregation:1;
+ u8 xtalk;
+ unsigned int pipe_interrupt;
+ unsigned int pipe_in;
+@@ -1330,6 +1331,7 @@ struct rtl8xxxu_fileops {
+ void (*report_connect) (struct rtl8xxxu_priv *priv,
+ u8 macid, bool connect);
+ int writeN_block_size;
++ int rx_agg_buf_size;
+ char tx_desc_size;
+ char rx_desc_size;
+ char has_s0s1;
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -64,8 +64,6 @@ module_param_named(ht40_2g, rtl8xxxu_ht4
+ MODULE_PARM_DESC(ht40_2g, "Enable HT40 support on the 2.4GHz band");
+
+ #define USB_VENDOR_ID_REALTEK 0x0bda
+-/* Minimum IEEE80211_MAX_FRAME_LEN */
+-#define RTL_RX_BUFFER_SIZE IEEE80211_MAX_FRAME_LEN
+ #define RTL8XXXU_RX_URBS 32
+ #define RTL8XXXU_RX_URB_PENDING_WATER 8
+ #define RTL8XXXU_TX_URBS 64
+@@ -5271,12 +5269,19 @@ cleanup:
+ static int rtl8xxxu_submit_rx_urb(struct rtl8xxxu_priv *priv,
+ struct rtl8xxxu_rx_urb *rx_urb)
+ {
++ struct rtl8xxxu_fileops *fops = priv->fops;
+ struct sk_buff *skb;
+ int skb_size;
+ int ret, rx_desc_sz;
+
+- rx_desc_sz = priv->fops->rx_desc_size;
+- skb_size = rx_desc_sz + RTL_RX_BUFFER_SIZE;
++ rx_desc_sz = fops->rx_desc_size;
++
++ if (priv->rx_buf_aggregation && fops->rx_agg_buf_size)
++ skb_size = fops->rx_agg_buf_size;
++ else
++ skb_size = IEEE80211_MAX_FRAME_LEN;
++ skb_size += rx_desc_sz;
++
+ skb = __netdev_alloc_skb(NULL, skb_size, GFP_KERNEL);
+ if (!skb)
+ return -ENOMEM;
--- /dev/null
+From e9f4ede33cf1cd0bc705de6cd9c150fb3677ed74 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Sat, 21 May 2016 13:45:37 -0400
+Subject: [PATCH] rtl8xxxu: Adjust RX skb size to include space for phystats
+
+The old allocation didn't leave space for phystats in the buffer,
+allowing the packet to be rejected if a frame size of size
+IEEE80211_MAX_FRAME_LEN was received.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 7 ++++---
+ 1 file changed, 4 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -5276,11 +5276,12 @@ static int rtl8xxxu_submit_rx_urb(struct
+
+ rx_desc_sz = fops->rx_desc_size;
+
+- if (priv->rx_buf_aggregation && fops->rx_agg_buf_size)
++ if (priv->rx_buf_aggregation && fops->rx_agg_buf_size) {
+ skb_size = fops->rx_agg_buf_size;
+- else
++ skb_size += (rx_desc_sz + sizeof(struct rtl8723au_phy_stats));
++ } else {
+ skb_size = IEEE80211_MAX_FRAME_LEN;
+- skb_size += rx_desc_sz;
++ }
+
+ skb = __netdev_alloc_skb(NULL, skb_size, GFP_KERNEL);
+ if (!skb)
--- /dev/null
+From 7e9f37893c874ff2a01dfbf73d31d3de37359fc7 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Mon, 16 May 2016 21:50:57 -0400
+Subject: [PATCH] rtl8xxxu: Enable aggregation for rtl8723au
+
+Implement rtl8xxxu_gen1_init_aggregation(). Aggregation should be the
+same for all gen1 parts. We may want to allow for tuning parameters in
+the fileopes struct. For now this is based allocating 16KB RX buffers,
+leaving 16000 bytes for actual packets, and the rest for the skb
+overhead.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 1 +
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c | 2 ++
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 34 ++++++++++++++++++++++
+ 3 files changed, 37 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+@@ -1412,6 +1412,7 @@ void rtl8xxxu_gen1_report_connect(struct
+ u8 macid, bool connect);
+ void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv,
+ u8 macid, bool connect);
++void rtl8xxxu_gen1_init_aggregation(struct rtl8xxxu_priv *priv);
+ void rtl8xxxu_gen1_enable_rf(struct rtl8xxxu_priv *priv);
+ void rtl8xxxu_gen1_disable_rf(struct rtl8xxxu_priv *priv);
+ void rtl8xxxu_gen2_disable_rf(struct rtl8xxxu_priv *priv);
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c
+@@ -377,6 +377,7 @@ struct rtl8xxxu_fileops rtl8723au_fops =
+ .phy_iq_calibrate = rtl8xxxu_gen1_phy_iq_calibrate,
+ .config_channel = rtl8xxxu_gen1_config_channel,
+ .parse_rx_desc = rtl8xxxu_parse_rxdesc16,
++ .init_aggregation = rtl8xxxu_gen1_init_aggregation,
+ .enable_rf = rtl8xxxu_gen1_enable_rf,
+ .disable_rf = rtl8xxxu_gen1_disable_rf,
+ .usb_quirks = rtl8xxxu_gen1_usb_quirks,
+@@ -384,6 +385,7 @@ struct rtl8xxxu_fileops rtl8723au_fops =
+ .update_rate_mask = rtl8xxxu_update_rate_mask,
+ .report_connect = rtl8xxxu_gen1_report_connect,
+ .writeN_block_size = 1024,
++ .rx_agg_buf_size = 16000,
+ .tx_desc_size = sizeof(struct rtl8xxxu_txdesc32),
+ .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16),
+ .adda_1t_init = 0x0b1b25a0,
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -4405,6 +4405,40 @@ void rtl8xxxu_gen2_report_connect(struct
+ rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.media_status_rpt));
+ }
+
++void rtl8xxxu_gen1_init_aggregation(struct rtl8xxxu_priv *priv)
++{
++ u8 agg_ctrl, usb_spec, page_thresh;
++
++ usb_spec = rtl8xxxu_read8(priv, REG_USB_SPECIAL_OPTION);
++ usb_spec &= ~USB_SPEC_USB_AGG_ENABLE;
++
++ agg_ctrl = rtl8xxxu_read8(priv, REG_TRXDMA_CTRL);
++ agg_ctrl &= ~TRXDMA_CTRL_RXDMA_AGG_EN;
++
++ agg_ctrl |= TRXDMA_CTRL_RXDMA_AGG_EN;
++
++ rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl);
++ rtl8xxxu_write8(priv, REG_USB_SPECIAL_OPTION, usb_spec);
++
++ /*
++ * The number of packets we can take looks to be buffer size / 512
++ * which matches the 512 byte rounding we have to do when de-muxing
++ * the packets.
++ *
++ * Sample numbers from the vendor driver:
++ * USB High-Speed mode values:
++ * RxAggBlockCount = 8 : 512 byte unit
++ * RxAggBlockTimeout = 6
++ * RxAggPageCount = 48 : 128 byte unit
++ * RxAggPageTimeout = 4 or 6 (absolute time 34ms/(2^6))
++ */
++
++ page_thresh = (priv->fops->rx_agg_buf_size / 512);
++ rtl8xxxu_write8(priv, REG_RXDMA_AGG_PG_TH, page_thresh);
++ rtl8xxxu_write8(priv, REG_USB_DMA_AGG_TO, 4);
++ priv->rx_buf_aggregation = 1;
++}
++
+ static void rtl8xxxu_set_basic_rates(struct rtl8xxxu_priv *priv, u32 rate_cfg)
+ {
+ u32 val32;
--- /dev/null
+From 02d7c11e9b66e38806b73dcb5de319bb64710367 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Sun, 22 May 2016 13:45:30 -0400
+Subject: [PATCH] rtl8xxxu: Enable aggregation for
+ rtl8192cu/rtl8188cu/rtl8188ru
+
+This enables aggregation on rtl8192cu and derivative parts. This uses
+the same parameters as for rtl8723au.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
+@@ -560,6 +560,7 @@ struct rtl8xxxu_fileops rtl8192cu_fops =
+ .phy_iq_calibrate = rtl8xxxu_gen1_phy_iq_calibrate,
+ .config_channel = rtl8xxxu_gen1_config_channel,
+ .parse_rx_desc = rtl8xxxu_parse_rxdesc16,
++ .init_aggregation = rtl8xxxu_gen1_init_aggregation,
+ .enable_rf = rtl8xxxu_gen1_enable_rf,
+ .disable_rf = rtl8xxxu_gen1_disable_rf,
+ .usb_quirks = rtl8xxxu_gen1_usb_quirks,
+@@ -567,6 +568,7 @@ struct rtl8xxxu_fileops rtl8192cu_fops =
+ .update_rate_mask = rtl8xxxu_update_rate_mask,
+ .report_connect = rtl8xxxu_gen1_report_connect,
+ .writeN_block_size = 128,
++ .rx_agg_buf_size = 16000,
+ .tx_desc_size = sizeof(struct rtl8xxxu_txdesc32),
+ .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16),
+ .adda_1t_init = 0x0b1b25a0,
--- /dev/null
+From 0640e5cd53bc004be1a9a1af6d340baab44d9351 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Thu, 16 Jun 2016 14:46:05 -0400
+Subject: [PATCH] rtl8xxxu: Make DMA aggregation optional by setting a module
+ parameter
+
+Let the default to off until we have more data on the right default
+tuning values.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 11 +++++++++--
+ 1 file changed, 9 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -44,6 +44,7 @@
+
+ int rtl8xxxu_debug = RTL8XXXU_DEBUG_EFUSE;
+ static bool rtl8xxxu_ht40_2g;
++static bool rtl8xxxu_dma_aggregation;
+
+ MODULE_AUTHOR("Jes Sorensen <Jes.Sorensen@redhat.com>");
+ MODULE_DESCRIPTION("RTL8XXXu USB mac80211 Wireless LAN Driver");
+@@ -62,6 +63,8 @@ module_param_named(debug, rtl8xxxu_debug
+ MODULE_PARM_DESC(debug, "Set debug mask");
+ module_param_named(ht40_2g, rtl8xxxu_ht40_2g, bool, 0600);
+ MODULE_PARM_DESC(ht40_2g, "Enable HT40 support on the 2.4GHz band");
++module_param_named(dma_aggregation, rtl8xxxu_dma_aggregation, bool, 0600);
++MODULE_PARM_DESC(dma_aggregation, "Enable DMA packet aggregation");
+
+ #define USB_VENDOR_ID_REALTEK 0x0bda
+ #define RTL8XXXU_RX_URBS 32
+@@ -4411,14 +4414,18 @@ void rtl8xxxu_gen1_init_aggregation(stru
+
+ usb_spec = rtl8xxxu_read8(priv, REG_USB_SPECIAL_OPTION);
+ usb_spec &= ~USB_SPEC_USB_AGG_ENABLE;
++ rtl8xxxu_write8(priv, REG_USB_SPECIAL_OPTION, usb_spec);
+
+ agg_ctrl = rtl8xxxu_read8(priv, REG_TRXDMA_CTRL);
+ agg_ctrl &= ~TRXDMA_CTRL_RXDMA_AGG_EN;
+
+- agg_ctrl |= TRXDMA_CTRL_RXDMA_AGG_EN;
++ if (!rtl8xxxu_dma_aggregation) {
++ rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl);
++ return;
++ }
+
++ agg_ctrl |= TRXDMA_CTRL_RXDMA_AGG_EN;
+ rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl);
+- rtl8xxxu_write8(priv, REG_USB_SPECIAL_OPTION, usb_spec);
+
+ /*
+ * The number of packets we can take looks to be buffer size / 512
--- /dev/null
+From 0338642c5eeaaf03cd4a63e211b94596c559e6e5 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 22 Jun 2016 22:09:35 -0400
+Subject: [PATCH] rtl8xxxu: gen1: Set aggregation timeout (REG_RXDMA_AGG_PG_TH
+ + 1) as well
+
+gen2 chips as well as 8188eu seems to use this register for setting
+DMA timeout threshold values, however the 8192cu is using
+REG_USB_DMA_AGG_TO. Set both to be on the safe side.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 11 +++++++++--
+ 1 file changed, 9 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -4410,7 +4410,7 @@ void rtl8xxxu_gen2_report_connect(struct
+
+ void rtl8xxxu_gen1_init_aggregation(struct rtl8xxxu_priv *priv)
+ {
+- u8 agg_ctrl, usb_spec, page_thresh;
++ u8 agg_ctrl, usb_spec, page_thresh, timeout;
+
+ usb_spec = rtl8xxxu_read8(priv, REG_USB_SPECIAL_OPTION);
+ usb_spec &= ~USB_SPEC_USB_AGG_ENABLE;
+@@ -4442,7 +4442,14 @@ void rtl8xxxu_gen1_init_aggregation(stru
+
+ page_thresh = (priv->fops->rx_agg_buf_size / 512);
+ rtl8xxxu_write8(priv, REG_RXDMA_AGG_PG_TH, page_thresh);
+- rtl8xxxu_write8(priv, REG_USB_DMA_AGG_TO, 4);
++ /*
++ * REG_RXDMA_AGG_PG_TH + 1 seems to be the timeout register on
++ * gen2 chips and rtl8188eu. The rtl8723au seems unhappy if we
++ * don't set it, so better set both.
++ */
++ timeout = 4;
++ rtl8xxxu_write8(priv, REG_RXDMA_AGG_PG_TH + 1, timeout);
++ rtl8xxxu_write8(priv, REG_USB_DMA_AGG_TO, timeout);
+ priv->rx_buf_aggregation = 1;
+ }
+
--- /dev/null
+From 3dc0c72274876ad9612b12ab9fce553ec7e21d20 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 22 Jun 2016 23:17:37 -0400
+Subject: [PATCH] rtl8xxxu: gen1: Add module parameters to adjust DMA
+ aggregation parameters
+
+This allows the user to specify DMA aggregation timout and block
+count. Blocks are presumably always 512 bytes, so the minimum block
+count is 6 for 802.11 packets.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 28 ++++++++++++++++++++++
+ 1 file changed, 28 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -45,6 +45,8 @@
+ int rtl8xxxu_debug = RTL8XXXU_DEBUG_EFUSE;
+ static bool rtl8xxxu_ht40_2g;
+ static bool rtl8xxxu_dma_aggregation;
++static int rtl8xxxu_dma_agg_timeout = -1;
++static int rtl8xxxu_dma_agg_pages = -1;
+
+ MODULE_AUTHOR("Jes Sorensen <Jes.Sorensen@redhat.com>");
+ MODULE_DESCRIPTION("RTL8XXXu USB mac80211 Wireless LAN Driver");
+@@ -65,6 +67,10 @@ module_param_named(ht40_2g, rtl8xxxu_ht4
+ MODULE_PARM_DESC(ht40_2g, "Enable HT40 support on the 2.4GHz band");
+ module_param_named(dma_aggregation, rtl8xxxu_dma_aggregation, bool, 0600);
+ MODULE_PARM_DESC(dma_aggregation, "Enable DMA packet aggregation");
++module_param_named(dma_agg_timeout, rtl8xxxu_dma_agg_timeout, int, 0600);
++MODULE_PARM_DESC(dma_agg_timeout, "Set DMA aggregation timeout (range 1-127)");
++module_param_named(dma_agg_pages, rtl8xxxu_dma_agg_pages, int, 0600);
++MODULE_PARM_DESC(dma_agg_pages, "Set DMA aggregation pages (range 1-127, 0 to disable)");
+
+ #define USB_VENDOR_ID_REALTEK 0x0bda
+ #define RTL8XXXU_RX_URBS 32
+@@ -4441,6 +4447,18 @@ void rtl8xxxu_gen1_init_aggregation(stru
+ */
+
+ page_thresh = (priv->fops->rx_agg_buf_size / 512);
++ if (rtl8xxxu_dma_agg_pages >= 0) {
++ if (rtl8xxxu_dma_agg_pages <= page_thresh)
++ timeout = page_thresh;
++ else if (rtl8xxxu_dma_agg_pages <= 6)
++ dev_err(&priv->udev->dev,
++ "%s: dma_agg_pages=%i too small, minium is 6\n",
++ __func__, rtl8xxxu_dma_agg_pages);
++ else
++ dev_err(&priv->udev->dev,
++ "%s: dma_agg_pages=%i larger than limit %i\n",
++ __func__, rtl8xxxu_dma_agg_pages, page_thresh);
++ }
+ rtl8xxxu_write8(priv, REG_RXDMA_AGG_PG_TH, page_thresh);
+ /*
+ * REG_RXDMA_AGG_PG_TH + 1 seems to be the timeout register on
+@@ -4448,6 +4466,16 @@ void rtl8xxxu_gen1_init_aggregation(stru
+ * don't set it, so better set both.
+ */
+ timeout = 4;
++
++ if (rtl8xxxu_dma_agg_timeout >= 0) {
++ if (rtl8xxxu_dma_agg_timeout <= 127)
++ timeout = rtl8xxxu_dma_agg_timeout;
++ else
++ dev_err(&priv->udev->dev,
++ "%s: Invalid dma_agg_timeout: %i\n",
++ __func__, rtl8xxxu_dma_agg_timeout);
++ }
++
+ rtl8xxxu_write8(priv, REG_RXDMA_AGG_PG_TH + 1, timeout);
+ rtl8xxxu_write8(priv, REG_USB_DMA_AGG_TO, timeout);
+ priv->rx_buf_aggregation = 1;
--- /dev/null
+From cd0355d9889f6843a0fac0a160cfb42b482cbcf7 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Thu, 23 Jun 2016 12:47:17 -0400
+Subject: [PATCH] rtl8xxxu: Mark 0x20f4:0x648b as tested
+
+Successfully tested by Jocelyn Mayer
+
+Reported-by: J. Mayer <l_indien@magic.fr>
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 9 +++++++--
+ 1 file changed, 7 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -5971,6 +5971,10 @@ static int rtl8xxxu_probe(struct usb_int
+ if (id->idProduct == 0x1004)
+ untested = 0;
+ break;
++ case 0x20f4:
++ if (id->idProduct == 0x648b)
++ untested = 0;
++ break;
+ default:
+ break;
+ }
+@@ -6140,6 +6144,9 @@ static struct usb_device_id dev_table[]
+ /* Tested by Andrea Merello */
+ {USB_DEVICE_AND_INTERFACE_INFO(0x050d, 0x1004, 0xff, 0xff, 0xff),
+ .driver_info = (unsigned long)&rtl8192cu_fops},
++/* Tested by Jocelyn Mayer */
++{USB_DEVICE_AND_INTERFACE_INFO(0x20f4, 0x648b, 0xff, 0xff, 0xff),
++ .driver_info = (unsigned long)&rtl8192cu_fops},
+ /* Currently untested 8188 series devices */
+ {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8191, 0xff, 0xff, 0xff),
+ .driver_info = (unsigned long)&rtl8192cu_fops},
+@@ -6199,8 +6206,6 @@ static struct usb_device_id dev_table[]
+ .driver_info = (unsigned long)&rtl8192cu_fops},
+ {USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xed17, 0xff, 0xff, 0xff),
+ .driver_info = (unsigned long)&rtl8192cu_fops},
+-{USB_DEVICE_AND_INTERFACE_INFO(0x20f4, 0x648b, 0xff, 0xff, 0xff),
+- .driver_info = (unsigned long)&rtl8192cu_fops},
+ {USB_DEVICE_AND_INTERFACE_INFO(0x4855, 0x0090, 0xff, 0xff, 0xff),
+ .driver_info = (unsigned long)&rtl8192cu_fops},
+ {USB_DEVICE_AND_INTERFACE_INFO(0x4856, 0x0091, 0xff, 0xff, 0xff),
--- /dev/null
+From 7aff76bb819f3d7936c88fdf519619efab64e6c2 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Thu, 23 Jun 2016 12:56:20 -0400
+Subject: [PATCH] rtl8xxxu: Mark 0x2001:0x3308 as tested
+
+D-Link DWA-121 is reported as working.
+
+Reported-by: Stefano Bravi <stefanobravi69@libero.it>
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 9 +++++++--
+ 1 file changed, 7 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -5975,6 +5975,10 @@ static int rtl8xxxu_probe(struct usb_int
+ if (id->idProduct == 0x648b)
+ untested = 0;
+ break;
++ case 0x2001:
++ if (id->idProduct == 0x3308)
++ untested = 0;
++ break;
+ default:
+ break;
+ }
+@@ -6147,6 +6151,9 @@ static struct usb_device_id dev_table[]
+ /* Tested by Jocelyn Mayer */
+ {USB_DEVICE_AND_INTERFACE_INFO(0x20f4, 0x648b, 0xff, 0xff, 0xff),
+ .driver_info = (unsigned long)&rtl8192cu_fops},
++/* Tested by Stefano Bravi */
++{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3308, 0xff, 0xff, 0xff),
++ .driver_info = (unsigned long)&rtl8192cu_fops},
+ /* Currently untested 8188 series devices */
+ {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8191, 0xff, 0xff, 0xff),
+ .driver_info = (unsigned long)&rtl8192cu_fops},
+@@ -6194,8 +6201,6 @@ static struct usb_device_id dev_table[]
+ .driver_info = (unsigned long)&rtl8192cu_fops},
+ {USB_DEVICE_AND_INTERFACE_INFO(0x13d3, 0x3357, 0xff, 0xff, 0xff),
+ .driver_info = (unsigned long)&rtl8192cu_fops},
+-{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3308, 0xff, 0xff, 0xff),
+- .driver_info = (unsigned long)&rtl8192cu_fops},
+ {USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x330b, 0xff, 0xff, 0xff),
+ .driver_info = (unsigned long)&rtl8192cu_fops},
+ {USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0x4902, 0xff, 0xff, 0xff),
--- /dev/null
+From 70a3605d6d1922411b8a78499d58f140565353f7 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 29 Jun 2016 14:42:18 -0400
+Subject: [PATCH] rtl8xxxu: Fix error handling if rtl8xxxu_init_device() fails
+
+For some reason we lost the code bailing if rtl8xxxu_init_device()
+returned an error.
+
+This catches the error and also cleans up the error handling.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 20 +++++++++++++++++---
+ 1 file changed, 17 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -5947,7 +5947,7 @@ static int rtl8xxxu_probe(struct usb_int
+ struct ieee80211_hw *hw;
+ struct usb_device *udev;
+ struct ieee80211_supported_band *sband;
+- int ret = 0;
++ int ret;
+ int untested = 1;
+
+ udev = usb_get_dev(interface_to_usbdev(interface));
+@@ -5995,6 +5995,7 @@ static int rtl8xxxu_probe(struct usb_int
+ hw = ieee80211_alloc_hw(sizeof(struct rtl8xxxu_priv), &rtl8xxxu_ops);
+ if (!hw) {
+ ret = -ENOMEM;
++ priv = NULL;
+ goto exit;
+ }
+
+@@ -6043,6 +6044,8 @@ static int rtl8xxxu_probe(struct usb_int
+ }
+
+ ret = rtl8xxxu_init_device(hw);
++ if (ret)
++ goto exit;
+
+ hw->wiphy->max_scan_ssids = 1;
+ hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
+@@ -6093,9 +6096,20 @@ static int rtl8xxxu_probe(struct usb_int
+ goto exit;
+ }
+
++ return 0;
++
+ exit:
+- if (ret < 0)
+- usb_put_dev(udev);
++ usb_set_intfdata(interface, NULL);
++
++ if (priv) {
++ kfree(priv->fw_data);
++ mutex_destroy(&priv->usb_buf_mutex);
++ mutex_destroy(&priv->h2c_mutex);
++ }
++ usb_put_dev(udev);
++
++ ieee80211_free_hw(hw);
++
+ return ret;
+ }
+
--- /dev/null
+From 32e8292a3222036b934aeebe5dbf13c729dc3dfe Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 20 Jul 2016 13:18:39 -0400
+Subject: [PATCH] rtl8xxxu: Add TP-Link TL-WN823N v2 to list of supported
+ devices
+
+This is an rtl8192eu based dongle (the v1 is an rtl8192cu). Reported
+and tested by Myckel Habets.
+
+Reported-by: Myckel Habets <myckel@sdf.lonestar.org>
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -5979,6 +5979,10 @@ static int rtl8xxxu_probe(struct usb_int
+ if (id->idProduct == 0x3308)
+ untested = 0;
+ break;
++ case 0x2357:
++ if (id->idProduct == 0x0109)
++ untested = 0;
++ break;
+ default:
+ break;
+ }
+@@ -6146,6 +6150,9 @@ static struct usb_device_id dev_table[]
+ .driver_info = (unsigned long)&rtl8723au_fops},
+ {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x818b, 0xff, 0xff, 0xff),
+ .driver_info = (unsigned long)&rtl8192eu_fops},
++/* Tested by Myckel Habets */
++{USB_DEVICE_AND_INTERFACE_INFO(0x2357, 0x0109, 0xff, 0xff, 0xff),
++ .driver_info = (unsigned long)&rtl8192eu_fops},
+ {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0xb720, 0xff, 0xff, 0xff),
+ .driver_info = (unsigned long)&rtl8723bu_fops},
+ #ifdef CPTCFG_RTL8XXXU_UNTESTED
--- /dev/null
+From 36bbcb566a806b96e397cb882272373bbbed83c8 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 20 Jul 2016 15:02:20 -0400
+Subject: [PATCH] rtl8xxxu: Add TX page defines for 8723b
+
+This switches the 8723b driver to use the new
+rtl8xxxu_init_queue_reserved_page() function.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 6 ++++++
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c | 4 ++++
+ 2 files changed, 10 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+@@ -43,6 +43,7 @@
+
+ #define TX_TOTAL_PAGE_NUM 0xf8
+ #define TX_TOTAL_PAGE_NUM_8192E 0xf3
++#define TX_TOTAL_PAGE_NUM_8723B 0xf7
+ /* (HPQ + LPQ + NPQ + PUBQ) = TX_TOTAL_PAGE_NUM */
+ #define TX_PAGE_NUM_PUBQ 0xe7
+ #define TX_PAGE_NUM_HI_PQ 0x0c
+@@ -54,6 +55,11 @@
+ #define TX_PAGE_NUM_LO_PQ_8192E 0x0c
+ #define TX_PAGE_NUM_NORM_PQ_8192E 0x00
+
++#define TX_PAGE_NUM_PUBQ_8723B 0xe7
++#define TX_PAGE_NUM_HI_PQ_8723B 0x0c
++#define TX_PAGE_NUM_LO_PQ_8723B 0x02
++#define TX_PAGE_NUM_NORM_PQ_8723B 0x02
++
+ #define RTL_FW_PAGE_SIZE 4096
+ #define RTL8XXXU_FIRMWARE_POLL_MAX 1000
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
+@@ -1674,4 +1674,8 @@ struct rtl8xxxu_fileops rtl8723bu_fops =
+ .pbp_rx = PBP_PAGE_SIZE_256,
+ .pbp_tx = PBP_PAGE_SIZE_256,
+ .mactable = rtl8723b_mac_init_table,
++ .total_page_num = TX_TOTAL_PAGE_NUM_8723B,
++ .page_num_hi = TX_PAGE_NUM_HI_PQ_8723B,
++ .page_num_lo = TX_PAGE_NUM_LO_PQ_8723B,
++ .page_num_norm = TX_PAGE_NUM_NORM_PQ_8723B,
+ };
--- /dev/null
+From 0ee0d2f7f6442d5e3ae76ce1626eb018582ba4d1 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 20 Jul 2016 15:18:39 -0400
+Subject: [PATCH] rtl8xxxu: Switch 8723a to use new
+ rtl8xxxu_init_queue_reserved_page() routine
+
+This changes the pub-queue value written to REQ_RQPN, however the old
+code used a hard coded minimum value assuming there would always be an
+active lo-queue, even when no USB EP was found for it.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c
+@@ -396,4 +396,8 @@ struct rtl8xxxu_fileops rtl8723au_fops =
+ .pbp_rx = PBP_PAGE_SIZE_128,
+ .pbp_tx = PBP_PAGE_SIZE_128,
+ .mactable = rtl8xxxu_gen1_mac_init_table,
++ .total_page_num = TX_TOTAL_PAGE_NUM,
++ .page_num_hi = TX_PAGE_NUM_HI_PQ,
++ .page_num_lo = TX_PAGE_NUM_LO_PQ,
++ .page_num_norm = TX_PAGE_NUM_NORM_PQ,
+ };
--- /dev/null
+From e37da0657a3d57d6a98198f6ed730b42fca6bae7 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 20 Jul 2016 15:28:50 -0400
+Subject: [PATCH] rtl8xxxu: Switch 8192cu/8188cu devices to use
+ rtl8xxxu_init_queue_reserved_page()
+
+This was the last user of the old
+rtl8xxxu_old_init_queue_reserved_page() which can now be removed.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
+@@ -579,5 +579,9 @@ struct rtl8xxxu_fileops rtl8192cu_fops =
+ .pbp_rx = PBP_PAGE_SIZE_128,
+ .pbp_tx = PBP_PAGE_SIZE_128,
+ .mactable = rtl8xxxu_gen1_mac_init_table,
++ .total_page_num = TX_TOTAL_PAGE_NUM,
++ .page_num_hi = TX_PAGE_NUM_HI_PQ,
++ .page_num_lo = TX_PAGE_NUM_LO_PQ,
++ .page_num_norm = TX_PAGE_NUM_NORM_PQ,
+ };
+ #endif
--- /dev/null
+From d9de1941802e3887251f8f6d519ff17d5fafc516 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 20 Jul 2016 15:34:59 -0400
+Subject: [PATCH] rtl8xxxu: Remove now obsolete
+ rtl8xxxu_old_init_queue_reserved_page()
+
+Switching over the old devices to use the new function allows us to
+get rid of this legacy.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 30 ++--------------------
+ 1 file changed, 2 insertions(+), 28 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -3847,28 +3847,6 @@ void rtl8xxxu_gen2_disable_rf(struct rtl
+ rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, val32);
+ }
+
+-static void rtl8xxxu_old_init_queue_reserved_page(struct rtl8xxxu_priv *priv)
+-{
+- u8 val8;
+- u32 val32;
+-
+- if (priv->ep_tx_normal_queue)
+- val8 = TX_PAGE_NUM_NORM_PQ;
+- else
+- val8 = 0;
+-
+- rtl8xxxu_write8(priv, REG_RQPN_NPQ, val8);
+-
+- val32 = (TX_PAGE_NUM_PUBQ << RQPN_PUB_PQ_SHIFT) | RQPN_LOAD;
+-
+- if (priv->ep_tx_high_queue)
+- val32 |= (TX_PAGE_NUM_HI_PQ << RQPN_HI_PQ_SHIFT);
+- if (priv->ep_tx_low_queue)
+- val32 |= (TX_PAGE_NUM_LO_PQ << RQPN_LO_PQ_SHIFT);
+-
+- rtl8xxxu_write32(priv, REG_RQPN, val32);
+-}
+-
+ static void rtl8xxxu_init_queue_reserved_page(struct rtl8xxxu_priv *priv)
+ {
+ struct rtl8xxxu_fileops *fops = priv->fops;
+@@ -3929,12 +3907,8 @@ static int rtl8xxxu_init_device(struct i
+ goto exit;
+ }
+
+- if (!macpower) {
+- if (priv->fops->total_page_num)
+- rtl8xxxu_init_queue_reserved_page(priv);
+- else
+- rtl8xxxu_old_init_queue_reserved_page(priv);
+- }
++ if (!macpower)
++ rtl8xxxu_init_queue_reserved_page(priv);
+
+ ret = rtl8xxxu_init_queue_priority(priv);
+ dev_dbg(dev, "%s: init_queue_priority %i\n", __func__, ret);
--- /dev/null
+From 031c086dcd5e17bb1e792ba215c997adcb570844 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 20 Jul 2016 15:39:09 -0400
+Subject: [PATCH] rtl8xxxu: Simplify code setting TX buffer boundary
+
+With all devices now offering fops->total_page_num, get rid of the
+if mess for setting the TX buffer boundary.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 8 +-------
+ 1 file changed, 1 insertion(+), 7 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -3968,13 +3968,7 @@ static int rtl8xxxu_init_device(struct i
+ /*
+ * Set TX buffer boundary
+ */
+- if (priv->rtl_chip == RTL8192E)
+- val8 = TX_TOTAL_PAGE_NUM_8192E + 1;
+- else
+- val8 = TX_TOTAL_PAGE_NUM + 1;
+-
+- if (priv->rtl_chip == RTL8723B)
+- val8 -= 1;
++ val8 = priv->fops->total_page_num + 1;
+
+ rtl8xxxu_write8(priv, REG_TXPKTBUF_BCNQ_BDNY, val8);
+ rtl8xxxu_write8(priv, REG_TXPKTBUF_MGQ_BDNY, val8);
--- /dev/null
+From e3aee53b23762f47ad233591090640c6df3db3c0 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 20 Jul 2016 14:31:08 -0400
+Subject: [PATCH] rtl8xxxu: Add bit definitions for REG_FPGA0_TX_INFO
+
+This adds TX antenna selection bit defines for OFDM mode.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
+@@ -780,6 +780,10 @@
+ #define FPGA_RF_MODE_OFDM BIT(25)
+
+ #define REG_FPGA0_TX_INFO 0x0804
++#define FPGA0_TX_INFO_OFDM_PATH_A BIT(0)
++#define FPGA0_TX_INFO_OFDM_PATH_B BIT(1)
++#define FPGA0_TX_INFO_OFDM_PATH_C BIT(2)
++#define FPGA0_TX_INFO_OFDM_PATH_D BIT(3)
+ #define REG_FPGA0_PSD_FUNC 0x0808
+ #define REG_FPGA0_TX_GAIN 0x080c
+ #define REG_FPGA0_RF_TIMING1 0x0810
--- /dev/null
+From b11b4053e28ebcd35fca0b81448ee91ef88a6fed Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 20 Jul 2016 16:52:13 -0400
+Subject: [PATCH] rtl8xxxu: Add interrupt bit definitions for gen2 parts
+
+These are primarily needed for SDIO/PCI parts, but the vendor driver
+still sets them for some USB devices.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 56 ++++++++++++++++++++++
+ 1 file changed, 56 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
+@@ -213,10 +213,66 @@
+ #define REG_HMBOX_EXT_1 0x008a
+ #define REG_HMBOX_EXT_2 0x008c
+ #define REG_HMBOX_EXT_3 0x008e
++
+ /* Interrupt registers for 8192e/8723bu/8812 */
+ #define REG_HIMR0 0x00b0
++#define IMR0_TXCCK BIT(30) /* TXRPT interrupt when CCX bit
++ of the packet is set */
++#define IMR0_PSTIMEOUT BIT(29) /* Power Save Time Out Int */
++#define IMR0_GTINT4 BIT(28) /* Set when GTIMER4 expires */
++#define IMR0_GTINT3 BIT(27) /* Set when GTIMER3 expires */
++#define IMR0_TBDER BIT(26) /* Transmit Beacon0 Error */
++#define IMR0_TBDOK BIT(25) /* Transmit Beacon0 OK */
++#define IMR0_TSF_BIT32_TOGGLE BIT(24) /* TSF Timer BIT32 toggle
++ indication interrupt */
++#define IMR0_BCNDMAINT0 BIT(20) /* Beacon DMA Interrupt 0 */
++#define IMR0_BCNDERR0 BIT(16) /* Beacon Queue DMA Error 0 */
++#define IMR0_HSISR_IND_ON_INT BIT(15) /* HSISR Indicator (HSIMR &
++ HSISR is true) */
++#define IMR0_BCNDMAINT_E BIT(14) /* Beacon DMA Interrupt
++ Extension for Win7 */
++#define IMR0_ATIMEND BIT(12) /* CTWidnow End or
++ ATIM Window End */
++#define IMR0_HISR1_IND_INT BIT(11) /* HISR1 Indicator
++ (HISR1 & HIMR1 is true) */
++#define IMR0_C2HCMD BIT(10) /* CPU to Host Command INT
++ Status, Write 1 to clear */
++#define IMR0_CPWM2 BIT(9) /* CPU power Mode exchange INT
++ Status, Write 1 to clear */
++#define IMR0_CPWM BIT(8) /* CPU power Mode exchange INT
++ Status, Write 1 to clear */
++#define IMR0_HIGHDOK BIT(7) /* High Queue DMA OK */
++#define IMR0_MGNTDOK BIT(6) /* Management Queue DMA OK */
++#define IMR0_BKDOK BIT(5) /* AC_BK DMA OK */
++#define IMR0_BEDOK BIT(4) /* AC_BE DMA OK */
++#define IMR0_VIDOK BIT(3) /* AC_VI DMA OK */
++#define IMR0_VODOK BIT(2) /* AC_VO DMA OK */
++#define IMR0_RDU BIT(1) /* Rx Descriptor Unavailable */
++#define IMR0_ROK BIT(0) /* Receive DMA OK */
+ #define REG_HISR0 0x00b4
+ #define REG_HIMR1 0x00b8
++#define IMR1_BCNDMAINT7 BIT(27) /* Beacon DMA Interrupt 7 */
++#define IMR1_BCNDMAINT6 BIT(26) /* Beacon DMA Interrupt 6 */
++#define IMR1_BCNDMAINT5 BIT(25) /* Beacon DMA Interrupt 5 */
++#define IMR1_BCNDMAINT4 BIT(24) /* Beacon DMA Interrupt 4 */
++#define IMR1_BCNDMAINT3 BIT(23) /* Beacon DMA Interrupt 3 */
++#define IMR1_BCNDMAINT2 BIT(22) /* Beacon DMA Interrupt 2 */
++#define IMR1_BCNDMAINT1 BIT(21) /* Beacon DMA Interrupt 1 */
++#define IMR1_BCNDERR7 BIT(20) /* Beacon Queue DMA Err Int 7 */
++#define IMR1_BCNDERR6 BIT(19) /* Beacon Queue DMA Err Int 6 */
++#define IMR1_BCNDERR5 BIT(18) /* Beacon Queue DMA Err Int 5 */
++#define IMR1_BCNDERR4 BIT(17) /* Beacon Queue DMA Err Int 4 */
++#define IMR1_BCNDERR3 BIT(16) /* Beacon Queue DMA Err Int 3 */
++#define IMR1_BCNDERR2 BIT(15) /* Beacon Queue DMA Err Int 2 */
++#define IMR1_BCNDERR1 BIT(14) /* Beacon Queue DMA Err Int 1 */
++#define IMR1_ATIMEND_E BIT(13) /* ATIM Window End Extension
++ for Win7 */
++#define IMR1_TXERR BIT(11) /* Tx Error Flag Int Status,
++ write 1 to clear */
++#define IMR1_RXERR BIT(10) /* Rx Error Flag Int Status,
++ write 1 to clear */
++#define IMR1_TXFOVW BIT(9) /* Transmit FIFO Overflow */
++#define IMR1_RXFOVW BIT(8) /* Receive FIFO Overflow */
+ #define REG_HISR1 0x00bc
+
+ /* Host suspend counter on FPGA platform */
--- /dev/null
+From 37949932b4c8854d8122ac385bfcab725440625c Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 20 Jul 2016 16:13:06 -0400
+Subject: [PATCH] rtl8xxxu: Use flag to indicate whether device has TX report
+ timer support
+
+Use a fileops flag to indicate whether the device has TX report timer
+support. This will make it easier to include future devices such as
+8188eu to use the TX report timer.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 1 +
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c | 1 +
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 5 ++---
+ 3 files changed, 4 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+@@ -1341,6 +1341,7 @@ struct rtl8xxxu_fileops {
+ char tx_desc_size;
+ char rx_desc_size;
+ char has_s0s1;
++ char has_tx_report;
+ u32 adda_1t_init;
+ u32 adda_1t_path_on;
+ u32 adda_2t_path_on_a;
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
+@@ -1666,6 +1666,7 @@ struct rtl8xxxu_fileops rtl8723bu_fops =
+ .tx_desc_size = sizeof(struct rtl8xxxu_txdesc40),
+ .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24),
+ .has_s0s1 = 1,
++ .has_tx_report = 1,
+ .adda_1t_init = 0x01c00014,
+ .adda_1t_path_on = 0x01c00014,
+ .adda_2t_path_on_a = 0x01c00014,
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -4000,10 +4000,9 @@ static int rtl8xxxu_init_device(struct i
+ priv->fops->usb_quirks(priv);
+
+ /*
+- * Presumably this is for 8188EU as well
+- * Enable TX report and TX report timer
++ * Enable TX report and TX report timer for 8723bu/8188eu/...
+ */
+- if (priv->rtl_chip == RTL8723B) {
++ if (priv->fops->has_tx_report) {
+ val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
+ val8 |= TX_REPORT_CTRL_TIMER_ENABLE;
+ rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
--- /dev/null
+From 2edfdaa9d373a12582647ab06b9f09e43853c602 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Fri, 22 Jul 2016 11:15:15 -0400
+Subject: [PATCH] rtl8xxxu: Convert flags in rtl8xxxu_fileops to bitflags
+
+This leaves space for a few more flags within the same space.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+@@ -1340,8 +1340,8 @@ struct rtl8xxxu_fileops {
+ int rx_agg_buf_size;
+ char tx_desc_size;
+ char rx_desc_size;
+- char has_s0s1;
+- char has_tx_report;
++ u8 has_s0s1:1;
++ u8 has_tx_report:1;
+ u32 adda_1t_init;
+ u32 adda_1t_path_on;
+ u32 adda_2t_path_on_a;
--- /dev/null
+From 99919affd249419a20984f96c7876fc6ec3759a8 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Fri, 22 Jul 2016 11:18:36 -0400
+Subject: [PATCH] rtl8xxxu: Introduce fops bitflag indicating type of thermal
+ meter
+
+Do not rely on TX descriptor size to determine the thermal meter
+type.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 1 +
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c | 1 +
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c | 1 +
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 2 +-
+ 4 files changed, 4 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+@@ -1342,6 +1342,7 @@ struct rtl8xxxu_fileops {
+ char rx_desc_size;
+ u8 has_s0s1:1;
+ u8 has_tx_report:1;
++ u8 gen2_thermal_meter:1;
+ u32 adda_1t_init;
+ u32 adda_1t_path_on;
+ u32 adda_2t_path_on_a;
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
+@@ -1505,6 +1505,7 @@ struct rtl8xxxu_fileops rtl8192eu_fops =
+ .tx_desc_size = sizeof(struct rtl8xxxu_txdesc40),
+ .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24),
+ .has_s0s1 = 0,
++ .gen2_thermal_meter = 1,
+ .adda_1t_init = 0x0fc01616,
+ .adda_1t_path_on = 0x0fc01616,
+ .adda_2t_path_on_a = 0x0fc01616,
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
+@@ -1667,6 +1667,7 @@ struct rtl8xxxu_fileops rtl8723bu_fops =
+ .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24),
+ .has_s0s1 = 1,
+ .has_tx_report = 1,
++ .gen2_thermal_meter = 1,
+ .adda_1t_init = 0x01c00014,
+ .adda_1t_path_on = 0x01c00014,
+ .adda_2t_path_on_a = 0x01c00014,
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -4195,7 +4195,7 @@ static int rtl8xxxu_init_device(struct i
+ /*
+ * This should enable thermal meter
+ */
+- if (priv->fops->tx_desc_size == sizeof(struct rtl8xxxu_txdesc40))
++ if (priv->fops->gen2_thermal_meter)
+ rtl8xxxu_write_rfreg(priv,
+ RF_A, RF6052_REG_T_METER_8723B, 0x37cf8);
+ else
--- /dev/null
+From dae8758ca00ceaf71253471dc79de6a2749cb722 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Mon, 25 Jul 2016 13:06:24 -0400
+Subject: [PATCH] rtl8xxxu: Simplify calculating of hw value used for setting
+ TX rate
+
+Calculating the value in one place rather than using one calculation
+in one place and a different one for management frames in another
+location makes little sense.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 7 ++++---
+ 1 file changed, 4 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -4848,7 +4848,8 @@ static void rtl8xxxu_tx(struct ieee80211
+ }
+ }
+
+- if (rate_flag & IEEE80211_TX_RC_MCS)
++ if (rate_flag & IEEE80211_TX_RC_MCS &&
++ !ieee80211_is_mgmt(hdr->frame_control))
+ rate = tx_info->control.rates[0].idx + DESC_RATE_MCS0;
+ else
+ rate = tx_rate->hw_value;
+@@ -4869,7 +4870,7 @@ static void rtl8xxxu_tx(struct ieee80211
+ tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_BREAK);
+
+ if (ieee80211_is_mgmt(hdr->frame_control)) {
+- tx_desc->txdw5 = cpu_to_le32(tx_rate->hw_value);
++ tx_desc->txdw5 = cpu_to_le32(rate);
+ tx_desc->txdw4 |=
+ cpu_to_le32(TXDESC32_USE_DRIVER_RATE);
+ tx_desc->txdw5 |=
+@@ -4923,7 +4924,7 @@ static void rtl8xxxu_tx(struct ieee80211
+ tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_BREAK);
+
+ if (ieee80211_is_mgmt(hdr->frame_control)) {
+- tx_desc40->txdw4 = cpu_to_le32(tx_rate->hw_value);
++ tx_desc40->txdw4 = cpu_to_le32(rate);
+ tx_desc40->txdw3 |=
+ cpu_to_le32(TXDESC40_USE_DRIVER_RATE);
+ tx_desc40->txdw4 |=
--- /dev/null
+From 20296682e77606561c3899e6f2f4f881974472f3 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Mon, 25 Jul 2016 13:14:02 -0400
+Subject: [PATCH] rtl8xxxu: Determine the need for SGI before handling specific
+ TX desc formats
+
+In order to be able to split out the TX descriptor handling code,
+determine in advance the need to mark SGI.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 14 ++++++++------
+ 1 file changed, 8 insertions(+), 6 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -4770,7 +4770,7 @@ static void rtl8xxxu_tx(struct ieee80211
+ u16 rate_flag = tx_info->control.rates[0].flags;
+ int tx_desc_size = priv->fops->tx_desc_size;
+ int ret;
+- bool usedesc40, ampdu_enable;
++ bool usedesc40, ampdu_enable, sgi = false;
+
+ if (skb_headroom(skb) < tx_desc_size) {
+ dev_warn(dev,
+@@ -4854,6 +4854,12 @@ static void rtl8xxxu_tx(struct ieee80211
+ else
+ rate = tx_rate->hw_value;
+
++ if (rate_flag & IEEE80211_TX_RC_SHORT_GI ||
++ (ieee80211_is_data_qos(hdr->frame_control) &&
++ sta && sta->ht_cap.cap &
++ (IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SGI_20)))
++ sgi = true;
++
+ seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
+ if (!usedesc40) {
+ tx_desc->txdw5 = cpu_to_le32(rate);
+@@ -4886,12 +4892,8 @@ static void rtl8xxxu_tx(struct ieee80211
+ (sta && vif && vif->bss_conf.use_short_preamble))
+ tx_desc->txdw4 |= cpu_to_le32(TXDESC32_SHORT_PREAMBLE);
+
+- if (rate_flag & IEEE80211_TX_RC_SHORT_GI ||
+- (ieee80211_is_data_qos(hdr->frame_control) &&
+- sta && sta->ht_cap.cap &
+- (IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SGI_20))) {
++ if (sgi)
+ tx_desc->txdw5 |= cpu_to_le32(TXDESC32_SHORT_GI);
+- }
+
+ if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) {
+ /*
--- /dev/null
+From 36109f7398a02f07a32051d1483e3e9ae7a4ad4b Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Mon, 25 Jul 2016 13:17:42 -0400
+Subject: [PATCH] rtl8xxxu: Determine need for shore preamble before updating
+ TX descriptors
+
+Another patch to move this detection out of the code handling the TX
+descriptor update.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 12 +++++++-----
+ 1 file changed, 7 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -4770,7 +4770,7 @@ static void rtl8xxxu_tx(struct ieee80211
+ u16 rate_flag = tx_info->control.rates[0].flags;
+ int tx_desc_size = priv->fops->tx_desc_size;
+ int ret;
+- bool usedesc40, ampdu_enable, sgi = false;
++ bool usedesc40, ampdu_enable, sgi = false, short_preamble = false;
+
+ if (skb_headroom(skb) < tx_desc_size) {
+ dev_warn(dev,
+@@ -4860,6 +4860,10 @@ static void rtl8xxxu_tx(struct ieee80211
+ (IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SGI_20)))
+ sgi = true;
+
++ if (rate_flag & IEEE80211_TX_RC_USE_SHORT_PREAMBLE ||
++ (sta && vif && vif->bss_conf.use_short_preamble))
++ short_preamble = true;
++
+ seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
+ if (!usedesc40) {
+ tx_desc->txdw5 = cpu_to_le32(rate);
+@@ -4888,8 +4892,7 @@ static void rtl8xxxu_tx(struct ieee80211
+ if (ieee80211_is_data_qos(hdr->frame_control))
+ tx_desc->txdw4 |= cpu_to_le32(TXDESC32_QOS);
+
+- if (rate_flag & IEEE80211_TX_RC_USE_SHORT_PREAMBLE ||
+- (sta && vif && vif->bss_conf.use_short_preamble))
++ if (short_preamble)
+ tx_desc->txdw4 |= cpu_to_le32(TXDESC32_SHORT_PREAMBLE);
+
+ if (sgi)
+@@ -4935,8 +4938,7 @@ static void rtl8xxxu_tx(struct ieee80211
+ cpu_to_le32(TXDESC40_RETRY_LIMIT_ENABLE);
+ }
+
+- if (rate_flag & IEEE80211_TX_RC_USE_SHORT_PREAMBLE ||
+- (sta && vif && vif->bss_conf.use_short_preamble))
++ if (short_preamble)
+ tx_desc40->txdw5 |=
+ cpu_to_le32(TXDESC40_SHORT_PREAMBLE);
+
--- /dev/null
+From 57a46cf908c7a9dfa871494fb45ad914905c991a Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Mon, 25 Jul 2016 14:21:21 -0400
+Subject: [PATCH] rtl8xxxu: Split filling of TX descriptors into separate
+ functions
+
+Split the filling of TX descriptors into a generic portion used on all
+devices, and format specific helper functions provided in the fops
+structure.
+
+This also cleaned up some mess, even if non harmful, in the handling
+of txdesc40 descriptors, where the code randomly would switch between
+the pointer to tx_desc and tx_desc40.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 12 ++
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c | 1 +
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c | 1 +
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c | 1 +
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c | 1 +
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 198 ++++++++++++---------
+ 6 files changed, 125 insertions(+), 89 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+@@ -1336,6 +1336,10 @@ struct rtl8xxxu_fileops {
+ u32 ramask, int sgi);
+ void (*report_connect) (struct rtl8xxxu_priv *priv,
+ u8 macid, bool connect);
++ void (*fill_txdesc) (struct ieee80211_hdr *hdr,
++ struct rtl8xxxu_txdesc32 *tx_desc, u32 rate,
++ u16 rate_flag, bool sgi, bool short_preamble,
++ bool ampdu_enable);
+ int writeN_block_size;
+ int rx_agg_buf_size;
+ char tx_desc_size;
+@@ -1429,6 +1433,14 @@ int rtl8xxxu_parse_rxdesc24(struct rtl8x
+ int rtl8xxxu_gen2_channel_to_group(int channel);
+ bool rtl8xxxu_gen2_simularity_compare(struct rtl8xxxu_priv *priv,
+ int result[][8], int c1, int c2);
++void rtl8xxxu_fill_txdesc_v1(struct ieee80211_hdr *hdr,
++ struct rtl8xxxu_txdesc32 *tx_desc, u32 rate,
++ u16 rate_flag, bool sgi, bool short_preamble,
++ bool ampdu_enable);
++void rtl8xxxu_fill_txdesc_v2(struct ieee80211_hdr *hdr,
++ struct rtl8xxxu_txdesc32 *tx_desc32, u32 rate,
++ u16 rate_flag, bool sgi, bool short_preamble,
++ bool ampdu_enable);
+
+ extern struct rtl8xxxu_fileops rtl8192cu_fops;
+ extern struct rtl8xxxu_fileops rtl8192eu_fops;
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
+@@ -567,6 +567,7 @@ struct rtl8xxxu_fileops rtl8192cu_fops =
+ .set_tx_power = rtl8xxxu_gen1_set_tx_power,
+ .update_rate_mask = rtl8xxxu_update_rate_mask,
+ .report_connect = rtl8xxxu_gen1_report_connect,
++ .fill_txdesc = rtl8xxxu_fill_txdesc_v1,
+ .writeN_block_size = 128,
+ .rx_agg_buf_size = 16000,
+ .tx_desc_size = sizeof(struct rtl8xxxu_txdesc32),
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
+@@ -1501,6 +1501,7 @@ struct rtl8xxxu_fileops rtl8192eu_fops =
+ .set_tx_power = rtl8192e_set_tx_power,
+ .update_rate_mask = rtl8xxxu_gen2_update_rate_mask,
+ .report_connect = rtl8xxxu_gen2_report_connect,
++ .fill_txdesc = rtl8xxxu_fill_txdesc_v2,
+ .writeN_block_size = 128,
+ .tx_desc_size = sizeof(struct rtl8xxxu_txdesc40),
+ .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24),
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c
+@@ -384,6 +384,7 @@ struct rtl8xxxu_fileops rtl8723au_fops =
+ .set_tx_power = rtl8xxxu_gen1_set_tx_power,
+ .update_rate_mask = rtl8xxxu_update_rate_mask,
+ .report_connect = rtl8xxxu_gen1_report_connect,
++ .fill_txdesc = rtl8xxxu_fill_txdesc_v1,
+ .writeN_block_size = 1024,
+ .rx_agg_buf_size = 16000,
+ .tx_desc_size = sizeof(struct rtl8xxxu_txdesc32),
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
+@@ -1662,6 +1662,7 @@ struct rtl8xxxu_fileops rtl8723bu_fops =
+ .set_tx_power = rtl8723b_set_tx_power,
+ .update_rate_mask = rtl8xxxu_gen2_update_rate_mask,
+ .report_connect = rtl8xxxu_gen2_report_connect,
++ .fill_txdesc = rtl8xxxu_fill_txdesc_v2,
+ .writeN_block_size = 1024,
+ .tx_desc_size = sizeof(struct rtl8xxxu_txdesc40),
+ .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24),
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -4750,6 +4750,113 @@ static void rtl8xxxu_dump_action(struct
+ }
+ }
+
++/*
++ * Fill in v1 (gen1) specific TX descriptor bits.
++ * This format is used on 8188cu/8192cu/8723au
++ */
++void
++rtl8xxxu_fill_txdesc_v1(struct ieee80211_hdr *hdr,
++ struct rtl8xxxu_txdesc32 *tx_desc, u32 rate,
++ u16 rate_flag, bool sgi, bool short_preamble,
++ bool ampdu_enable)
++{
++ u16 seq_number;
++
++ seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
++
++ tx_desc->txdw5 = cpu_to_le32(rate);
++
++ if (ieee80211_is_data(hdr->frame_control))
++ tx_desc->txdw5 |= cpu_to_le32(0x0001ff00);
++
++ tx_desc->txdw3 = cpu_to_le32((u32)seq_number << TXDESC32_SEQ_SHIFT);
++
++ if (ampdu_enable)
++ tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_ENABLE);
++ else
++ tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_BREAK);
++
++ if (ieee80211_is_mgmt(hdr->frame_control)) {
++ tx_desc->txdw5 = cpu_to_le32(rate);
++ tx_desc->txdw4 |= cpu_to_le32(TXDESC32_USE_DRIVER_RATE);
++ tx_desc->txdw5 |= cpu_to_le32(6 << TXDESC32_RETRY_LIMIT_SHIFT);
++ tx_desc->txdw5 |= cpu_to_le32(TXDESC32_RETRY_LIMIT_ENABLE);
++ }
++
++ if (ieee80211_is_data_qos(hdr->frame_control))
++ tx_desc->txdw4 |= cpu_to_le32(TXDESC32_QOS);
++
++ if (short_preamble)
++ tx_desc->txdw4 |= cpu_to_le32(TXDESC32_SHORT_PREAMBLE);
++
++ if (sgi)
++ tx_desc->txdw5 |= cpu_to_le32(TXDESC32_SHORT_GI);
++
++ if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) {
++ /*
++ * Use RTS rate 24M - does the mac80211 tell
++ * us which to use?
++ */
++ tx_desc->txdw4 |= cpu_to_le32(DESC_RATE_24M <<
++ TXDESC32_RTS_RATE_SHIFT);
++ tx_desc->txdw4 |= cpu_to_le32(TXDESC32_RTS_CTS_ENABLE);
++ tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE);
++ }
++}
++
++/*
++ * Fill in v2 (gen2) specific TX descriptor bits.
++ * This format is used on 8192eu/8723bu
++ */
++void
++rtl8xxxu_fill_txdesc_v2(struct ieee80211_hdr *hdr,
++ struct rtl8xxxu_txdesc32 *tx_desc32, u32 rate,
++ u16 rate_flag, bool sgi, bool short_preamble,
++ bool ampdu_enable)
++{
++ struct rtl8xxxu_txdesc40 *tx_desc40;
++ u16 seq_number;
++
++ tx_desc40 = (struct rtl8xxxu_txdesc40 *)tx_desc32;
++
++ seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
++
++ tx_desc40->txdw4 = cpu_to_le32(rate);
++ if (ieee80211_is_data(hdr->frame_control)) {
++ tx_desc40->txdw4 |= cpu_to_le32(0x1f <<
++ TXDESC40_DATA_RATE_FB_SHIFT);
++ }
++
++ tx_desc40->txdw9 = cpu_to_le32((u32)seq_number << TXDESC40_SEQ_SHIFT);
++
++ if (ampdu_enable)
++ tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_ENABLE);
++ else
++ tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_BREAK);
++
++ if (ieee80211_is_mgmt(hdr->frame_control)) {
++ tx_desc40->txdw4 = cpu_to_le32(rate);
++ tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_USE_DRIVER_RATE);
++ tx_desc40->txdw4 |=
++ cpu_to_le32(6 << TXDESC40_RETRY_LIMIT_SHIFT);
++ tx_desc40->txdw4 |= cpu_to_le32(TXDESC40_RETRY_LIMIT_ENABLE);
++ }
++
++ if (short_preamble)
++ tx_desc40->txdw5 |= cpu_to_le32(TXDESC40_SHORT_PREAMBLE);
++
++ if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) {
++ /*
++ * Use RTS rate 24M - does the mac80211 tell
++ * us which to use?
++ */
++ tx_desc40->txdw4 |= cpu_to_le32(DESC_RATE_24M <<
++ TXDESC40_RTS_RATE_SHIFT);
++ tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_RTS_CTS_ENABLE);
++ tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_HW_RTS_ENABLE);
++ }
++}
++
+ static void rtl8xxxu_tx(struct ieee80211_hw *hw,
+ struct ieee80211_tx_control *control,
+ struct sk_buff *skb)
+@@ -4759,7 +4866,6 @@ static void rtl8xxxu_tx(struct ieee80211
+ struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info);
+ struct rtl8xxxu_priv *priv = hw->priv;
+ struct rtl8xxxu_txdesc32 *tx_desc;
+- struct rtl8xxxu_txdesc40 *tx_desc40;
+ struct rtl8xxxu_tx_urb *tx_urb;
+ struct ieee80211_sta *sta = NULL;
+ struct ieee80211_vif *vif = tx_info->control.vif;
+@@ -4865,95 +4971,9 @@ static void rtl8xxxu_tx(struct ieee80211
+ short_preamble = true;
+
+ seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
+- if (!usedesc40) {
+- tx_desc->txdw5 = cpu_to_le32(rate);
+-
+- if (ieee80211_is_data(hdr->frame_control))
+- tx_desc->txdw5 |= cpu_to_le32(0x0001ff00);
+-
+- tx_desc->txdw3 =
+- cpu_to_le32((u32)seq_number << TXDESC32_SEQ_SHIFT);
+-
+- if (ampdu_enable)
+- tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_ENABLE);
+- else
+- tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_BREAK);
+-
+- if (ieee80211_is_mgmt(hdr->frame_control)) {
+- tx_desc->txdw5 = cpu_to_le32(rate);
+- tx_desc->txdw4 |=
+- cpu_to_le32(TXDESC32_USE_DRIVER_RATE);
+- tx_desc->txdw5 |=
+- cpu_to_le32(6 << TXDESC32_RETRY_LIMIT_SHIFT);
+- tx_desc->txdw5 |=
+- cpu_to_le32(TXDESC32_RETRY_LIMIT_ENABLE);
+- }
+-
+- if (ieee80211_is_data_qos(hdr->frame_control))
+- tx_desc->txdw4 |= cpu_to_le32(TXDESC32_QOS);
+
+- if (short_preamble)
+- tx_desc->txdw4 |= cpu_to_le32(TXDESC32_SHORT_PREAMBLE);
+-
+- if (sgi)
+- tx_desc->txdw5 |= cpu_to_le32(TXDESC32_SHORT_GI);
+-
+- if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) {
+- /*
+- * Use RTS rate 24M - does the mac80211 tell
+- * us which to use?
+- */
+- tx_desc->txdw4 |=
+- cpu_to_le32(DESC_RATE_24M <<
+- TXDESC32_RTS_RATE_SHIFT);
+- tx_desc->txdw4 |=
+- cpu_to_le32(TXDESC32_RTS_CTS_ENABLE);
+- tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE);
+- }
+- } else {
+- tx_desc40 = (struct rtl8xxxu_txdesc40 *)tx_desc;
+-
+- tx_desc40->txdw4 = cpu_to_le32(rate);
+- if (ieee80211_is_data(hdr->frame_control)) {
+- tx_desc->txdw4 |=
+- cpu_to_le32(0x1f <<
+- TXDESC40_DATA_RATE_FB_SHIFT);
+- }
+-
+- tx_desc40->txdw9 =
+- cpu_to_le32((u32)seq_number << TXDESC40_SEQ_SHIFT);
+-
+- if (ampdu_enable)
+- tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_ENABLE);
+- else
+- tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_BREAK);
+-
+- if (ieee80211_is_mgmt(hdr->frame_control)) {
+- tx_desc40->txdw4 = cpu_to_le32(rate);
+- tx_desc40->txdw3 |=
+- cpu_to_le32(TXDESC40_USE_DRIVER_RATE);
+- tx_desc40->txdw4 |=
+- cpu_to_le32(6 << TXDESC40_RETRY_LIMIT_SHIFT);
+- tx_desc40->txdw4 |=
+- cpu_to_le32(TXDESC40_RETRY_LIMIT_ENABLE);
+- }
+-
+- if (short_preamble)
+- tx_desc40->txdw5 |=
+- cpu_to_le32(TXDESC40_SHORT_PREAMBLE);
+-
+- if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) {
+- /*
+- * Use RTS rate 24M - does the mac80211 tell
+- * us which to use?
+- */
+- tx_desc->txdw4 |=
+- cpu_to_le32(DESC_RATE_24M <<
+- TXDESC40_RTS_RATE_SHIFT);
+- tx_desc->txdw3 |= cpu_to_le32(TXDESC40_RTS_CTS_ENABLE);
+- tx_desc->txdw3 |= cpu_to_le32(TXDESC40_HW_RTS_ENABLE);
+- }
+- }
++ priv->fops->fill_txdesc(hdr, tx_desc, rate, rate_flag,
++ sgi, short_preamble, ampdu_enable);
+
+ rtl8xxxu_calc_tx_desc_csum(tx_desc);
+
--- /dev/null
+From 455c72dcc58c79885888c3a45043c5d80c8372d1 Mon Sep 17 00:00:00 2001
+From: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
+Date: Tue, 12 Jul 2016 14:33:34 +0000
+Subject: [PATCH] rtl8xxxu: gen1: Fix non static symbol warning
+
+Fixes the following sparse warning:
+
+drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:898:1: warning:
+ symbol 'rtl8xxxu_gen1_h2c_cmd' was not declared. Should it be static?
+
+Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -894,7 +894,7 @@ int rtl8xxxu_write_rfreg(struct rtl8xxxu
+ return retval;
+ }
+
+-int
++static int
+ rtl8xxxu_gen1_h2c_cmd(struct rtl8xxxu_priv *priv, struct h2c_cmd *h2c, int len)
+ {
+ struct device *dev = &priv->udev->dev;
--- /dev/null
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -5696,7 +5696,7 @@ rtl8xxxu_ampdu_action(struct ieee80211_h
+
+ switch (action) {
+ case IEEE80211_AMPDU_TX_START:
+- dev_info(dev, "%s: IEEE80211_AMPDU_TX_START\n", __func__);
++ dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_START\n", __func__);
+ ampdu_factor = sta->ht_cap.ampdu_factor;
+ ampdu_density = sta->ht_cap.ampdu_density;
+ rtl8xxxu_set_ampdu_factor(priv, ampdu_factor);
+@@ -5706,21 +5706,21 @@ rtl8xxxu_ampdu_action(struct ieee80211_h
+ ampdu_factor, ampdu_density);
+ break;
+ case IEEE80211_AMPDU_TX_STOP_FLUSH:
+- dev_info(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH\n", __func__);
++ dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH\n", __func__);
+ rtl8xxxu_set_ampdu_factor(priv, 0);
+ rtl8xxxu_set_ampdu_min_space(priv, 0);
+ break;
+ case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
+- dev_info(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH_CONT\n",
++ dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH_CONT\n",
+ __func__);
+ rtl8xxxu_set_ampdu_factor(priv, 0);
+ rtl8xxxu_set_ampdu_min_space(priv, 0);
+ break;
+ case IEEE80211_AMPDU_RX_START:
+- dev_info(dev, "%s: IEEE80211_AMPDU_RX_START\n", __func__);
++ dev_dbg(dev, "%s: IEEE80211_AMPDU_RX_START\n", __func__);
+ break;
+ case IEEE80211_AMPDU_RX_STOP:
+- dev_info(dev, "%s: IEEE80211_AMPDU_RX_STOP\n", __func__);
++ dev_dbg(dev, "%s: IEEE80211_AMPDU_RX_STOP\n", __func__);
+ break;
+ default:
+ break;
--- /dev/null
+From dc8f9f320eada9b516a347f34e9e02dae93334ca Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Thu, 1 Sep 2016 15:08:57 -0400
+Subject: [PATCH] rtl8xxxu: Reset device on module unload if still attached
+
+If the USB dongle is still attached, reset it on module unload to
+avoid scans failing when reloading the driver.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -6129,6 +6129,11 @@ static void rtl8xxxu_disconnect(struct u
+ mutex_destroy(&priv->usb_buf_mutex);
+ mutex_destroy(&priv->h2c_mutex);
+
++ if (priv->udev->state != USB_STATE_NOTATTACHED) {
++ dev_info(&priv->udev->dev,
++ "Device still attached, trying to reset\n");
++ usb_reset_device(priv->udev);
++ }
+ usb_put_dev(priv->udev);
+ ieee80211_free_hw(hw);
+ }
--- /dev/null
+From 398103a0c2c48445e11855c693877126aed23c6e Mon Sep 17 00:00:00 2001
+From: Colin Ian King <colin.king@canonical.com>
+Date: Sat, 3 Sep 2016 17:43:54 +0100
+Subject: [PATCH] rtl8xxxu: fix spelling mistake "firmare" -> "firmware"
+
+Trivial fix to spelling mistakes in dev_dbg message.
+
+Signed-off-by: Colin Ian King <colin.king@canonical.com>
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -3921,11 +3921,11 @@ static int rtl8xxxu_init_device(struct i
+ rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, priv->fops->trxff_boundary);
+
+ ret = rtl8xxxu_download_firmware(priv);
+- dev_dbg(dev, "%s: download_fiwmare %i\n", __func__, ret);
++ dev_dbg(dev, "%s: download_firmware %i\n", __func__, ret);
+ if (ret)
+ goto exit;
+ ret = rtl8xxxu_start_firmware(priv);
+- dev_dbg(dev, "%s: start_fiwmare %i\n", __func__, ret);
++ dev_dbg(dev, "%s: start_firmware %i\n", __func__, ret);
+ if (ret)
+ goto exit;
+
--- /dev/null
+From c37241da2ccb981598ed4bf243f86228aca292b6 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Tue, 13 Sep 2016 14:51:43 -0400
+Subject: [PATCH] rtl8xxxu: Implement 8192e specific power down sequence
+
+This powers down the 8192e correctly, or at least to the point where
+the firmware will load again, when reloading the driver module.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c | 144 ++++++++++++++++++++-
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 1 +
+ 2 files changed, 144 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
+@@ -1396,6 +1396,114 @@ exit:
+ return ret;
+ }
+
++static int rtl8192eu_active_to_lps(struct rtl8xxxu_priv *priv)
++{
++ struct device *dev = &priv->udev->dev;
++ u8 val8;
++ u16 val16;
++ u32 val32;
++ int retry, retval;
++
++ rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
++
++ retry = 100;
++ retval = -EBUSY;
++ /*
++ * Poll 32 bit wide 0x05f8 for 0x00000000 to ensure no TX is pending.
++ */
++ do {
++ val32 = rtl8xxxu_read32(priv, REG_SCH_TX_CMD);
++ if (!val32) {
++ retval = 0;
++ break;
++ }
++ } while (retry--);
++
++ if (!retry) {
++ dev_warn(dev, "Failed to flush TX queue\n");
++ retval = -EBUSY;
++ goto out;
++ }
++
++ /* Disable CCK and OFDM, clock gated */
++ val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
++ val8 &= ~SYS_FUNC_BBRSTB;
++ rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
++
++ udelay(2);
++
++ /* Reset whole BB */
++ val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
++ val8 &= ~SYS_FUNC_BB_GLB_RSTN;
++ rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
++
++ /* Reset MAC TRX */
++ val16 = rtl8xxxu_read16(priv, REG_CR);
++ val16 &= 0xff00;
++ val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE);
++ rtl8xxxu_write16(priv, REG_CR, val16);
++
++ val16 = rtl8xxxu_read16(priv, REG_CR);
++ val16 &= ~CR_SECURITY_ENABLE;
++ rtl8xxxu_write16(priv, REG_CR, val16);
++
++ val8 = rtl8xxxu_read8(priv, REG_DUAL_TSF_RST);
++ val8 |= DUAL_TSF_TX_OK;
++ rtl8xxxu_write8(priv, REG_DUAL_TSF_RST, val8);
++
++out:
++ return retval;
++}
++
++static int rtl8192eu_active_to_emu(struct rtl8xxxu_priv *priv)
++{
++ u8 val8;
++ int count, ret = 0;
++
++ /* Turn off RF */
++ rtl8xxxu_write8(priv, REG_RF_CTRL, 0);
++
++ /* Switch DPDT_SEL_P output from register 0x65[2] */
++ val8 = rtl8xxxu_read8(priv, REG_LEDCFG2);
++ val8 &= ~LEDCFG2_DPDT_SELECT;
++ rtl8xxxu_write8(priv, REG_LEDCFG2, val8);
++
++ /* 0x0005[1] = 1 turn off MAC by HW state machine*/
++ val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
++ val8 |= BIT(1);
++ rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
++
++ for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
++ val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
++ if ((val8 & BIT(1)) == 0)
++ break;
++ udelay(10);
++ }
++
++ if (!count) {
++ dev_warn(&priv->udev->dev, "%s: Disabling MAC timed out\n",
++ __func__);
++ ret = -EBUSY;
++ goto exit;
++ }
++
++exit:
++ return ret;
++}
++
++static int rtl8192eu_emu_to_disabled(struct rtl8xxxu_priv *priv)
++{
++ u8 val8;
++
++ /* 0x04[12:11] = 01 enable WL suspend */
++ val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
++ val8 &= ~(BIT(3) | BIT(4));
++ val8 |= BIT(3);
++ rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
++
++ return 0;
++}
++
+ static int rtl8192eu_power_on(struct rtl8xxxu_priv *priv)
+ {
+ u16 val16;
+@@ -1446,6 +1554,40 @@ exit:
+ return ret;
+ }
+
++void rtl8192eu_power_off(struct rtl8xxxu_priv *priv)
++{
++ u8 val8;
++ u16 val16;
++
++ rtl8xxxu_flush_fifo(priv);
++
++ val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
++ val8 &= ~TX_REPORT_CTRL_TIMER_ENABLE;
++ rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
++
++ /* Turn off RF */
++ rtl8xxxu_write8(priv, REG_RF_CTRL, 0x00);
++
++ rtl8192eu_active_to_lps(priv);
++
++ /* Reset Firmware if running in RAM */
++ if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL)
++ rtl8xxxu_firmware_self_reset(priv);
++
++ /* Reset MCU */
++ val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
++ val16 &= ~SYS_FUNC_CPU_ENABLE;
++ rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
++
++ /* Reset MCU ready status */
++ rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00);
++
++ rtl8xxxu_reset_8051(priv);
++
++ rtl8192eu_active_to_emu(priv);
++ rtl8192eu_emu_to_disabled(priv);
++}
++
+ static void rtl8192e_enable_rf(struct rtl8xxxu_priv *priv)
+ {
+ u32 val32;
+@@ -1487,7 +1629,7 @@ struct rtl8xxxu_fileops rtl8192eu_fops =
+ .parse_efuse = rtl8192eu_parse_efuse,
+ .load_firmware = rtl8192eu_load_firmware,
+ .power_on = rtl8192eu_power_on,
+- .power_off = rtl8xxxu_power_off,
++ .power_off = rtl8192eu_power_off,
+ .reset_8051 = rtl8xxxu_reset_8051,
+ .llt_init = rtl8xxxu_auto_llt_table,
+ .init_phy_bb = rtl8192eu_init_phy_bb,
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
+@@ -676,6 +676,7 @@
+ #define REG_SCH_TXCMD 0x05d0
+
+ /* define REG_FW_TSF_SYNC_CNT 0x04a0 */
++#define REG_SCH_TX_CMD 0x05f8
+ #define REG_FW_RESET_TSF_CNT_1 0x05fc
+ #define REG_FW_RESET_TSF_CNT_0 0x05fd
+ #define REG_FW_BCN_DIS_CNT 0x05fe
--- /dev/null
+From 738e72f09accebe95513ff7201e1b12427b4a80f Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Mon, 27 Jun 2016 14:08:47 -0400
+Subject: [PATCH] rtl8xxxu: Accept firmware signature 0x88e0
+
+rtl8188eu uses firmware signature 0x88e0
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -2097,6 +2097,7 @@ int rtl8xxxu_load_firmware(struct rtl8xx
+ switch (signature & 0xfff0) {
+ case 0x92e0:
+ case 0x92c0:
++ case 0x88e0:
+ case 0x88c0:
+ case 0x5300:
+ case 0x2300:
--- /dev/null
+From d62628f1e4245a28921f6d326440387c33c23bc2 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Mon, 27 Jun 2016 14:23:44 -0400
+Subject: [PATCH] rtl8xxxu: Add initial code to detect 8188eu devices
+
+So far this just detects the device and tries to load firmware.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/Makefile | 2 +-
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 1 +
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 65 ++++++++++++++++++++++
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 3 +
+ 4 files changed, 70 insertions(+), 1 deletion(-)
+ create mode 100644 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/Makefile
++++ b/drivers/net/wireless/realtek/rtl8xxxu/Makefile
+@@ -1,4 +1,4 @@
+ obj-$(CPTCFG_RTL8XXXU) += rtl8xxxu.o
+
+ rtl8xxxu-y := rtl8xxxu_core.o rtl8xxxu_8192e.o rtl8xxxu_8723b.o \
+- rtl8xxxu_8723a.o rtl8xxxu_8192c.o
++ rtl8xxxu_8723a.o rtl8xxxu_8192c.o rtl8xxxu_8188e.o
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+@@ -1442,6 +1442,7 @@ void rtl8xxxu_fill_txdesc_v2(struct ieee
+ u16 rate_flag, bool sgi, bool short_preamble,
+ bool ampdu_enable);
+
++extern struct rtl8xxxu_fileops rtl8188eu_fops;
+ extern struct rtl8xxxu_fileops rtl8192cu_fops;
+ extern struct rtl8xxxu_fileops rtl8192eu_fops;
+ extern struct rtl8xxxu_fileops rtl8723au_fops;
+--- /dev/null
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -0,0 +1,65 @@
++/*
++ * RTL8XXXU mac80211 USB driver - 8188e specific subdriver
++ *
++ * Copyright (c) 2014 - 2016 Jes Sorensen <Jes.Sorensen@redhat.com>
++ *
++ * Portions, notably calibration code:
++ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
++ *
++ * This driver was written as a replacement for the vendor provided
++ * rtl8723au driver. As the Realtek 8xxx chips are very similar in
++ * their programming interface, I have started adding support for
++ * additional 8xxx chips like the 8192cu, 8188cus, etc.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/errno.h>
++#include <linux/slab.h>
++#include <linux/module.h>
++#include <linux/spinlock.h>
++#include <linux/list.h>
++#include <linux/usb.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/wireless.h>
++#include <linux/firmware.h>
++#include <linux/moduleparam.h>
++#include <net/mac80211.h>
++#include "rtl8xxxu.h"
++#include "rtl8xxxu_regs.h"
++
++static int rtl8188eu_parse_efuse(struct rtl8xxxu_priv *priv)
++{
++ return 0;
++}
++
++static int rtl8188eu_load_firmware(struct rtl8xxxu_priv *priv)
++{
++ char *fw_name;
++ int ret;
++
++ fw_name = "rtlwifi/rtl8188eufw.bin";
++
++ ret = rtl8xxxu_load_firmware(priv, fw_name);
++
++ return -EINVAL;
++ return ret;
++}
++
++struct rtl8xxxu_fileops rtl8188eu_fops = {
++ .parse_efuse = rtl8188eu_parse_efuse,
++ .load_firmware = rtl8188eu_load_firmware,
++ .reset_8051 = rtl8xxxu_reset_8051,
++};
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -54,6 +54,7 @@ MODULE_LICENSE("GPL");
+ MODULE_FIRMWARE("rtlwifi/rtl8723aufw_A.bin");
+ MODULE_FIRMWARE("rtlwifi/rtl8723aufw_B.bin");
+ MODULE_FIRMWARE("rtlwifi/rtl8723aufw_B_NoBT.bin");
++MODULE_FIRMWARE("rtlwifi/rtl8188eufw.bin");
+ MODULE_FIRMWARE("rtlwifi/rtl8192cufw_A.bin");
+ MODULE_FIRMWARE("rtlwifi/rtl8192cufw_B.bin");
+ MODULE_FIRMWARE("rtlwifi/rtl8192cufw_TMSC.bin");
+@@ -6154,6 +6155,8 @@ static struct usb_device_id dev_table[]
+ {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0xb720, 0xff, 0xff, 0xff),
+ .driver_info = (unsigned long)&rtl8723bu_fops},
+ #ifdef CPTCFG_RTL8XXXU_UNTESTED
++{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8179, 0xff, 0xff, 0xff),
++ .driver_info = (unsigned long)&rtl8188eu_fops},
+ /* Still supported by rtlwifi */
+ {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8176, 0xff, 0xff, 0xff),
+ .driver_info = (unsigned long)&rtl8192cu_fops},
--- /dev/null
+From 0acca96b150f2ebd6883689ddfe62babea1a0fc1 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Mon, 27 Jun 2016 15:19:04 -0400
+Subject: [PATCH] rtl8xxxu: Add initial code to part 8188eu efuse
+
+This obtains the MAC address, but work is still needed to handle TX
+power settings.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 40 ++++++++++++++++++++++
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 34 ++++++++++++++++++
+ 2 files changed, 74 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+@@ -871,6 +871,45 @@ struct rtl8192eu_efuse {
+ u8 res14[0xc3];
+ };
+
++struct rtl8188eu_efuse {
++ __le16 rtl_id;
++ u8 res0[0x0e];
++ u8 cck_tx_power_index_A[3]; /* 0x10 */
++ u8 cck_tx_power_index_B[3];
++ u8 ht40_1s_tx_power_index_A[3]; /* 0x16 */
++ u8 ht40_1s_tx_power_index_B[3];
++ u8 res1[0x9c];
++ u8 channel_plan; /* 0xb8 */
++ u8 xtal_k;
++ u8 thermal_meter;
++ u8 iqk_lck;
++ u8 res2[5];
++ u8 rf_board_option;
++ u8 rf_feature_option;
++ u8 rf_bt_setting;
++ u8 eeprom_version;
++ u8 eeprom_customer_id;
++ u8 res3[3];
++ u8 rf_antenna_option; /* 0xc9 */
++ u8 res4[6];
++ u8 vid; /* 0xd0 */
++ u8 res5[1];
++ u8 pid; /* 0xd2 */
++ u8 res6[1];
++ u8 usb_optional_function;
++ u8 res7[2];
++ u8 mac_addr[ETH_ALEN]; /* 0xd7 */
++ u8 res8[2];
++ u8 vendor_name[7];
++ u8 res9[2];
++ u8 device_name[0x0b]; /* 0xe8 */
++ u8 res10[2];
++ u8 serial[0x0b]; /* 0xf5 */
++ u8 res11[0x30];
++ u8 unknown[0x0d]; /* 0x130 */
++ u8 res12[0xc3];
++};
++
+ struct rtl8xxxu_reg8val {
+ u16 reg;
+ u8 val;
+@@ -1289,6 +1328,7 @@ struct rtl8xxxu_priv {
+ struct rtl8723bu_efuse efuse8723bu;
+ struct rtl8192cu_efuse efuse8192;
+ struct rtl8192eu_efuse efuse8192eu;
++ struct rtl8188eu_efuse efuse8188eu;
+ } efuse_wifi;
+ u32 adda_backup[RTL8XXXU_ADDA_REGS];
+ u32 mac_backup[RTL8XXXU_MAC_REGS];
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -42,6 +42,40 @@
+
+ static int rtl8188eu_parse_efuse(struct rtl8xxxu_priv *priv)
+ {
++ struct rtl8188eu_efuse *efuse = &priv->efuse_wifi.efuse8188eu;
++ int i;
++
++ if (efuse->rtl_id != cpu_to_le16(0x8129))
++ return -EINVAL;
++
++ ether_addr_copy(priv->mac_addr, efuse->mac_addr);
++
++ memcpy(priv->cck_tx_power_index_A, efuse->cck_tx_power_index_A,
++ sizeof(efuse->cck_tx_power_index_A));
++ memcpy(priv->cck_tx_power_index_B, efuse->cck_tx_power_index_B,
++ sizeof(efuse->cck_tx_power_index_B));
++
++ memcpy(priv->ht40_1s_tx_power_index_A,
++ priv->efuse_wifi.efuse8188eu.ht40_1s_tx_power_index_A,
++ sizeof(priv->ht40_1s_tx_power_index_A));
++ memcpy(priv->ht40_1s_tx_power_index_B,
++ priv->efuse_wifi.efuse8188eu.ht40_1s_tx_power_index_B,
++ sizeof(priv->ht40_1s_tx_power_index_B));
++
++ dev_info(&priv->udev->dev, "Vendor: %.7s\n", efuse->vendor_name);
++ dev_info(&priv->udev->dev, "Product: %.11s\n", efuse->device_name);
++ dev_info(&priv->udev->dev, "Serial: %.11s\n", efuse->serial);
++
++ if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) {
++ unsigned char *raw = priv->efuse_wifi.raw;
++
++ dev_info(&priv->udev->dev,
++ "%s: dumping efuse (0x%02zx bytes):\n",
++ __func__, sizeof(struct rtl8188eu_efuse));
++ for (i = 0; i < sizeof(struct rtl8188eu_efuse); i += 8)
++ dev_info(&priv->udev->dev, "%02x: %8ph\n", i, &raw[i]);
++ }
++
+ return 0;
+ }
+
--- /dev/null
+From 27f6f980c393532dd0145314e8403fd9c1b680b7 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Mon, 27 Jun 2016 15:34:00 -0400
+Subject: [PATCH] rtl8xxxu: Detect 8188eu parts correctly
+
+8188 parts with chip_cut >= 2 are assumed to be 8188eu.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 22 +++++++++++++++-------
+ 1 file changed, 15 insertions(+), 7 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -1683,13 +1683,21 @@ static int rtl8xxxu_identify_chip(struct
+ }
+ priv->has_wifi = 1;
+ } else {
+- sprintf(priv->chip_name, "8188CU");
+- priv->rf_paths = 1;
+- priv->rx_paths = 1;
+- priv->tx_paths = 1;
+- priv->rtl_chip = RTL8188C;
+- priv->usb_interrupts = 1;
+- priv->has_wifi = 1;
++ if (priv->chip_cut >= 2) {
++ sprintf(priv->chip_name, "8188EU");
++ priv->rf_paths = 1;
++ priv->rx_paths = 1;
++ priv->tx_paths = 1;
++ priv->rtl_chip = RTL8188E;
++ } else {
++ sprintf(priv->chip_name, "8188CU");
++ priv->rf_paths = 1;
++ priv->rx_paths = 1;
++ priv->tx_paths = 1;
++ priv->rtl_chip = RTL8188C;
++ priv->usb_interrupts = 1;
++ priv->has_wifi = 1;
++ }
+ }
+
+ switch (priv->rtl_chip) {
--- /dev/null
+From 7016570c33d1f135f60b38461a3b7ed161911157 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Mon, 27 Jun 2016 17:08:30 -0400
+Subject: [PATCH] rtl8xxxu: First stab at rtl8188e_power_on()
+
+Code based on code from Andrea Merello.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 79 ++++++++++++++++++++++
+ 1 file changed, 79 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -92,8 +92,87 @@ static int rtl8188eu_load_firmware(struc
+ return ret;
+ }
+
++static int rtl8188e_emu_to_active(struct rtl8xxxu_priv *priv)
++{
++ u8 val8;
++ u32 val32;
++ u16 val16;
++ int count, ret = 0;
++
++ /* wait till 0x04[17] = 1 power ready*/
++ for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
++ val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
++ if (val32 & BIT(17))
++ break;
++
++ udelay(10);
++ }
++
++ if (!count) {
++ ret = -EBUSY;
++ goto exit;
++ }
++
++ /* reset baseband */
++ val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
++ val8 &= ~(SYS_FUNC_BBRSTB | SYS_FUNC_BB_GLB_RSTN);
++ rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
++
++ /*0x24[23] = 2b'01 schmit trigger */
++ val32 = rtl8xxxu_read32(priv, REG_AFE_XTAL_CTRL);
++ val32 |= BIT(23);
++ rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, val32);
++
++ /* 0x04[15] = 0 disable HWPDN (control by DRV)*/
++ val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO);
++ val16 &= ~APS_FSMCO_HW_POWERDOWN;
++ rtl8xxxu_write16(priv, REG_APS_FSMCO, val16);
++
++ /*0x04[12:11] = 2b'00 disable WL suspend*/
++ val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO);
++ val16 &= ~(APS_FSMCO_HW_SUSPEND | APS_FSMCO_PCIE);
++ rtl8xxxu_write16(priv, REG_APS_FSMCO, val16);
++
++ /* set, then poll until 0 */
++ val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
++ val32 |= APS_FSMCO_MAC_ENABLE;
++ rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
++
++ for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
++ val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
++ if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) {
++ ret = 0;
++ break;
++ }
++ udelay(10);
++ }
++
++ if (!count) {
++ ret = -EBUSY;
++ goto exit;
++ }
++
++ /* LDO normal mode*/
++ val8 = rtl8xxxu_read8(priv, REG_LPLDO_CTRL);
++ val8 &= ~BIT(4);
++ rtl8xxxu_write8(priv, REG_LPLDO_CTRL, val8);
++
++exit:
++ return ret;
++}
++
++static int rtl8188eu_power_on(struct rtl8xxxu_priv *priv)
++{
++ int ret;
++
++ ret = rtl8188e_emu_to_active(priv);
++
++ return ret;
++}
++
+ struct rtl8xxxu_fileops rtl8188eu_fops = {
+ .parse_efuse = rtl8188eu_parse_efuse,
+ .load_firmware = rtl8188eu_load_firmware,
++ .power_on = rtl8188eu_power_on,
+ .reset_8051 = rtl8xxxu_reset_8051,
+ };
--- /dev/null
+From d4c94e8fc13fdc241b3070476736eefe12726553 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 29 Jun 2016 10:24:39 -0400
+Subject: [PATCH] rtl8xxxu: 8188e - bail if rtl8188eu_emu_to_active() fails
+
+If emu_to_active() fails, don't try to enable anything else.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -166,7 +166,10 @@ static int rtl8188eu_power_on(struct rtl
+ int ret;
+
+ ret = rtl8188e_emu_to_active(priv);
++ if (ret)
++ goto exit;
+
++exit:
+ return ret;
+ }
+
--- /dev/null
+From f24a42f020ff56f587e8c66363af2d7e3ca90790 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 29 Jun 2016 10:38:52 -0400
+Subject: [PATCH] rtl8xxxu: Add rtl8188e_disabled_to_emu()
+
+This sequence is found in the vendor driver, but never actually
+called. It's unclear if we need it.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 11 +++++++++++
+ 1 file changed, 11 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -92,6 +92,15 @@ static int rtl8188eu_load_firmware(struc
+ return ret;
+ }
+
++static void rtl8188e_disabled_to_emu(struct rtl8xxxu_priv *priv)
++{
++ u16 val16;
++
++ val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO);
++ val16 &= ~(APS_FSMCO_PFM_WOWL | APS_FSMCO_ENABLE_POWERDOWN);
++ rtl8xxxu_write16(priv, REG_APS_FSMCO, val16);
++}
++
+ static int rtl8188e_emu_to_active(struct rtl8xxxu_priv *priv)
+ {
+ u8 val8;
+@@ -165,6 +174,8 @@ static int rtl8188eu_power_on(struct rtl
+ {
+ int ret;
+
++ rtl8188e_disabled_to_emu(priv);
++
+ ret = rtl8188e_emu_to_active(priv);
+ if (ret)
+ goto exit;
--- /dev/null
+From 2eaadaf2f65a2856f3e9d4522d582eb2ce6800ec Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 29 Jun 2016 11:07:13 -0400
+Subject: [PATCH] rtl8xxxu: 8188e: Enable scheduler
+
+This enables the schduler, DMA, etc, except for MAC RX/TX which has to
+be set after REG_TRXFF_BNDY due to a hardware bug in the 8188e
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 16 ++++++++++++++++
+ 1 file changed, 16 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -172,6 +172,7 @@ exit:
+
+ static int rtl8188eu_power_on(struct rtl8xxxu_priv *priv)
+ {
++ u16 val16;
+ int ret;
+
+ rtl8188e_disabled_to_emu(priv);
+@@ -180,6 +181,21 @@ static int rtl8188eu_power_on(struct rtl
+ if (ret)
+ goto exit;
+
++ /*
++ * Enable MAC DMA/WMAC/SCHEDULE/SEC block
++ * Set CR bit10 to enable 32k calibration.
++ * We do not set CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE here
++ * due to a hardware bug in the 88E, requiring those to be
++ * set after REG_TRXFF_BNDY is set. If not the RXFF bundary
++ * will get set to a larger buffer size than the real buffer
++ * size.
++ */
++ val16 = (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE |
++ CR_TXDMA_ENABLE | CR_RXDMA_ENABLE |
++ CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE |
++ CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE);
++ rtl8xxxu_write16(priv, REG_CR, val16);
++
+ exit:
+ return ret;
+ }
--- /dev/null
+From 281b44d1c35792946e2a2373c60e543cd5d71c03 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 29 Jun 2016 11:47:10 -0400
+Subject: [PATCH] rtl8xxxu: Add rtl8188e_usb_quirk() for enabling MAC TX/RX
+
+Due to a bug in the 8188e chips, this has to be done after setting
+REG_TRXFF_BNDY.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 15 +++++++++++++++
+ 1 file changed, 15 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -200,9 +200,24 @@ exit:
+ return ret;
+ }
+
++static void rtl8188e_usb_quirks(struct rtl8xxxu_priv *priv)
++{
++ u16 val16;
++
++ /*
++ * Technically this is not a USB quirk, but a chip quirk.
++ * This has to be done after REG_TRXFF_BNDY is set, see
++ * rtl8188eu_power_on() for details.
++ */
++ val16 = rtl8xxxu_read16(priv, REG_CR);
++ val16 |= (CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE);
++ rtl8xxxu_write16(priv, REG_CR, val16);
++}
++
+ struct rtl8xxxu_fileops rtl8188eu_fops = {
+ .parse_efuse = rtl8188eu_parse_efuse,
+ .load_firmware = rtl8188eu_load_firmware,
+ .power_on = rtl8188eu_power_on,
+ .reset_8051 = rtl8xxxu_reset_8051,
++ .usb_quirks = rtl8188e_usb_quirks,
+ };
--- /dev/null
+From 19a9f0c2c5912dc0eb9c1d7a04808509ac3a99a5 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 29 Jun 2016 11:53:31 -0400
+Subject: [PATCH] rtl8xxxu: 8188e add REG_TXDMA_OFFSET_CHK quirk
+
+Enable quirk allowing TX DMA to drop redundant data of packet. This is
+the same quirk enabled on gen2 parts.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -203,6 +203,7 @@ exit:
+ static void rtl8188e_usb_quirks(struct rtl8xxxu_priv *priv)
+ {
+ u16 val16;
++ u32 val32;
+
+ /*
+ * Technically this is not a USB quirk, but a chip quirk.
+@@ -212,6 +213,10 @@ static void rtl8188e_usb_quirks(struct r
+ val16 = rtl8xxxu_read16(priv, REG_CR);
+ val16 |= (CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE);
+ rtl8xxxu_write16(priv, REG_CR, val16);
++
++ val32 = rtl8xxxu_read32(priv, REG_TXDMA_OFFSET_CHK);
++ val32 |= TXDMA_OFFSET_DROP_DATA_EN;
++ rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, val32);
+ }
+
+ struct rtl8xxxu_fileops rtl8188eu_fops = {
--- /dev/null
+From 60f7f109456f2bcdd69504bdf63c55e57ae0c64b Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 29 Jun 2016 12:02:18 -0400
+Subject: [PATCH] rtl8xxxu: Add reserved page init parameters for 8188e
+
+Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 6 ++++++
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 4 ++++
+ 2 files changed, 10 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+@@ -42,6 +42,7 @@
+ #define REALTEK_USB_CMD_IDX 0x00
+
+ #define TX_TOTAL_PAGE_NUM 0xf8
++#define TX_TOTAL_PAGE_NUM_8188E 0xa8
+ #define TX_TOTAL_PAGE_NUM_8192E 0xf3
+ #define TX_TOTAL_PAGE_NUM_8723B 0xf7
+ /* (HPQ + LPQ + NPQ + PUBQ) = TX_TOTAL_PAGE_NUM */
+@@ -50,6 +51,11 @@
+ #define TX_PAGE_NUM_LO_PQ 0x02
+ #define TX_PAGE_NUM_NORM_PQ 0x02
+
++#define TX_PAGE_NUM_PUBQ_8188E 0x47
++#define TX_PAGE_NUM_HI_PQ_8188E 0x29
++#define TX_PAGE_NUM_LO_PQ_8188E 0x1c
++#define TX_PAGE_NUM_NORM_PQ_8188E 0x1c
++
+ #define TX_PAGE_NUM_PUBQ_8192E 0xe7
+ #define TX_PAGE_NUM_HI_PQ_8192E 0x08
+ #define TX_PAGE_NUM_LO_PQ_8192E 0x0c
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -225,4 +225,8 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .power_on = rtl8188eu_power_on,
+ .reset_8051 = rtl8xxxu_reset_8051,
+ .usb_quirks = rtl8188e_usb_quirks,
++ .total_page_num = TX_TOTAL_PAGE_NUM_8188E,
++ .page_num_hi = TX_PAGE_NUM_HI_PQ_8188E,
++ .page_num_lo = TX_PAGE_NUM_LO_PQ_8188E,
++ .page_num_norm = TX_PAGE_NUM_NORM_PQ_8188E,
+ };
--- /dev/null
+From 5bbaf33b2500b9f1ca1137663924a722e00aad57 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 29 Jun 2016 12:08:31 -0400
+Subject: [PATCH] rtl8xxxu: Add trxff_boundary for 8188e
+
+The 8188e presumably has a 10K buffer, but leave space for TX report
+or WOL pattern.
+
+Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -225,6 +225,11 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .power_on = rtl8188eu_power_on,
+ .reset_8051 = rtl8xxxu_reset_8051,
+ .usb_quirks = rtl8188e_usb_quirks,
++ /*
++ * Use 9K for 8188e normal chip
++ * Max RX buffer = 10K - max(TxReportSize(64*8), WOLPattern(16*24))
++ */
++ .trxff_boundary = 0x23ff,
+ .total_page_num = TX_TOTAL_PAGE_NUM_8188E,
+ .page_num_hi = TX_PAGE_NUM_HI_PQ_8188E,
+ .page_num_lo = TX_PAGE_NUM_LO_PQ_8188E,
--- /dev/null
+From f8f72624491a011686c3ddc213c4eef6bac95665 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 29 Jun 2016 15:03:54 -0400
+Subject: [PATCH] rtl8xxxu: 8188eu specify firmware block size and set
+ power_off function
+
+This uses a conservative firmware block size for now.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -223,8 +223,10 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .parse_efuse = rtl8188eu_parse_efuse,
+ .load_firmware = rtl8188eu_load_firmware,
+ .power_on = rtl8188eu_power_on,
++ .power_off = rtl8xxxu_power_off,
+ .reset_8051 = rtl8xxxu_reset_8051,
+ .usb_quirks = rtl8188e_usb_quirks,
++ .writeN_block_size = 128,
+ /*
+ * Use 9K for 8188e normal chip
+ * Max RX buffer = 10K - max(TxReportSize(64*8), WOLPattern(16*24))
--- /dev/null
+From 3490eb08d944df4605aefae95a8ff46982b29a79 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Tue, 19 Jul 2016 15:04:24 -0400
+Subject: [PATCH] rtl8xxxu: Add 8188e mac init table
+
+This table was pulled from the vendor driver.
+
+Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 28 ++++++++++++++++++++++
+ 1 file changed, 28 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -40,6 +40,33 @@
+ #include "rtl8xxxu.h"
+ #include "rtl8xxxu_regs.h"
+
++static struct rtl8xxxu_reg8val rtl8188e_mac_init_table[] = {
++ {0x026, 0x41}, {0x027, 0x35}, {0x428, 0x0a}, {0x429, 0x10},
++ {0x430, 0x00}, {0x431, 0x01}, {0x432, 0x02}, {0x433, 0x04},
++ {0x434, 0x05}, {0x435, 0x06}, {0x436, 0x07}, {0x437, 0x08},
++ {0x438, 0x00}, {0x439, 0x00}, {0x43a, 0x01}, {0x43b, 0x02},
++ {0x43c, 0x04}, {0x43d, 0x05}, {0x43e, 0x06}, {0x43f, 0x07},
++ {0x440, 0x5d}, {0x441, 0x01}, {0x442, 0x00}, {0x444, 0x15},
++ {0x445, 0xf0}, {0x446, 0x0f}, {0x447, 0x00}, {0x458, 0x41},
++ {0x459, 0xa8}, {0x45a, 0x72}, {0x45b, 0xb9}, {0x460, 0x66},
++ {0x461, 0x66}, {0x480, 0x08}, {0x4c8, 0xff}, {0x4c9, 0x08},
++ {0x4cc, 0xff}, {0x4cd, 0xff}, {0x4ce, 0x01}, {0x4d3, 0x01},
++ {0x500, 0x26}, {0x501, 0xa2}, {0x502, 0x2f}, {0x503, 0x00},
++ {0x504, 0x28}, {0x505, 0xa3}, {0x506, 0x5e}, {0x507, 0x00},
++ {0x508, 0x2b}, {0x509, 0xa4}, {0x50a, 0x5e}, {0x50b, 0x00},
++ {0x50c, 0x4f}, {0x50d, 0xa4}, {0x50e, 0x00}, {0x50f, 0x00},
++ {0x512, 0x1c}, {0x514, 0x0a}, {0x516, 0x0a}, {0x525, 0x4f},
++ {0x550, 0x10}, {0x551, 0x10}, {0x559, 0x02}, {0x55d, 0xff},
++ {0x605, 0x30}, {0x608, 0x0e}, {0x609, 0x2a}, {0x620, 0xff},
++ {0x621, 0xff}, {0x622, 0xff}, {0x623, 0xff}, {0x624, 0xff},
++ {0x625, 0xff}, {0x626, 0xff}, {0x627, 0xff}, {0x652, 0x20},
++ {0x63c, 0x0a}, {0x63d, 0x0a}, {0x63e, 0x0e}, {0x63f, 0x0e},
++ {0x640, 0x40}, {0x66e, 0x05}, {0x700, 0x21}, {0x701, 0x43},
++ {0x702, 0x65}, {0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43},
++ {0x70a, 0x65}, {0x70b, 0x87},
++ {0xffff, 0xff},
++};
++
+ static int rtl8188eu_parse_efuse(struct rtl8xxxu_priv *priv)
+ {
+ struct rtl8188eu_efuse *efuse = &priv->efuse_wifi.efuse8188eu;
+@@ -232,6 +259,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ * Max RX buffer = 10K - max(TxReportSize(64*8), WOLPattern(16*24))
+ */
+ .trxff_boundary = 0x23ff,
++ .mactable = rtl8188e_mac_init_table,
+ .total_page_num = TX_TOTAL_PAGE_NUM_8188E,
+ .page_num_hi = TX_PAGE_NUM_HI_PQ_8188E,
+ .page_num_lo = TX_PAGE_NUM_LO_PQ_8188E,
--- /dev/null
+From 08e1167540ad5de6fdc1814fcfbce545b4c10c41 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Tue, 19 Jul 2016 16:19:30 -0400
+Subject: [PATCH] rtl8xxxu: Implement rtl8188eu_init_phy_bb()
+
+This includes adding rtl8188eu_phy_init_table rtl8188e_agc_table, both
+extracted from the vendor driver.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 202 +++++++++++++++++++++
+ 1 file changed, 202 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -67,6 +67,174 @@ static struct rtl8xxxu_reg8val rtl8188e_
+ {0xffff, 0xff},
+ };
+
++static struct rtl8xxxu_reg32val rtl8188eu_phy_init_table[] = {
++ {0x800, 0x80040000}, {0x804, 0x00000003},
++ {0x808, 0x0000fc00}, {0x80c, 0x0000000a},
++ {0x810, 0x10001331}, {0x814, 0x020c3d10},
++ {0x818, 0x02200385}, {0x81c, 0x00000000},
++ {0x820, 0x01000100}, {0x824, 0x00390204},
++ {0x828, 0x00000000}, {0x82c, 0x00000000},
++ {0x830, 0x00000000}, {0x834, 0x00000000},
++ {0x838, 0x00000000}, {0x83c, 0x00000000},
++ {0x840, 0x00010000}, {0x844, 0x00000000},
++ {0x848, 0x00000000}, {0x84c, 0x00000000},
++ {0x850, 0x00000000}, {0x854, 0x00000000},
++ {0x858, 0x569a11a9}, {0x85c, 0x01000014},
++ {0x860, 0x66f60110}, {0x864, 0x061f0649},
++ {0x868, 0x00000000}, {0x86c, 0x27272700},
++ {0x870, 0x07000760}, {0x874, 0x25004000},
++ {0x878, 0x00000808}, {0x87c, 0x00000000},
++ {0x880, 0xb0000c1c}, {0x884, 0x00000001},
++ {0x888, 0x00000000}, {0x88c, 0xccc000c0},
++ {0x890, 0x00000800}, {0x894, 0xfffffffe},
++ {0x898, 0x40302010}, {0x89c, 0x00706050},
++ {0x900, 0x00000000}, {0x904, 0x00000023},
++ {0x908, 0x00000000}, {0x90c, 0x81121111},
++ {0x910, 0x00000002}, {0x914, 0x00000201},
++ {0xa00, 0x00d047c8}, {0xa04, 0x80ff000c},
++ {0xa08, 0x8c838300}, {0xa0c, 0x2e7f120f},
++ {0xa10, 0x9500bb78}, {0xa14, 0x1114d028},
++ {0xa18, 0x00881117}, {0xa1c, 0x89140f00},
++ {0xa20, 0x1a1b0000}, {0xa24, 0x090e1317},
++ {0xa28, 0x00000204}, {0xa2c, 0x00d30000},
++ {0xa70, 0x101fbf00}, {0xa74, 0x00000007},
++ {0xa78, 0x00000900}, {0xa7c, 0x225b0606},
++ {0xa80, 0x218075b1}, {0xb2c, 0x80000000},
++ {0xc00, 0x48071d40}, {0xc04, 0x03a05611},
++ {0xc08, 0x000000e4}, {0xc0c, 0x6c6c6c6c},
++ {0xc10, 0x08800000}, {0xc14, 0x40000100},
++ {0xc18, 0x08800000}, {0xc1c, 0x40000100},
++ {0xc20, 0x00000000}, {0xc24, 0x00000000},
++ {0xc28, 0x00000000}, {0xc2c, 0x00000000},
++ {0xc30, 0x69e9ac47}, {0xc34, 0x469652af},
++ {0xc38, 0x49795994}, {0xc3c, 0x0a97971c},
++ {0xc40, 0x1f7c403f}, {0xc44, 0x000100b7},
++ {0xc48, 0xec020107}, {0xc4c, 0x007f037f},
++ {0xc50, 0x69553420}, {0xc54, 0x43bc0094},
++ {0xc58, 0x00013169}, {0xc5c, 0x00250492},
++ {0xc60, 0x00000000}, {0xc64, 0x7112848b},
++ {0xc68, 0x47c00bff}, {0xc6c, 0x00000036},
++ {0xc70, 0x2c7f000d}, {0xc74, 0x020610db},
++ {0xc78, 0x0000001f}, {0xc7c, 0x00b91612},
++ {0xc80, 0x390000e4}, {0xc84, 0x20f60000},
++ {0xc88, 0x40000100}, {0xc8c, 0x20200000},
++ {0xc90, 0x00091521}, {0xc94, 0x00000000},
++ {0xc98, 0x00121820}, {0xc9c, 0x00007f7f},
++ {0xca0, 0x00000000}, {0xca4, 0x000300a0},
++ {0xca8, 0x00000000}, {0xcac, 0x00000000},
++ {0xcb0, 0x00000000}, {0xcb4, 0x00000000},
++ {0xcb8, 0x00000000}, {0xcbc, 0x28000000},
++ {0xcc0, 0x00000000}, {0xcc4, 0x00000000},
++ {0xcc8, 0x00000000}, {0xccc, 0x00000000},
++ {0xcd0, 0x00000000}, {0xcd4, 0x00000000},
++ {0xcd8, 0x64b22427}, {0xcdc, 0x00766932},
++ {0xce0, 0x00222222}, {0xce4, 0x00000000},
++ {0xce8, 0x37644302}, {0xcec, 0x2f97d40c},
++ {0xd00, 0x00000740}, {0xd04, 0x00020401},
++ {0xd08, 0x0000907f}, {0xd0c, 0x20010201},
++ {0xd10, 0xa0633333}, {0xd14, 0x3333bc43},
++ {0xd18, 0x7a8f5b6f}, {0xd2c, 0xcc979975},
++ {0xd30, 0x00000000}, {0xd34, 0x80608000},
++ {0xd38, 0x00000000}, {0xd3c, 0x00127353},
++ {0xd40, 0x00000000}, {0xd44, 0x00000000},
++ {0xd48, 0x00000000}, {0xd4c, 0x00000000},
++ {0xd50, 0x6437140a}, {0xd54, 0x00000000},
++ {0xd58, 0x00000282}, {0xd5c, 0x30032064},
++ {0xd60, 0x4653de68}, {0xd64, 0x04518a3c},
++ {0xd68, 0x00002101}, {0xd6c, 0x2a201c16},
++ {0xd70, 0x1812362e}, {0xd74, 0x322c2220},
++ {0xd78, 0x000e3c24}, {0xe00, 0x2d2d2d2d},
++ {0xe04, 0x2d2d2d2d}, {0xe08, 0x0390272d},
++ {0xe10, 0x2d2d2d2d}, {0xe14, 0x2d2d2d2d},
++ {0xe18, 0x2d2d2d2d}, {0xe1c, 0x2d2d2d2d},
++ {0xe28, 0x00000000}, {0xe30, 0x1000dc1f},
++ {0xe34, 0x10008c1f}, {0xe38, 0x02140102},
++ {0xe3c, 0x681604c2}, {0xe40, 0x01007c00},
++ {0xe44, 0x01004800}, {0xe48, 0xfb000000},
++ {0xe4c, 0x000028d1}, {0xe50, 0x1000dc1f},
++ {0xe54, 0x10008c1f}, {0xe58, 0x02140102},
++ {0xe5c, 0x28160d05}, {0xe60, 0x00000008},
++ {0xe68, 0x001b25a4}, {0xe6c, 0x00c00014},
++ {0xe70, 0x00c00014}, {0xe74, 0x01000014},
++ {0xe78, 0x01000014}, {0xe7c, 0x01000014},
++ {0xe80, 0x01000014}, {0xe84, 0x00c00014},
++ {0xe88, 0x01000014}, {0xe8c, 0x00c00014},
++ {0xed0, 0x00c00014}, {0xed4, 0x00c00014},
++ {0xed8, 0x00c00014}, {0xedc, 0x00000014},
++ {0xee0, 0x00000014}, {0xeec, 0x01c00014},
++ {0xf14, 0x00000003}, {0xf4c, 0x00000000},
++ {0xf00, 0x00000300},
++ {0xffff, 0xffffffff},
++};
++
++static struct rtl8xxxu_reg32val rtl8188e_agc_table[] = {
++ {0xc78, 0xfb000001}, {0xc78, 0xfb010001},
++ {0xc78, 0xfb020001}, {0xc78, 0xfb030001},
++ {0xc78, 0xfb040001}, {0xc78, 0xfb050001},
++ {0xc78, 0xfa060001}, {0xc78, 0xf9070001},
++ {0xc78, 0xf8080001}, {0xc78, 0xf7090001},
++ {0xc78, 0xf60a0001}, {0xc78, 0xf50b0001},
++ {0xc78, 0xf40c0001}, {0xc78, 0xf30d0001},
++ {0xc78, 0xf20e0001}, {0xc78, 0xf10f0001},
++ {0xc78, 0xf0100001}, {0xc78, 0xef110001},
++ {0xc78, 0xee120001}, {0xc78, 0xed130001},
++ {0xc78, 0xec140001}, {0xc78, 0xeb150001},
++ {0xc78, 0xea160001}, {0xc78, 0xe9170001},
++ {0xc78, 0xe8180001}, {0xc78, 0xe7190001},
++ {0xc78, 0xe61a0001}, {0xc78, 0xe51b0001},
++ {0xc78, 0xe41c0001}, {0xc78, 0xe31d0001},
++ {0xc78, 0xe21e0001}, {0xc78, 0xe11f0001},
++ {0xc78, 0x8a200001}, {0xc78, 0x89210001},
++ {0xc78, 0x88220001}, {0xc78, 0x87230001},
++ {0xc78, 0x86240001}, {0xc78, 0x85250001},
++ {0xc78, 0x84260001}, {0xc78, 0x83270001},
++ {0xc78, 0x82280001}, {0xc78, 0x6b290001},
++ {0xc78, 0x6a2a0001}, {0xc78, 0x692b0001},
++ {0xc78, 0x682c0001}, {0xc78, 0x672d0001},
++ {0xc78, 0x662e0001}, {0xc78, 0x652f0001},
++ {0xc78, 0x64300001}, {0xc78, 0x63310001},
++ {0xc78, 0x62320001}, {0xc78, 0x61330001},
++ {0xc78, 0x46340001}, {0xc78, 0x45350001},
++ {0xc78, 0x44360001}, {0xc78, 0x43370001},
++ {0xc78, 0x42380001}, {0xc78, 0x41390001},
++ {0xc78, 0x403a0001}, {0xc78, 0x403b0001},
++ {0xc78, 0x403c0001}, {0xc78, 0x403d0001},
++ {0xc78, 0x403e0001}, {0xc78, 0x403f0001},
++ {0xc78, 0xfb400001}, {0xc78, 0xfb410001},
++ {0xc78, 0xfb420001}, {0xc78, 0xfb430001},
++ {0xc78, 0xfb440001}, {0xc78, 0xfb450001},
++ {0xc78, 0xfb460001}, {0xc78, 0xfb470001},
++ {0xc78, 0xfb480001}, {0xc78, 0xfa490001},
++ {0xc78, 0xf94a0001}, {0xc78, 0xf84b0001},
++ {0xc78, 0xf74c0001}, {0xc78, 0xf64d0001},
++ {0xc78, 0xf54e0001}, {0xc78, 0xf44f0001},
++ {0xc78, 0xf3500001}, {0xc78, 0xf2510001},
++ {0xc78, 0xf1520001}, {0xc78, 0xf0530001},
++ {0xc78, 0xef540001}, {0xc78, 0xee550001},
++ {0xc78, 0xed560001}, {0xc78, 0xec570001},
++ {0xc78, 0xeb580001}, {0xc78, 0xea590001},
++ {0xc78, 0xe95a0001}, {0xc78, 0xe85b0001},
++ {0xc78, 0xe75c0001}, {0xc78, 0xe65d0001},
++ {0xc78, 0xe55e0001}, {0xc78, 0xe45f0001},
++ {0xc78, 0xe3600001}, {0xc78, 0xe2610001},
++ {0xc78, 0xc3620001}, {0xc78, 0xc2630001},
++ {0xc78, 0xc1640001}, {0xc78, 0x8b650001},
++ {0xc78, 0x8a660001}, {0xc78, 0x89670001},
++ {0xc78, 0x88680001}, {0xc78, 0x87690001},
++ {0xc78, 0x866a0001}, {0xc78, 0x856b0001},
++ {0xc78, 0x846c0001}, {0xc78, 0x676d0001},
++ {0xc78, 0x666e0001}, {0xc78, 0x656f0001},
++ {0xc78, 0x64700001}, {0xc78, 0x63710001},
++ {0xc78, 0x62720001}, {0xc78, 0x61730001},
++ {0xc78, 0x60740001}, {0xc78, 0x46750001},
++ {0xc78, 0x45760001}, {0xc78, 0x44770001},
++ {0xc78, 0x43780001}, {0xc78, 0x42790001},
++ {0xc78, 0x417a0001}, {0xc78, 0x407b0001},
++ {0xc78, 0x407c0001}, {0xc78, 0x407d0001},
++ {0xc78, 0x407e0001}, {0xc78, 0x407f0001},
++ {0xffff, 0xffffffff}
++};
++
+ static int rtl8188eu_parse_efuse(struct rtl8xxxu_priv *priv)
+ {
+ struct rtl8188eu_efuse *efuse = &priv->efuse_wifi.efuse8188eu;
+@@ -89,6 +257,8 @@ static int rtl8188eu_parse_efuse(struct
+ priv->efuse_wifi.efuse8188eu.ht40_1s_tx_power_index_B,
+ sizeof(priv->ht40_1s_tx_power_index_B));
+
++ priv->xtalk = priv->efuse_wifi.efuse8188eu.xtal_k & 0x3f;
++
+ dev_info(&priv->udev->dev, "Vendor: %.7s\n", efuse->vendor_name);
+ dev_info(&priv->udev->dev, "Product: %.11s\n", efuse->device_name);
+ dev_info(&priv->udev->dev, "Serial: %.11s\n", efuse->serial);
+@@ -119,6 +289,37 @@ static int rtl8188eu_load_firmware(struc
+ return ret;
+ }
+
++static void rtl8188eu_init_phy_bb(struct rtl8xxxu_priv *priv)
++{
++ u8 val8;
++ u16 val16;
++ u32 val32;
++
++ val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
++ val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB | SYS_FUNC_DIO_RF;
++ rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
++
++ /*
++ * Per vendor driver, run power sequence before init of RF
++ */
++ val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB;
++ rtl8xxxu_write8(priv, REG_RF_CTRL, val8);
++
++ val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
++ val16 |= (SYS_FUNC_USBA | SYS_FUNC_USBD |
++ SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB);
++ rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
++
++ rtl8xxxu_init_phy_regs(priv, rtl8188eu_phy_init_table);
++ rtl8xxxu_init_phy_regs(priv, rtl8188e_agc_table);
++
++ val32 = rtl8xxxu_read32(priv, REG_AFE_XTAL_CTRL);
++ val8 = priv->xtalk;
++ val32 &= 0xff8007ff;
++ val32 |= ((val8 | (val8 << 6)) << 11);
++ rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, val32);
++}
++
+ static void rtl8188e_disabled_to_emu(struct rtl8xxxu_priv *priv)
+ {
+ u16 val16;
+@@ -252,6 +453,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .power_on = rtl8188eu_power_on,
+ .power_off = rtl8xxxu_power_off,
+ .reset_8051 = rtl8xxxu_reset_8051,
++ .init_phy_bb = rtl8188eu_init_phy_bb,
+ .usb_quirks = rtl8188e_usb_quirks,
+ .writeN_block_size = 128,
+ /*
--- /dev/null
+From d538ef459e4d8edea4968a2c0012fbab5d8c70f5 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Tue, 19 Jul 2016 17:12:42 -0400
+Subject: [PATCH] rtl8xxxu: Implement rtl8188eu_init_phy_rf()
+
+Include the table rtl8188eu_radioa_init_table derived from vendor
+driver. The vendor table relies on a hack setting RF6052_REG_RCK1 +
+RF6052_REG_RCK2 with delays. This workaround is open coded here
+instead of modifying the table parsing code.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 65 ++++++++++++++++++++++
+ 1 file changed, 65 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -235,6 +235,54 @@ static struct rtl8xxxu_reg32val rtl8188e
+ {0xffff, 0xffffffff}
+ };
+
++static struct rtl8xxxu_rfregval rtl8188eu_radioa_init_table[] = {
++ {0x00, 0x00030000}, {0x08, 0x00084000},
++ {0x18, 0x00000407}, {0x19, 0x00000012},
++ {0x1e, 0x00080009}, {0x1f, 0x00000880},
++ {0x2f, 0x0001a060}, {0x3f, 0x00000000},
++ {0x42, 0x000060c0}, {0x57, 0x000d0000},
++ {0x58, 0x000be180}, {0x67, 0x00001552},
++ {0x83, 0x00000000}, {0xb0, 0x000ff8fc},
++ {0xb1, 0x00054400}, {0xb2, 0x000ccc19},
++ {0xb4, 0x00043003}, {0xb6, 0x0004953e},
++ {0xb7, 0x0001c718}, {0xb8, 0x000060ff},
++ {0xb9, 0x00080001}, {0xba, 0x00040000},
++ {0xbb, 0x00000400}, {0xbf, 0x000c0000},
++ {0xc2, 0x00002400}, {0xc3, 0x00000009},
++ {0xc4, 0x00040c91}, {0xc5, 0x00099999},
++ {0xc6, 0x000000a3}, {0xc7, 0x00088820},
++ {0xc8, 0x00076c06}, {0xc9, 0x00000000},
++ {0xca, 0x00080000}, {0xdf, 0x00000180},
++ {0xef, 0x000001a0}, {0x51, 0x0006b27d},
++ {0x52, 0x0007e49d}, /* Set to 0x0007e4dd for SDIO */
++ {0x53, 0x00000073}, {0x56, 0x00051ff3},
++ {0x35, 0x00000086}, {0x35, 0x00000186},
++ {0x35, 0x00000286}, {0x36, 0x00001c25},
++ {0x36, 0x00009c25}, {0x36, 0x00011c25},
++ {0x36, 0x00019c25}, {0xb6, 0x00048538},
++ {0x18, 0x00000c07}, {0x5a, 0x0004bd00},
++ {0x19, 0x000739d0}, {0x34, 0x0000adf3},
++ {0x34, 0x00009df0}, {0x34, 0x00008ded},
++ {0x34, 0x00007dea}, {0x34, 0x00006de7},
++ {0x34, 0x000054ee}, {0x34, 0x000044eb},
++ {0x34, 0x000034e8}, {0x34, 0x0000246b},
++ {0x34, 0x00001468}, {0x34, 0x0000006d},
++ {0x00, 0x00030159}, {0x84, 0x00068200},
++ {0x86, 0x000000ce}, {0x87, 0x00048a00},
++ {0x8e, 0x00065540}, {0x8f, 0x00088000},
++ {0xef, 0x000020a0}, {0x3b, 0x000f02b0},
++ {0x3b, 0x000ef7b0}, {0x3b, 0x000d4fb0},
++ {0x3b, 0x000cf060}, {0x3b, 0x000b0090},
++ {0x3b, 0x000a0080}, {0x3b, 0x00090080},
++ {0x3b, 0x0008f780}, {0x3b, 0x000722b0},
++ {0x3b, 0x0006f7b0}, {0x3b, 0x00054fb0},
++ {0x3b, 0x0004f060}, {0x3b, 0x00030090},
++ {0x3b, 0x00020080}, {0x3b, 0x00010080},
++ {0x3b, 0x0000f780}, {0xef, 0x000000a0},
++ {0x00, 0x00010159}, {0x18, 0x0000f407},
++ {0xff, 0xffffffff}
++};
++
+ static int rtl8188eu_parse_efuse(struct rtl8xxxu_priv *priv)
+ {
+ struct rtl8188eu_efuse *efuse = &priv->efuse_wifi.efuse8188eu;
+@@ -320,6 +368,22 @@ static void rtl8188eu_init_phy_bb(struct
+ rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, val32);
+ }
+
++static int rtl8188eu_init_phy_rf(struct rtl8xxxu_priv *priv)
++{
++ int ret;
++
++ ret = rtl8xxxu_init_phy_rf(priv, rtl8188eu_radioa_init_table, RF_A);
++
++ msleep(100);
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK2, 0x80003);
++ msleep(100);
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK1, 0x00001);
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK2, 0x80000);
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x33e60);
++
++ return ret;
++}
++
+ static void rtl8188e_disabled_to_emu(struct rtl8xxxu_priv *priv)
+ {
+ u16 val16;
+@@ -454,6 +518,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .power_off = rtl8xxxu_power_off,
+ .reset_8051 = rtl8xxxu_reset_8051,
+ .init_phy_bb = rtl8188eu_init_phy_bb,
++ .init_phy_rf = rtl8188eu_init_phy_rf,
+ .usb_quirks = rtl8188e_usb_quirks,
+ .writeN_block_size = 128,
+ /*
--- /dev/null
+From ada071c5bd6d58ca46d71956456d339b64a48551 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Tue, 19 Jul 2016 17:27:48 -0400
+Subject: [PATCH] rtl8xxxu: Use auto LLT init for 8188e
+
+The vendor driver uses IOL to init the LLT table for 8188e. Since we
+are trying to avoid dealing with IOL for now, gamble that auto LLT
+will work.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -517,6 +517,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .power_on = rtl8188eu_power_on,
+ .power_off = rtl8xxxu_power_off,
+ .reset_8051 = rtl8xxxu_reset_8051,
++ .llt_init = rtl8xxxu_auto_llt_table,
+ .init_phy_bb = rtl8188eu_init_phy_bb,
+ .init_phy_rf = rtl8188eu_init_phy_rf,
+ .usb_quirks = rtl8188e_usb_quirks,
--- /dev/null
+From 1c55be6db2ed7e19a24ece3c1eea0e7a14ea9a6a Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 20 Jul 2016 14:32:46 -0400
+Subject: [PATCH] rtl8xxxu: Do not set REG_FPGA0_TX_INFO on 8188eu
+
+The vendor driver doesn't set this for 8188eu either. It is unclear if
+this is only relevant for gen1 parts.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -3958,7 +3958,8 @@ static int rtl8xxxu_init_device(struct i
+ goto exit;
+
+ /* RFSW Control - clear bit 14 ?? */
+- if (priv->rtl_chip != RTL8723B && priv->rtl_chip != RTL8192E)
++ if (priv->rtl_chip != RTL8723B && priv->rtl_chip != RTL8192E &&
++ priv->rtl_chip != RTL8188E)
+ rtl8xxxu_write32(priv, REG_FPGA0_TX_INFO, 0x00000003);
+
+ val32 = FPGA0_RF_TRSW | FPGA0_RF_TRSWB | FPGA0_RF_ANTSW |
--- /dev/null
+From 66f8eac46264726a71fc264289d8168028db0d32 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 20 Jul 2016 14:38:23 -0400
+Subject: [PATCH] rtl8xxxu: Do not mess with REG_FPGA0_XA_RF_INT_OE either on
+ 8188eu
+
+On older devices the vendor driver hard codes a value into
+REG_FPGA0_XA_RF_INT_OE for antenna selection. This probably shouldn't
+be done in the first place, but more investigation needs to be done to
+figure out how this really works.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -3972,7 +3972,7 @@ static int rtl8xxxu_init_device(struct i
+ rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32);
+
+ /* 0x860[6:5]= 00 - why? - this sets antenna B */
+- if (priv->rtl_chip != RTL8192E)
++ if (priv->rtl_chip != RTL8192E && priv->rtl_chip != RTL8188E)
+ rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, 0x66f60210);
+
+ if (!macpower) {
--- /dev/null
+From ae67e9c34a9ab0624f76401330940b5a4b39fd97 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 20 Jul 2016 15:59:31 -0400
+Subject: [PATCH] rtl8xxxu: Set transfer page size for 8188eu
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -527,6 +527,8 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ * Max RX buffer = 10K - max(TxReportSize(64*8), WOLPattern(16*24))
+ */
+ .trxff_boundary = 0x23ff,
++ .pbp_rx = PBP_PAGE_SIZE_128,
++ .pbp_tx = PBP_PAGE_SIZE_128,
+ .mactable = rtl8188e_mac_init_table,
+ .total_page_num = TX_TOTAL_PAGE_NUM_8188E,
+ .page_num_hi = TX_PAGE_NUM_HI_PQ_8188E,
--- /dev/null
+From d20ce683065f086727704d4ea22073fac6db8f47 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 20 Jul 2016 16:13:06 -0400
+Subject: [PATCH] rtl8xxxu: Enable TX report timer on 8188eu
+
+The 8188eu uses the same TX report timer as found on the 8723b.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -522,6 +522,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .init_phy_rf = rtl8188eu_init_phy_rf,
+ .usb_quirks = rtl8188e_usb_quirks,
+ .writeN_block_size = 128,
++ .has_tx_report = 1,
+ /*
+ * Use 9K for 8188e normal chip
+ * Max RX buffer = 10K - max(TxReportSize(64*8), WOLPattern(16*24))
--- /dev/null
+From 90361ade5a709877dee37f5cb091886117c815f4 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 20 Jul 2016 16:59:18 -0400
+Subject: [PATCH] rtl8xxxu: Setup interrupts for 8188eu
+
+This sets up interrupts for 8188eu, but per vendor driver, it's not
+obvious this is really needed for USB devices.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -4037,6 +4037,15 @@ static int rtl8xxxu_init_device(struct i
+ if (priv->rtl_chip == RTL8192E) {
+ rtl8xxxu_write32(priv, REG_HIMR0, 0x00);
+ rtl8xxxu_write32(priv, REG_HIMR1, 0x00);
++ } else if (priv->rtl_chip == RTL8188E) {
++ rtl8xxxu_write32(priv, REG_HISR0, 0xffffffff);
++ val32 = IMR0_PSTIMEOUT | IMR0_TBDER | IMR0_CPWM | IMR0_CPWM2;
++ rtl8xxxu_write32(priv, REG_HIMR0, val32);
++ val32 = IMR1_TXERR | IMR1_RXERR | IMR1_TXFOVW | IMR1_RXFOVW;
++ rtl8xxxu_write32(priv, REG_HIMR1, val32);
++ val8 = rtl8xxxu_read8(priv, REG_USB_SPECIAL_OPTION);
++ val8 |= USB_SPEC_INT_BULK_SELECT;
++ rtl8xxxu_write8(priv, REG_USB_SPECIAL_OPTION, val8);
+ } else {
+ /*
+ * Enable all interrupts - not obvious USB needs to do this
--- /dev/null
+From f89604d87636dfd156d3ea417fb0af72c4f51e46 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Thu, 21 Jul 2016 14:52:49 -0400
+Subject: [PATCH] rtl8xxxu: Use rxdesc16 for 8188eu
+
+The RX descriptor format looks like the gen1 RX descriptor format, so
+use that for now. On the other hand the TX descriptor format looks
+like a hybrid.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -520,8 +520,10 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .llt_init = rtl8xxxu_auto_llt_table,
+ .init_phy_bb = rtl8188eu_init_phy_bb,
+ .init_phy_rf = rtl8188eu_init_phy_rf,
++ .parse_rx_desc = rtl8xxxu_parse_rxdesc16,
+ .usb_quirks = rtl8188e_usb_quirks,
+ .writeN_block_size = 128,
++ .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16),
+ .has_tx_report = 1,
+ /*
+ * Use 9K for 8188e normal chip
--- /dev/null
+From be3bb0c98c94596874f4261413f7c188f400ac18 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Thu, 21 Jul 2016 15:23:16 -0400
+Subject: [PATCH] rtl8xxxu: 8188eu use same ADDA on parameters as 8723au/8192cu
+
+For ADDA setup the 8188eu looks to match the gen1 parts.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -525,6 +525,10 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .writeN_block_size = 128,
+ .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16),
+ .has_tx_report = 1,
++ .adda_1t_init = 0x0b1b25a0,
++ .adda_1t_path_on = 0x0bdb25a0,
++ .adda_2t_path_on_a = 0x04db25a4,
++ .adda_2t_path_on_b = 0x0b1b25a4,
+ /*
+ * Use 9K for 8188e normal chip
+ * Max RX buffer = 10K - max(TxReportSize(64*8), WOLPattern(16*24))
--- /dev/null
+From 9e90e4617f5e6549825baa88ef4a310f34a5f0bc Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Thu, 21 Jul 2016 17:25:56 -0400
+Subject: [PATCH] rtl8xxxu: Add PHY IQ calibration code for 8188eu
+
+The vendor driver for 8188eu is a bizarre modern style code for path A
+and old-style code for path B. Most likely because the 8188eu is a
+1T1R part which never gets to the path B code.
+
+Eventually we should look into unifying all the IQ calibration code.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 489 +++++++++++++++++++++
+ 1 file changed, 489 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -384,6 +384,494 @@ static int rtl8188eu_init_phy_rf(struct
+ return ret;
+ }
+
++static int rtl8188eu_iqk_path_a(struct rtl8xxxu_priv *priv)
++{
++ u32 reg_eac, reg_e94, reg_e9c;
++ int result = 0;
++
++ /* Path A IQK setting */
++ rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x10008c1c);
++ rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x30008c1c);
++
++ rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x8214032a);
++ rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160000);
++
++ /* LO calibration setting */
++ rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911);
++
++ /* One shot, path A LOK & IQK */
++ rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
++ rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
++
++ mdelay(10);
++
++ /* Check failed */
++ reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
++ reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
++ reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
++
++ if (!(reg_eac & BIT(28)) &&
++ ((reg_e94 & 0x03ff0000) != 0x01420000) &&
++ ((reg_e9c & 0x03ff0000) != 0x00420000))
++ result |= 0x01;
++
++ return result;
++}
++
++static int rtl8188eu_rx_iqk_path_a(struct rtl8xxxu_priv *priv)
++{
++ u32 reg_ea4, reg_eac, reg_e94, reg_e9c, val32;
++ int result = 0;
++
++ /* Leave IQK mode */
++ rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00);
++
++ /* Enable path A PA in TX IQK mode */
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0);
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf117b);
++
++ /* PA/PAD control by 0x56, and set = 0x0 */
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00980);
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x51000);
++
++ /* Enter IQK mode */
++ rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
++
++ /* TX IQK setting */
++ rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
++ rtl8xxxu_write32(priv, REG_RX_IQK, 0x81004800);
++
++ /* path-A IQK setting */
++ rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x10008c1c);
++ rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x30008c1c);
++
++ rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f);
++ rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160000);
++
++ /* LO calibration setting */
++ rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
++
++ /* One shot, path A LOK & IQK */
++ rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
++ rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
++
++ mdelay(10);
++
++ /* Check failed */
++ reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
++ reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
++ reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
++
++ if (!(reg_eac & BIT(28)) &&
++ ((reg_e94 & 0x03ff0000) != 0x01420000) &&
++ ((reg_e9c & 0x03ff0000) != 0x00420000)) {
++ result |= 0x01;
++ } else {
++ /* PA/PAD controlled by 0x0 */
++ rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x180);
++ goto out;
++ }
++
++ val32 = 0x80007c00 |
++ (reg_e94 & 0x03ff0000) | ((reg_e9c >> 16) & 0x03ff);
++ rtl8xxxu_write32(priv, REG_TX_IQK, val32);
++
++ /* Modify RX IQK mode table */
++ rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
++
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0);
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f);
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7ffa);
++
++ /* Enter IQK mode */
++ rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
++
++ /* IQK setting */
++ rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
++
++ /* Path A IQK setting */
++ rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c);
++ rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c);
++
++ rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c05);
++ rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160c1f);
++
++ /* LO calibration setting */
++ rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
++
++ /* One shot, path A LOK & IQK */
++ rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
++ rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
++
++ mdelay(10);
++
++ reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
++ reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2);
++
++ rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x180);
++
++ if (!(reg_eac & BIT(27)) &&
++ ((reg_ea4 & 0x03ff0000) != 0x01320000) &&
++ ((reg_eac & 0x03ff0000) != 0x00360000))
++ result |= 0x02;
++ else
++ dev_warn(&priv->udev->dev, "%s: Path A RX IQK failed!\n",
++ __func__);
++
++out:
++ return result;
++}
++
++static int rtl8188eu_iqk_path_b(struct rtl8xxxu_priv *priv)
++{
++ u32 reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc;
++ int result = 0;
++
++ rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000002);
++ rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000000);
++
++ mdelay(1);
++
++ /* Check failed */
++ reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
++ reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
++ reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
++ reg_ec4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2);
++ reg_ecc = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2);
++
++ if (!(reg_eac & BIT(31)) &&
++ ((reg_eb4 & 0x03ff0000) != 0x01420000) &&
++ ((reg_ebc & 0x03ff0000) != 0x00420000))
++ result |= 0x01;
++ else
++ dev_warn(&priv->udev->dev, "%s: Path B IQK failed!\n",
++ __func__);
++
++ if (!(reg_eac & BIT(30)) &&
++ ((reg_ec4 & 0x03ff0000) != 0x01320000) &&
++ ((reg_ecc & 0x03ff0000) != 0x00360000))
++ result |= 0x01;
++ else
++ dev_warn(&priv->udev->dev, "%s: Path B RX IQK failed!\n",
++ __func__);
++
++ return result;
++}
++
++static void rtl8188eu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
++ int result[][8], int t)
++{
++ struct device *dev = &priv->udev->dev;
++ u32 i, val32;
++ int path_a_ok, path_b_ok;
++ int retry = 2;
++ const u32 adda_regs[RTL8XXXU_ADDA_REGS] = {
++ REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH,
++ REG_RX_WAIT_CCA, REG_TX_CCK_RFON,
++ REG_TX_CCK_BBON, REG_TX_OFDM_RFON,
++ REG_TX_OFDM_BBON, REG_TX_TO_RX,
++ REG_TX_TO_TX, REG_RX_CCK,
++ REG_RX_OFDM, REG_RX_WAIT_RIFS,
++ REG_RX_TO_RX, REG_STANDBY,
++ REG_SLEEP, REG_PMPD_ANAEN
++ };
++ const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = {
++ REG_TXPAUSE, REG_BEACON_CTRL,
++ REG_BEACON_CTRL_1, REG_GPIO_MUXCFG
++ };
++ const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = {
++ REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR,
++ REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B,
++ REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE,
++ REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE
++ };
++
++ /*
++ * Note: IQ calibration must be performed after loading
++ * PHY_REG.txt , and radio_a, radio_b.txt
++ */
++
++ if (t == 0) {
++ /* Save ADDA parameters, turn Path A ADDA on */
++ rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup,
++ RTL8XXXU_ADDA_REGS);
++ rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
++ rtl8xxxu_save_regs(priv, iqk_bb_regs,
++ priv->bb_backup, RTL8XXXU_BB_REGS);
++ }
++
++ rtl8xxxu_path_adda_on(priv, adda_regs, true);
++
++ if (t == 0) {
++ val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM1);
++ if (val32 & FPGA0_HSSI_PARM1_PI)
++ priv->pi_enabled = 1;
++ }
++
++ if (!priv->pi_enabled) {
++ /* Switch BB to PI mode to do IQ Calibration. */
++ rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, 0x01000100);
++ rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, 0x01000100);
++ }
++
++ val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
++ val32 &= ~FPGA_RF_MODE_CCK;
++ rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
++
++ rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600);
++ rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4);
++ rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000);
++
++ if (!priv->no_pape) {
++ val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_SW_CTRL);
++ val32 |= (FPGA0_RF_PAPE |
++ (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT));
++ rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32);
++ }
++
++ val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_RF_INT_OE);
++ val32 &= ~BIT(10);
++ rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, val32);
++ val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_RF_INT_OE);
++ val32 &= ~BIT(10);
++ rtl8xxxu_write32(priv, REG_FPGA0_XB_RF_INT_OE, val32);
++
++ if (priv->tx_paths > 1) {
++ rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00010000);
++ rtl8xxxu_write32(priv, REG_FPGA0_XB_LSSI_PARM, 0x00010000);
++ }
++
++ /* MAC settings */
++ rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup);
++
++ /* Page B init */
++ rtl8xxxu_write32(priv, REG_CONFIG_ANT_A, 0x0f600000);
++
++ if (priv->tx_paths > 1)
++ rtl8xxxu_write32(priv, REG_CONFIG_ANT_B, 0x0f600000);
++
++ /* IQ calibration setting */
++ rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
++ rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
++ rtl8xxxu_write32(priv, REG_RX_IQK, 0x81004800);
++
++ for (i = 0; i < retry; i++) {
++ path_a_ok = rtl8188eu_iqk_path_a(priv);
++ if (path_a_ok == 0x01) {
++ val32 = rtl8xxxu_read32(priv,
++ REG_TX_POWER_BEFORE_IQK_A);
++ result[t][0] = (val32 >> 16) & 0x3ff;
++ val32 = rtl8xxxu_read32(priv,
++ REG_TX_POWER_AFTER_IQK_A);
++ result[t][1] = (val32 >> 16) & 0x3ff;
++ break;
++ }
++ }
++
++ if (!path_a_ok)
++ dev_dbg(dev, "%s: Path A TX IQK failed!\n", __func__);
++
++ for (i = 0; i < retry; i++) {
++ path_a_ok = rtl8188eu_rx_iqk_path_a(priv);
++ if (path_a_ok == 0x03) {
++ val32 = rtl8xxxu_read32(priv,
++ REG_RX_POWER_BEFORE_IQK_A_2);
++ result[t][2] = (val32 >> 16) & 0x3ff;
++ val32 = rtl8xxxu_read32(priv,
++ REG_RX_POWER_AFTER_IQK_A_2);
++ result[t][3] = (val32 >> 16) & 0x3ff;
++
++ break;
++ }
++ }
++
++ if (!path_a_ok)
++ dev_dbg(dev, "%s: Path A RX IQK failed!\n", __func__);
++
++ /*
++ * Path B calibration code in the vendor driver seems to be
++ * old style and not updated for the 8188eu since it's a 1T1R
++ * part. Keeping the code here in sync with the vendor code
++ * to not divert unncessarily, but probably would be good to
++ * look into modernizing all the code including that for the
++ * old gen1 devices
++ */
++ if (priv->tx_paths > 1) {
++ /*
++ * Path A into standby
++ */
++ rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x0);
++ rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00010000);
++ rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
++
++ /* Turn Path B ADDA on */
++ rtl8xxxu_path_adda_on(priv, adda_regs, false);
++
++ for (i = 0; i < retry; i++) {
++ path_b_ok = rtl8188eu_iqk_path_b(priv);
++ if (path_b_ok == 0x03) {
++ val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
++ result[t][4] = (val32 >> 16) & 0x3ff;
++ val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
++ result[t][5] = (val32 >> 16) & 0x3ff;
++ val32 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2);
++ result[t][6] = (val32 >> 16) & 0x3ff;
++ val32 = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2);
++ result[t][7] = (val32 >> 16) & 0x3ff;
++ break;
++ } else if (i == (retry - 1) && path_b_ok == 0x01) {
++ /* TX IQK OK */
++ val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
++ result[t][4] = (val32 >> 16) & 0x3ff;
++ val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
++ result[t][5] = (val32 >> 16) & 0x3ff;
++ }
++ }
++
++ if (!path_b_ok)
++ dev_dbg(dev, "%s: Path B IQK failed!\n", __func__);
++ }
++
++ /* Back to BB mode, load original value */
++ rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0);
++
++ if (t) {
++ if (!priv->pi_enabled) {
++ /*
++ * Switch back BB to SI mode after finishing
++ * IQ Calibration
++ */
++ val32 = 0x01000000;
++ rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, val32);
++ rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, val32);
++ }
++
++ /* Reload ADDA power saving parameters */
++ rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup,
++ RTL8XXXU_ADDA_REGS);
++
++ /* Reload MAC parameters */
++ rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
++
++ /* Reload BB parameters */
++ rtl8xxxu_restore_regs(priv, iqk_bb_regs,
++ priv->bb_backup, RTL8XXXU_BB_REGS);
++
++ /* Restore RX initial gain */
++ rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00032ed3);
++
++ if (priv->tx_paths > 1) {
++ rtl8xxxu_write32(priv, REG_FPGA0_XB_LSSI_PARM,
++ 0x00032ed3);
++ }
++
++ /* Load 0xe30 IQC default value */
++ rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00);
++ rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00);
++ }
++}
++
++static void rtl8188eu_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
++{
++ struct device *dev = &priv->udev->dev;
++ int result[4][8]; /* last is final result */
++ int i, candidate;
++ bool path_a_ok, path_b_ok;
++ u32 reg_e94, reg_e9c, reg_ea4, reg_eac;
++ u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc;
++ bool simu;
++
++ memset(result, 0, sizeof(result));
++ result[3][0] = 0x100;
++ result[3][2] = 0x100;
++ result[3][4] = 0x100;
++ result[3][6] = 0x100;
++
++ candidate = -1;
++
++ path_a_ok = false;
++ path_b_ok = false;
++
++ for (i = 0; i < 3; i++) {
++ rtl8188eu_phy_iqcalibrate(priv, result, i);
++
++ if (i == 1) {
++ simu = rtl8xxxu_gen2_simularity_compare(priv,
++ result, 0, 1);
++ if (simu) {
++ candidate = 0;
++ break;
++ }
++ }
++
++ if (i == 2) {
++ simu = rtl8xxxu_gen2_simularity_compare(priv,
++ result, 0, 2);
++ if (simu) {
++ candidate = 0;
++ break;
++ }
++
++ simu = rtl8xxxu_gen2_simularity_compare(priv,
++ result, 1, 2);
++ if (simu)
++ candidate = 1;
++ else
++ candidate = 3;
++ }
++ }
++
++ for (i = 0; i < 4; i++) {
++ reg_e94 = result[i][0];
++ reg_e9c = result[i][1];
++ reg_ea4 = result[i][2];
++ reg_eb4 = result[i][4];
++ reg_ebc = result[i][5];
++ reg_ec4 = result[i][6];
++ }
++
++ if (candidate >= 0) {
++ reg_e94 = result[candidate][0];
++ priv->rege94 = reg_e94;
++ reg_e9c = result[candidate][1];
++ priv->rege9c = reg_e9c;
++ reg_ea4 = result[candidate][2];
++ reg_eac = result[candidate][3];
++ reg_eb4 = result[candidate][4];
++ priv->regeb4 = reg_eb4;
++ reg_ebc = result[candidate][5];
++ priv->regebc = reg_ebc;
++ reg_ec4 = result[candidate][6];
++ reg_ecc = result[candidate][7];
++ dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate);
++ dev_dbg(dev,
++ "%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x "
++ "ecc=%x\n ", __func__, reg_e94, reg_e9c,
++ reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc);
++ path_a_ok = true;
++ path_b_ok = true;
++ } else {
++ reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100;
++ reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0;
++ }
++
++ if (reg_e94 && candidate >= 0)
++ rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result,
++ candidate, (reg_ea4 == 0));
++
++ if (priv->rf_paths > 1 && reg_eb4)
++ rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result,
++ candidate, (reg_ec4 == 0));
++
++ rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg,
++ priv->bb_recovery_backup, RTL8XXXU_BB_REGS);
++}
++
+ static void rtl8188e_disabled_to_emu(struct rtl8xxxu_priv *priv)
+ {
+ u16 val16;
+@@ -520,6 +1008,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .llt_init = rtl8xxxu_auto_llt_table,
+ .init_phy_bb = rtl8188eu_init_phy_bb,
+ .init_phy_rf = rtl8188eu_init_phy_rf,
++ .phy_iq_calibrate = rtl8188eu_phy_iq_calibrate,
+ .parse_rx_desc = rtl8xxxu_parse_rxdesc16,
+ .usb_quirks = rtl8188e_usb_quirks,
+ .writeN_block_size = 128,
--- /dev/null
+From 720e57cf9ea8c3121063bc2340be536b3260663e Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Fri, 22 Jul 2016 11:20:00 -0400
+Subject: [PATCH] rtl8xxxu: 8188eu uses the gen2 thermal meter
+
+Vendor driver writes thermal meter setup to RF register 0x42, hence
+the gen2 setup. However the driver doesn't do much with it.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -1014,6 +1014,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .writeN_block_size = 128,
+ .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16),
+ .has_tx_report = 1,
++ .gen2_thermal_meter = 1,
+ .adda_1t_init = 0x0b1b25a0,
+ .adda_1t_path_on = 0x0bdb25a0,
+ .adda_2t_path_on_a = 0x04db25a4,
--- /dev/null
+From 95df0a5e0bdb67c6efd14dbccd1eab59fdfd0be2 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Fri, 22 Jul 2016 11:33:29 -0400
+Subject: [PATCH] rtl8xxxu: Set REG_USB_HRPWM to 0 for 8188eu
+
+This matches what 8192eu does
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -4236,7 +4236,7 @@ static int rtl8xxxu_init_device(struct i
+ val32 |= FPGA_RF_MODE_CCK;
+ rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+ }
+- } else if (priv->rtl_chip == RTL8192E) {
++ } else if (priv->rtl_chip == RTL8192E || priv->rtl_chip == RTL8188E) {
+ rtl8xxxu_write8(priv, REG_USB_HRPWM, 0x00);
+ }
+
--- /dev/null
+From 2ce9d067424ab287a1193330ee1c3607995cfbf4 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Fri, 22 Jul 2016 11:40:13 -0400
+Subject: [PATCH] rtl8xxxu: Use rtl8xxxu_gen1_channel_config() for 8188eu
+
+Channel configuration looks to be using the old gen1 style API
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -1009,6 +1009,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .init_phy_bb = rtl8188eu_init_phy_bb,
+ .init_phy_rf = rtl8188eu_init_phy_rf,
+ .phy_iq_calibrate = rtl8188eu_phy_iq_calibrate,
++ .config_channel = rtl8xxxu_gen1_config_channel,
+ .parse_rx_desc = rtl8xxxu_parse_rxdesc16,
+ .usb_quirks = rtl8188e_usb_quirks,
+ .writeN_block_size = 128,
--- /dev/null
+From ce938ec0ff5764c535cf19ee6dd52482e0b6ebbb Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Fri, 22 Jul 2016 11:44:12 -0400
+Subject: [PATCH] rtl8xxxu: Use gen2 H2C commands for 8188eu
+
+The 8188eu is a weird hybrid between the old gen1 and newer gen2
+APIs. It uses the newer API for H2C commands, hence use
+rtl8xxxu_gen2_update_rate_mask() and rtl8xxxu_gen2_report_connect().
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -1012,6 +1012,8 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .config_channel = rtl8xxxu_gen1_config_channel,
+ .parse_rx_desc = rtl8xxxu_parse_rxdesc16,
+ .usb_quirks = rtl8188e_usb_quirks,
++ .update_rate_mask = rtl8xxxu_gen2_update_rate_mask,
++ .report_connect = rtl8xxxu_gen2_report_connect,
+ .writeN_block_size = 128,
+ .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16),
+ .has_tx_report = 1,
--- /dev/null
+From b7472848032d36e227711d0381a58cc3114f1b33 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Fri, 22 Jul 2016 12:56:30 -0400
+Subject: [PATCH] rtl8xxxu: Initialize GPIO settings for 8188eu
+
+This matches what the vendor driver does, but is actually opposite of
+what it does for 8192eu.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 7 +++++++
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 1 +
+ 2 files changed, 8 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -4206,6 +4206,13 @@ static int rtl8xxxu_init_device(struct i
+ * Reset USB mode switch setting
+ */
+ rtl8xxxu_write8(priv, REG_ACLK_MON, 0x00);
++ } else if (priv->rtl_chip == RTL8188E) {
++ /*
++ * Init GPIO settings for 8188e
++ */
++ val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG);
++ val8 &= ~GPIO_MUXCFG_IO_SEL_ENBT;
++ rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8);
+ }
+
+ rtl8723a_phy_lc_calibrate(priv);
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
+@@ -143,6 +143,7 @@
+ #define REG_CAL_TIMER 0x003c
+ #define REG_ACLK_MON 0x003e
+ #define REG_GPIO_MUXCFG 0x0040
++#define GPIO_MUXCFG_IO_SEL_ENBT BIT(5)
+ #define REG_GPIO_IO_SEL 0x0042
+ #define REG_MAC_PINMUX_CFG 0x0043
+ #define REG_GPIO_PIN_CTRL 0x0044
--- /dev/null
+From 3bb9c23b43cc4cc37a06c20c62266128040cd5d7 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Fri, 22 Jul 2016 13:10:02 -0400
+Subject: [PATCH] rtl8xxxu: Add simple rtl8188eu_rf_on() routine
+
+It is not obvious from the vendor driver if we need more than this.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -980,6 +980,11 @@ exit:
+ return ret;
+ }
+
++static void rtl8188e_enable_rf(struct rtl8xxxu_priv *priv)
++{
++ rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
++}
++
+ static void rtl8188e_usb_quirks(struct rtl8xxxu_priv *priv)
+ {
+ u16 val16;
+@@ -1011,6 +1016,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .phy_iq_calibrate = rtl8188eu_phy_iq_calibrate,
+ .config_channel = rtl8xxxu_gen1_config_channel,
+ .parse_rx_desc = rtl8xxxu_parse_rxdesc16,
++ .enable_rf = rtl8188e_enable_rf,
+ .usb_quirks = rtl8188e_usb_quirks,
+ .update_rate_mask = rtl8xxxu_gen2_update_rate_mask,
+ .report_connect = rtl8xxxu_gen2_report_connect,
--- /dev/null
+From c1619fa7cc81439fa3a791e5462e161ccc5536e5 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Fri, 22 Jul 2016 13:17:36 -0400
+Subject: [PATCH] rtl8xxxu: Implement rtl8188e_disable_rf()
+
+This is partly guessware as there is no straight forward disable RF
+routine in the vendor driver.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 15 +++++++++++++++
+ 1 file changed, 15 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -985,6 +985,20 @@ static void rtl8188e_enable_rf(struct rt
+ rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
+ }
+
++static void rtl8188e_disable_rf(struct rtl8xxxu_priv *priv)
++{
++ u32 val32;
++
++ val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE);
++ val32 &= ~OFDM_RF_PATH_TX_MASK;
++ rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32);
++
++ /* Power down RF module */
++ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0);
++ if (priv->rf_paths == 2)
++ rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC, 0);
++}
++
+ static void rtl8188e_usb_quirks(struct rtl8xxxu_priv *priv)
+ {
+ u16 val16;
+@@ -1017,6 +1031,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .config_channel = rtl8xxxu_gen1_config_channel,
+ .parse_rx_desc = rtl8xxxu_parse_rxdesc16,
+ .enable_rf = rtl8188e_enable_rf,
++ .disable_rf = rtl8188e_disable_rf,
+ .usb_quirks = rtl8188e_usb_quirks,
+ .update_rate_mask = rtl8xxxu_gen2_update_rate_mask,
+ .report_connect = rtl8xxxu_gen2_report_connect,
--- /dev/null
+From acd23916afbf214c7e40fec769361d8e46a6886a Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Fri, 22 Jul 2016 13:40:55 -0400
+Subject: [PATCH] rtl8xxxu: 8188eu uses 32 byte TX descriptors
+
+Note the format is different and looks to be some bizarre hybrid of
+the gen1 and gen2 formats.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -1037,6 +1037,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .report_connect = rtl8xxxu_gen2_report_connect,
+ .writeN_block_size = 128,
+ .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16),
++ .tx_desc_size = sizeof(struct rtl8xxxu_txdesc32),
+ .has_tx_report = 1,
+ .gen2_thermal_meter = 1,
+ .adda_1t_init = 0x0b1b25a0,
--- /dev/null
+From d83a65b58e8626c9fab83e45bb7ec5aea9176504 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Fri, 22 Jul 2016 13:55:24 -0400
+Subject: [PATCH] rtl8xxxu: Add dummy rtl8188e_set_tx_power()
+
+To avoid crashing on launch, add a dummy set_tx_power() function for
+8188e.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -283,6 +283,11 @@ static struct rtl8xxxu_rfregval rtl8188e
+ {0xff, 0xffffffff}
+ };
+
++static void
++rtl8188e_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40)
++{
++}
++
+ static int rtl8188eu_parse_efuse(struct rtl8xxxu_priv *priv)
+ {
+ struct rtl8188eu_efuse *efuse = &priv->efuse_wifi.efuse8188eu;
+@@ -1033,6 +1038,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .enable_rf = rtl8188e_enable_rf,
+ .disable_rf = rtl8188e_disable_rf,
+ .usb_quirks = rtl8188e_usb_quirks,
++ .set_tx_power = rtl8188e_set_tx_power,
+ .update_rate_mask = rtl8xxxu_gen2_update_rate_mask,
+ .report_connect = rtl8xxxu_gen2_report_connect,
+ .writeN_block_size = 128,
--- /dev/null
+From 3c3fae09952723763d87cbd2a02be667a46a040a Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Fri, 22 Jul 2016 16:46:11 -0400
+Subject: [PATCH] rtl8xxxu: Update 8188e efuse definition for power values
+
+The 8188e uses a similar layout as the 8192e, however it does not have
+values for path B. Update struct rtl8188eu_efuse to reflect this and
+copy over path A values for path B.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 7 ++-----
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 19 +++++++++++--------
+ 2 files changed, 13 insertions(+), 13 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+@@ -880,11 +880,8 @@ struct rtl8192eu_efuse {
+ struct rtl8188eu_efuse {
+ __le16 rtl_id;
+ u8 res0[0x0e];
+- u8 cck_tx_power_index_A[3]; /* 0x10 */
+- u8 cck_tx_power_index_B[3];
+- u8 ht40_1s_tx_power_index_A[3]; /* 0x16 */
+- u8 ht40_1s_tx_power_index_B[3];
+- u8 res1[0x9c];
++ struct rtl8192eu_efuse_tx_power tx_power_index_A; /* 0x10 */
++ u8 res1[0x7e]; /* 0x3a */
+ u8 channel_plan; /* 0xb8 */
+ u8 xtal_k;
+ u8 thermal_meter;
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -298,17 +298,20 @@ static int rtl8188eu_parse_efuse(struct
+
+ ether_addr_copy(priv->mac_addr, efuse->mac_addr);
+
+- memcpy(priv->cck_tx_power_index_A, efuse->cck_tx_power_index_A,
+- sizeof(efuse->cck_tx_power_index_A));
+- memcpy(priv->cck_tx_power_index_B, efuse->cck_tx_power_index_B,
+- sizeof(efuse->cck_tx_power_index_B));
++ memcpy(priv->cck_tx_power_index_A, efuse->tx_power_index_A.cck_base,
++ sizeof(efuse->tx_power_index_A.cck_base));
++ /*
++ * Efuse is empty for path B, so copy in values from path A
++ */
++ memcpy(priv->cck_tx_power_index_B, efuse->tx_power_index_A.cck_base,
++ sizeof(efuse->tx_power_index_A.cck_base));
+
+ memcpy(priv->ht40_1s_tx_power_index_A,
+- priv->efuse_wifi.efuse8188eu.ht40_1s_tx_power_index_A,
+- sizeof(priv->ht40_1s_tx_power_index_A));
++ efuse->tx_power_index_A.ht40_base,
++ sizeof(efuse->tx_power_index_A.ht40_base));
+ memcpy(priv->ht40_1s_tx_power_index_B,
+- priv->efuse_wifi.efuse8188eu.ht40_1s_tx_power_index_B,
+- sizeof(priv->ht40_1s_tx_power_index_B));
++ efuse->tx_power_index_A.ht40_base,
++ sizeof(efuse->tx_power_index_A.ht40_base));
+
+ priv->xtalk = priv->efuse_wifi.efuse8188eu.xtal_k & 0x3f;
+
--- /dev/null
+From cf02f3fe981c1f11a41cf885d7c5a0298378b0d6 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Fri, 22 Jul 2016 16:50:59 -0400
+Subject: [PATCH] rtl8xxxu: Implement rtl8188e_set_tx_power()
+
+This matches the code used to set TX power on 8192eu, except it only
+handles path A.
+
+We should be able to consolidate this code.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 57 ++++++++++++++++++++++
+ 1 file changed, 57 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -283,9 +283,66 @@ static struct rtl8xxxu_rfregval rtl8188e
+ {0xff, 0xffffffff}
+ };
+
++int rtl8xxxu_8188e_channel_to_group(int channel)
++{
++ int group;
++
++ if (channel < 3)
++ group = 0;
++ else if (channel < 6)
++ group = 1;
++ else if (channel < 9)
++ group = 2;
++ else if (channel < 12)
++ group = 3;
++ else if (channel < 14)
++ group = 4;
++ else
++ group = 5;
++
++ return group;
++}
++
+ static void
+ rtl8188e_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40)
+ {
++ u32 val32, ofdm, mcs;
++ u8 cck, ofdmbase, mcsbase;
++ int group, tx_idx;
++
++ tx_idx = 0;
++ group = rtl8xxxu_8188e_channel_to_group(channel);
++
++ cck = priv->cck_tx_power_index_A[group];
++
++ val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32);
++ val32 &= 0xffff00ff;
++ val32 |= (cck << 8);
++ rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32);
++
++ val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11);
++ val32 &= 0xff;
++ val32 |= ((cck << 8) | (cck << 16) | (cck << 24));
++ rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32);
++
++ ofdmbase = priv->ht40_1s_tx_power_index_A[group];
++ ofdmbase += priv->ofdm_tx_power_diff[tx_idx].a;
++ ofdm = ofdmbase | ofdmbase << 8 | ofdmbase << 16 | ofdmbase << 24;
++
++ rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06, ofdm);
++ rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24, ofdm);
++
++ mcsbase = priv->ht40_1s_tx_power_index_A[group];
++ if (ht40)
++ mcsbase += priv->ht40_tx_power_diff[tx_idx++].a;
++ else
++ mcsbase += priv->ht20_tx_power_diff[tx_idx++].a;
++ mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24;
++
++ rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00, mcs);
++ rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, mcs);
++ rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS11_MCS08, mcs);
++ rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS15_MCS12, mcs);
+ }
+
+ static int rtl8188eu_parse_efuse(struct rtl8xxxu_priv *priv)
--- /dev/null
+From cea78f97a74d9e5e3a8cb701e89c3e5c656f5c64 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Tue, 26 Jul 2016 14:01:14 -0400
+Subject: [PATCH] rtl8xxxu: Implement rtl8xxxu_fill_txdesc_v3() for 8188eu
+
+Getting closer but still no cigar.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 10 ++++
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 1 +
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 62 ++++++++++++++++++++++
+ 3 files changed, 73 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+@@ -509,6 +509,8 @@ struct rtl8xxxu_txdesc40 {
+ #define TXDESC_AMPDU_DENSITY_SHIFT 20
+ #define TXDESC40_BT_INT BIT(23)
+ #define TXDESC40_GID_SHIFT 24
++#define TXDESC_ANTENNA_SELECT_A BIT(24)
++#define TXDESC_ANTENNA_SELECT_B BIT(25)
+
+ /* Word 3 */
+ #define TXDESC40_USE_DRIVER_RATE BIT(8)
+@@ -553,6 +555,10 @@ struct rtl8xxxu_txdesc40 {
+
+ /* Word 6 */
+ #define TXDESC_MAX_AGG_SHIFT 11
++#define TXDESC_USB_TX_AGG_SHIT 24
++
++/* Word 7 */
++#define TXDESC_ANTENNA_SELECT_C BIT(29)
+
+ /* Word 8 */
+ #define TXDESC40_HW_SEQ_ENABLE BIT(15)
+@@ -1484,6 +1490,10 @@ void rtl8xxxu_fill_txdesc_v2(struct ieee
+ struct rtl8xxxu_txdesc32 *tx_desc32, u32 rate,
+ u16 rate_flag, bool sgi, bool short_preamble,
+ bool ampdu_enable);
++void rtl8xxxu_fill_txdesc_v3(struct ieee80211_hdr *hdr,
++ struct rtl8xxxu_txdesc32 *tx_desc32, u32 rate,
++ u16 rate_flag, bool sgi, bool short_preamble,
++ bool ampdu_enable);
+
+ extern struct rtl8xxxu_fileops rtl8188eu_fops;
+ extern struct rtl8xxxu_fileops rtl8192cu_fops;
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -1101,6 +1101,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .set_tx_power = rtl8188e_set_tx_power,
+ .update_rate_mask = rtl8xxxu_gen2_update_rate_mask,
+ .report_connect = rtl8xxxu_gen2_report_connect,
++ .fill_txdesc = rtl8xxxu_fill_txdesc_v3,
+ .writeN_block_size = 128,
+ .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16),
+ .tx_desc_size = sizeof(struct rtl8xxxu_txdesc32),
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -4884,6 +4884,68 @@ rtl8xxxu_fill_txdesc_v2(struct ieee80211
+ }
+ }
+
++/*
++ * Fill in v3 (gen1) specific TX descriptor bits.
++ * This format is a hybrid between the v1 and v2 formats, only seen
++ * on 8188eu devices so far.
++ */
++void
++rtl8xxxu_fill_txdesc_v3(struct ieee80211_hdr *hdr,
++ struct rtl8xxxu_txdesc32 *tx_desc, u32 rate,
++ u16 rate_flag, bool sgi, bool short_preamble,
++ bool ampdu_enable)
++{
++ u16 seq_number;
++
++ seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
++
++ tx_desc->txdw5 = cpu_to_le32(rate);
++
++ /*
++ * Data/RTS rate FB limit
++ */
++ if (ieee80211_is_data(hdr->frame_control))
++ tx_desc->txdw5 |= cpu_to_le32(0x0001ff00);
++
++ tx_desc->txdw3 = cpu_to_le32((u32)seq_number << TXDESC32_SEQ_SHIFT);
++
++ if (ampdu_enable)
++ tx_desc->txdw2 |= cpu_to_le32(TXDESC40_AGG_ENABLE);
++ else
++ tx_desc->txdw2 |= cpu_to_le32(TXDESC40_AGG_BREAK);
++
++ if (ieee80211_is_mgmt(hdr->frame_control)) {
++ tx_desc->txdw5 = cpu_to_le32(rate);
++ tx_desc->txdw4 |= cpu_to_le32(TXDESC32_USE_DRIVER_RATE);
++ tx_desc->txdw5 |= cpu_to_le32(6 << TXDESC32_RETRY_LIMIT_SHIFT);
++ tx_desc->txdw5 |= cpu_to_le32(TXDESC32_RETRY_LIMIT_ENABLE);
++ }
++
++ if (ieee80211_is_data_qos(hdr->frame_control))
++ tx_desc->txdw4 |= cpu_to_le32(TXDESC32_QOS);
++
++ if (short_preamble)
++ tx_desc->txdw4 |= cpu_to_le32(TXDESC32_SHORT_PREAMBLE);
++
++ if (sgi)
++ tx_desc->txdw5 |= cpu_to_le32(TXDESC32_SHORT_GI);
++
++ if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) {
++ /*
++ * Use RTS rate 24M - does the mac80211 tell
++ * us which to use?
++ */
++ tx_desc->txdw4 |= cpu_to_le32(DESC_RATE_24M <<
++ TXDESC32_RTS_RATE_SHIFT);
++ tx_desc->txdw4 |= cpu_to_le32(TXDESC32_RTS_CTS_ENABLE);
++ tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE);
++ }
++
++ tx_desc->txdw2 |= cpu_to_le32(TXDESC_ANTENNA_SELECT_A |
++ TXDESC_ANTENNA_SELECT_B);
++ tx_desc->txdw7 |= cpu_to_le32(TXDESC_ANTENNA_SELECT_C);
++}
++
+ static void rtl8xxxu_tx(struct ieee80211_hw *hw,
+ struct ieee80211_tx_control *control,
+ struct sk_buff *skb)
--- /dev/null
+From cbbf4d6e0a8d8230aff7c4088cf1ed593e6002dd Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Fri, 29 Jul 2016 15:25:34 -0400
+Subject: [PATCH] rtl8xxxu: Add some 8188eu registers and update
+ CCK0_AFE_SETTING bit defines
+
+CCK0_AFE_SETTING is particular, it has the notion of primary RX antenna
+and optional RX antenna. When configuring RX for single antenna, setup
+should use the same antenna for default and optional. For AB setup,
+use antenna A as default and B as optional.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 24 ++++++++++++++++++++--
+ 1 file changed, 22 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
+@@ -938,6 +938,7 @@
+ #define REG_FPGA1_RF_MODE 0x0900
+
+ #define REG_FPGA1_TX_INFO 0x090c
++#define REG_ANT_MAPPING1 0x0914
+ #define REG_DPDT_CTRL 0x092c /* 8723BU */
+ #define REG_RFE_CTRL_ANTA_SRC 0x0930 /* 8723BU */
+ #define REG_RFE_PATH_SELECT 0x0940 /* 8723BU */
+@@ -949,9 +950,25 @@
+
+ #define REG_CCK0_AFE_SETTING 0x0a04
+ #define CCK0_AFE_RX_MASK 0x0f000000
+-#define CCK0_AFE_RX_ANT_AB BIT(24)
++#define CCK0_AFE_TX_MASK 0xf0000000
+ #define CCK0_AFE_RX_ANT_A 0
+-#define CCK0_AFE_RX_ANT_B (BIT(24) | BIT(26))
++#define CCK0_AFE_RX_ANT_B BIT(26)
++#define CCK0_AFE_RX_ANT_C BIT(27)
++#define CCK0_AFE_RX_ANT_D (BIT(26) | BIT(27))
++#define CCK0_AFE_RX_ANT_OPTION_A 0
++#define CCK0_AFE_RX_ANT_OPTION_B BIT(24)
++#define CCK0_AFE_RX_ANT_OPTION_C BIT(25)
++#define CCK0_AFE_RX_ANT_OPTION_D (BIT(24) | BIT(25))
++#define CCK0_AFE_TX_ANT_A BIT(31)
++#define CCK0_AFE_TX_ANT_B BIT(30)
++
++#define REG_CCK_ANTDIV_PARA2 0x0a04
++#define REG_BB_POWER_SAVE4 0x0a74
++
++/* 8188eu */
++#define REG_LNA_SWITCH 0x0b2c
++#define LNA_SWITCH_DISABLE_CSCG BIT(22)
++#define LNA_SWITCH_OUTPUT_CG BIT(31)
+
+ #define REG_CONFIG_ANT_A 0x0b68
+ #define REG_CONFIG_ANT_B 0x0b6c
+@@ -1004,6 +1021,9 @@
+
+ #define REG_OFDM0_RX_IQ_EXT_ANTA 0x0ca0
+
++/* 8188eu */
++#define REG_ANTDIV_PARA1 0x0ca4
++
+ /* 8723bu */
+ #define REG_OFDM0_TX_PSDO_NOISE_WEIGHT 0x0ce4
+
--- /dev/null
+From ebf1c90b91cd40052552dd4efa1a54bbbd43ca5f Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Fri, 29 Jul 2016 15:57:19 -0400
+Subject: [PATCH] rtl8xxxu: Improve register description for REG_FPGA1_TX_INFO
+
+This is based on Hal_SetAntenna() from the 8188eu driver
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
+@@ -938,6 +938,15 @@
+ #define REG_FPGA1_RF_MODE 0x0900
+
+ #define REG_FPGA1_TX_INFO 0x090c
++#define FPGA1_TX_ANT_MASK 0x0000000f
++#define FPGA1_TX_ANT_L_MASK 0x000000f0
++#define FPGA1_TX_ANT_NON_HT_MASK 0x00000f00
++#define FPGA1_TX_ANT_HT1_MASK 0x0000f000
++#define FPGA1_TX_ANT_HT2_MASK 0x000f0000
++#define FPGA1_TX_ANT_HT_S1_MASK 0x00f00000
++#define FPGA1_TX_ANT_NON_HT_S1_MASK 0x0f000000
++#define FPGA1_TX_OFDM_TXSC_MASK 0x30000000
++
+ #define REG_ANT_MAPPING1 0x0914
+ #define REG_DPDT_CTRL 0x092c /* 8723BU */
+ #define REG_RFE_CTRL_ANTA_SRC 0x0930 /* 8723BU */
--- /dev/null
+From 9df5d333304264856465094f9529b414c4c279fb Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
+Date: Fri, 29 Jul 2016 18:22:37 +0200
+Subject: [PATCH] rtl8xxxu: properly detect RTL8188EU devices
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The assumption that all RTL8188EU have chip cut >= C is wrong.
+However, RTL8188EU devices can be easily differentiated from RTL8188CU devices
+relying on TX report capbility.
+
+Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -1683,7 +1683,7 @@ static int rtl8xxxu_identify_chip(struct
+ }
+ priv->has_wifi = 1;
+ } else {
+- if (priv->chip_cut >= 2) {
++ if (priv->fops->has_tx_report) {
+ sprintf(priv->chip_name, "8188EU");
+ priv->rf_paths = 1;
+ priv->rx_paths = 1;
--- /dev/null
+From 8cacc26a9247d1d661b887ac77d88c73b2b9ec1d Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Mon, 8 Aug 2016 15:04:36 -0400
+Subject: [PATCH] rtl8xxxu: Correct TX_TOTAL_PAGE_NUM for 8188eu
+
+For some reason I had gotten this off-by-one when pulling them number
+from the vendor driver.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+@@ -42,7 +42,7 @@
+ #define REALTEK_USB_CMD_IDX 0x00
+
+ #define TX_TOTAL_PAGE_NUM 0xf8
+-#define TX_TOTAL_PAGE_NUM_8188E 0xa8
++#define TX_TOTAL_PAGE_NUM_8188E 0xa9
+ #define TX_TOTAL_PAGE_NUM_8192E 0xf3
+ #define TX_TOTAL_PAGE_NUM_8723B 0xf7
+ /* (HPQ + LPQ + NPQ + PUBQ) = TX_TOTAL_PAGE_NUM */
--- /dev/null
+From 763213d99c4d9c20cf69848fc6784d38597ab0ff Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 10 Aug 2016 15:40:30 -0400
+Subject: [PATCH] rtl8xxxu: Implement 8188eu specific 8051 reset function
+
+The 8188eu doesn't seem to require the additional hacks used on some
+other chips.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 14 +++++++++++++-
+ 1 file changed, 13 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -389,6 +389,18 @@ static int rtl8188eu_parse_efuse(struct
+ return 0;
+ }
+
++void rtl8188eu_reset_8051(struct rtl8xxxu_priv *priv)
++{
++ u16 sys_func;
++
++ sys_func = rtl8xxxu_read16(priv, REG_SYS_FUNC);
++ sys_func &= ~SYS_FUNC_CPU_ENABLE;
++ rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func);
++
++ sys_func |= SYS_FUNC_CPU_ENABLE;
++ rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func);
++}
++
+ static int rtl8188eu_load_firmware(struct rtl8xxxu_priv *priv)
+ {
+ char *fw_name;
+@@ -1088,7 +1100,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .load_firmware = rtl8188eu_load_firmware,
+ .power_on = rtl8188eu_power_on,
+ .power_off = rtl8xxxu_power_off,
+- .reset_8051 = rtl8xxxu_reset_8051,
++ .reset_8051 = rtl8188eu_reset_8051,
+ .llt_init = rtl8xxxu_auto_llt_table,
+ .init_phy_bb = rtl8188eu_init_phy_bb,
+ .init_phy_rf = rtl8188eu_init_phy_rf,
--- /dev/null
+From 17cb73ae89e15b60276f0b6583d4ed30b6bdeb4f Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 10 Aug 2016 15:41:13 -0400
+Subject: [PATCH] rtl8xxxu: Disable packet DMA aggregation on 8188eu
+
+For now disable packet DMA aggregation on the 8188eu, rather then
+risking the feature being left on by the init tables.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 14 ++++++++++++++
+ 1 file changed, 14 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -345,6 +345,19 @@ rtl8188e_set_tx_power(struct rtl8xxxu_pr
+ rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS15_MCS12, mcs);
+ }
+
++void rtl8188eu_init_aggregation(struct rtl8xxxu_priv *priv)
++{
++ u8 agg_ctrl, usb_spec;
++
++ usb_spec = rtl8xxxu_read8(priv, REG_USB_SPECIAL_OPTION);
++ usb_spec &= ~USB_SPEC_USB_AGG_ENABLE;
++ rtl8xxxu_write8(priv, REG_USB_SPECIAL_OPTION, usb_spec);
++
++ agg_ctrl = rtl8xxxu_read8(priv, REG_TRXDMA_CTRL);
++ agg_ctrl &= ~TRXDMA_CTRL_RXDMA_AGG_EN;
++ rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl);
++}
++
+ static int rtl8188eu_parse_efuse(struct rtl8xxxu_priv *priv)
+ {
+ struct rtl8188eu_efuse *efuse = &priv->efuse_wifi.efuse8188eu;
+@@ -1107,6 +1120,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .phy_iq_calibrate = rtl8188eu_phy_iq_calibrate,
+ .config_channel = rtl8xxxu_gen1_config_channel,
+ .parse_rx_desc = rtl8xxxu_parse_rxdesc16,
++ .init_aggregation = rtl8188eu_init_aggregation,
+ .enable_rf = rtl8188e_enable_rf,
+ .disable_rf = rtl8188e_disable_rf,
+ .usb_quirks = rtl8188e_usb_quirks,
--- /dev/null
+From af4fefead371c6ab89b323ff4b10881369bf4170 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 10 Aug 2016 16:06:37 -0400
+Subject: [PATCH] rtl8xxxu: 8188eu set REG_OFDM0_XA_AGC_CORE1 to match vendor
+ driver
+
+We have no description of this register, so not sure why this differs
+from say 8723au.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -5880,7 +5880,10 @@ exit:
+ rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0xffff);
+ rtl8xxxu_write16(priv, REG_RXFLTMAP0, 0xffff);
+
+- rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, 0x6954341e);
++ if (priv->rtl_chip == RTL8188E)
++ rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, 0x6955341e);
++ else
++ rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, 0x6954341e);
+
+ return ret;
+
--- /dev/null
+From b3ce6298eb09b26c5abbc5dca8c8dfa18f41ea12 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Thu, 18 Aug 2016 12:20:31 -0400
+Subject: [PATCH] rtl8xxxu: Implement rtl8188eu_config_channel()
+
+The 8188eu doesn't seem to have REG_FPGA0_ANALOG2
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 118 ++++++++++++++++++++-
+ 1 file changed, 117 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -345,6 +345,122 @@ rtl8188e_set_tx_power(struct rtl8xxxu_pr
+ rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS15_MCS12, mcs);
+ }
+
++void rtl8188eu_config_channel(struct ieee80211_hw *hw)
++{
++ struct rtl8xxxu_priv *priv = hw->priv;
++ u32 val32, rsr;
++ u8 val8, opmode;
++ bool ht = true;
++ int sec_ch_above, channel;
++ int i;
++
++ opmode = rtl8xxxu_read8(priv, REG_BW_OPMODE);
++ rsr = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET);
++ channel = hw->conf.chandef.chan->hw_value;
++
++ switch (hw->conf.chandef.width) {
++ case NL80211_CHAN_WIDTH_20_NOHT:
++ ht = false;
++ case NL80211_CHAN_WIDTH_20:
++ opmode |= BW_OPMODE_20MHZ;
++ rtl8xxxu_write8(priv, REG_BW_OPMODE, opmode);
++
++ val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
++ val32 &= ~FPGA_RF_MODE;
++ rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
++
++ val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE);
++ val32 &= ~FPGA_RF_MODE;
++ rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32);
++ break;
++ case NL80211_CHAN_WIDTH_40:
++ if (hw->conf.chandef.center_freq1 >
++ hw->conf.chandef.chan->center_freq) {
++ sec_ch_above = 1;
++ channel += 2;
++ } else {
++ sec_ch_above = 0;
++ channel -= 2;
++ }
++
++ opmode &= ~BW_OPMODE_20MHZ;
++ rtl8xxxu_write8(priv, REG_BW_OPMODE, opmode);
++ rsr &= ~RSR_RSC_BANDWIDTH_40M;
++ if (sec_ch_above)
++ rsr |= RSR_RSC_UPPER_SUB_CHANNEL;
++ else
++ rsr |= RSR_RSC_LOWER_SUB_CHANNEL;
++ rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, rsr);
++
++ val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
++ val32 |= FPGA_RF_MODE;
++ rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
++
++ val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE);
++ val32 |= FPGA_RF_MODE;
++ rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32);
++
++ /*
++ * Set Control channel to upper or lower. These settings
++ * are required only for 40MHz
++ */
++ val32 = rtl8xxxu_read32(priv, REG_CCK0_SYSTEM);
++ val32 &= ~CCK0_SIDEBAND;
++ if (!sec_ch_above)
++ val32 |= CCK0_SIDEBAND;
++ rtl8xxxu_write32(priv, REG_CCK0_SYSTEM, val32);
++
++ val32 = rtl8xxxu_read32(priv, REG_OFDM1_LSTF);
++ val32 &= ~OFDM_LSTF_PRIME_CH_MASK; /* 0xc00 */
++ if (sec_ch_above)
++ val32 |= OFDM_LSTF_PRIME_CH_LOW;
++ else
++ val32 |= OFDM_LSTF_PRIME_CH_HIGH;
++ rtl8xxxu_write32(priv, REG_OFDM1_LSTF, val32);
++
++ val32 = rtl8xxxu_read32(priv, REG_FPGA0_POWER_SAVE);
++ val32 &= ~(FPGA0_PS_LOWER_CHANNEL | FPGA0_PS_UPPER_CHANNEL);
++ if (sec_ch_above)
++ val32 |= FPGA0_PS_UPPER_CHANNEL;
++ else
++ val32 |= FPGA0_PS_LOWER_CHANNEL;
++ rtl8xxxu_write32(priv, REG_FPGA0_POWER_SAVE, val32);
++ break;
++
++ default:
++ break;
++ }
++
++ for (i = RF_A; i < priv->rf_paths; i++) {
++ val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG);
++ val32 &= ~MODE_AG_CHANNEL_MASK;
++ val32 |= channel;
++ rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32);
++ }
++
++ if (ht)
++ val8 = 0x0e;
++ else
++ val8 = 0x0a;
++
++#if 0
++ rtl8xxxu_write8(priv, REG_SIFS_CCK + 1, val8);
++ rtl8xxxu_write8(priv, REG_SIFS_OFDM + 1, val8);
++
++ rtl8xxxu_write16(priv, REG_R2T_SIFS, 0x0808);
++ rtl8xxxu_write16(priv, REG_T2T_SIFS, 0x0a0a);
++#endif
++
++ for (i = RF_A; i < priv->rf_paths; i++) {
++ val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG);
++ if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40)
++ val32 &= ~MODE_AG_CHANNEL_20MHZ;
++ else
++ val32 |= MODE_AG_CHANNEL_20MHZ;
++ rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32);
++ }
++}
++
+ void rtl8188eu_init_aggregation(struct rtl8xxxu_priv *priv)
+ {
+ u8 agg_ctrl, usb_spec;
+@@ -1118,7 +1234,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .init_phy_bb = rtl8188eu_init_phy_bb,
+ .init_phy_rf = rtl8188eu_init_phy_rf,
+ .phy_iq_calibrate = rtl8188eu_phy_iq_calibrate,
+- .config_channel = rtl8xxxu_gen1_config_channel,
++ .config_channel = rtl8188eu_config_channel,
+ .parse_rx_desc = rtl8xxxu_parse_rxdesc16,
+ .init_aggregation = rtl8188eu_init_aggregation,
+ .enable_rf = rtl8188e_enable_rf,
--- /dev/null
+From 533293085b6c331f20c36fa09fe3cf1e904ce259 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 24 Aug 2016 11:31:38 -0400
+Subject: [PATCH] rtl8xxxu: Clean up llt_init() API
+
+Remove last_tx_page argument from the llt_init() function. The
+rtl8xxxu_fileops structure contains the correct TX_TOTAL_PAGE_NUM
+value for the device, and rtl8xxxu_auto_llt_table() doesn't need to
+know the value in the first place.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 6 +++---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 9 ++++++---
+ 2 files changed, 9 insertions(+), 6 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+@@ -1367,7 +1367,7 @@ struct rtl8xxxu_fileops {
+ int (*power_on) (struct rtl8xxxu_priv *priv);
+ void (*power_off) (struct rtl8xxxu_priv *priv);
+ void (*reset_8051) (struct rtl8xxxu_priv *priv);
+- int (*llt_init) (struct rtl8xxxu_priv *priv, u8 last_tx_page);
++ int (*llt_init) (struct rtl8xxxu_priv *priv);
+ void (*init_phy_bb) (struct rtl8xxxu_priv *priv);
+ int (*init_phy_rf) (struct rtl8xxxu_priv *priv);
+ void (*phy_init_antenna_selection) (struct rtl8xxxu_priv *priv);
+@@ -1449,14 +1449,14 @@ int rtl8xxxu_load_firmware(struct rtl8xx
+ void rtl8xxxu_firmware_self_reset(struct rtl8xxxu_priv *priv);
+ void rtl8xxxu_power_off(struct rtl8xxxu_priv *priv);
+ void rtl8xxxu_reset_8051(struct rtl8xxxu_priv *priv);
+-int rtl8xxxu_auto_llt_table(struct rtl8xxxu_priv *priv, u8 last_tx_page);
++int rtl8xxxu_auto_llt_table(struct rtl8xxxu_priv *priv);
+ void rtl8xxxu_gen2_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start);
+ int rtl8xxxu_flush_fifo(struct rtl8xxxu_priv *priv);
+ int rtl8xxxu_gen2_h2c_cmd(struct rtl8xxxu_priv *priv,
+ struct h2c_cmd *h2c, int len);
+ int rtl8xxxu_active_to_lps(struct rtl8xxxu_priv *priv);
+ void rtl8xxxu_disabled_to_emu(struct rtl8xxxu_priv *priv);
+-int rtl8xxxu_init_llt_table(struct rtl8xxxu_priv *priv, u8 last_tx_page);
++int rtl8xxxu_init_llt_table(struct rtl8xxxu_priv *priv);
+ void rtl8xxxu_gen1_phy_iq_calibrate(struct rtl8xxxu_priv *priv);
+ void rtl8xxxu_gen1_init_phy_bb(struct rtl8xxxu_priv *priv);
+ void rtl8xxxu_gen1_set_tx_power(struct rtl8xxxu_priv *priv,
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -2482,10 +2482,13 @@ static int rtl8xxxu_llt_write(struct rtl
+ return ret;
+ }
+
+-int rtl8xxxu_init_llt_table(struct rtl8xxxu_priv *priv, u8 last_tx_page)
++int rtl8xxxu_init_llt_table(struct rtl8xxxu_priv *priv)
+ {
+ int ret;
+ int i;
++ u8 last_tx_page;
++
++ last_tx_page = priv->fops->total_page_num;
+
+ for (i = 0; i < last_tx_page; i++) {
+ ret = rtl8xxxu_llt_write(priv, i, i + 1);
+@@ -2513,7 +2516,7 @@ exit:
+ return ret;
+ }
+
+-int rtl8xxxu_auto_llt_table(struct rtl8xxxu_priv *priv, u8 last_tx_page)
++int rtl8xxxu_auto_llt_table(struct rtl8xxxu_priv *priv)
+ {
+ u32 val32;
+ int ret = 0;
+@@ -3999,7 +4002,7 @@ static int rtl8xxxu_init_device(struct i
+
+ dev_dbg(dev, "%s: macpower %i\n", __func__, macpower);
+ if (!macpower) {
+- ret = priv->fops->llt_init(priv, TX_TOTAL_PAGE_NUM);
++ ret = priv->fops->llt_init(priv);
+ if (ret) {
+ dev_warn(dev, "%s: LLT table init failed\n", __func__);
+ goto exit;
--- /dev/null
+From 2c6b2e7aadc24a58bac9321bcf15262519f903a8 Mon Sep 17 00:00:00 2001
+From: Taehee Yoo <ap420073@gmail.com>
+Date: Sun, 21 Aug 2016 20:38:22 +0900
+Subject: [PATCH] rtl8xxxu : Fix rtl8188eu connection fail
+
+rtl8188eu vendor driver's LLT init routine is similar
+rtl8xxxu_init_llt_table() than rtl8xxxu_auto_llt_table().
+
+So now, rtl8188eu can connect to AP.
+
+Signed-off-by: Taehee Yoo <ap420073@gmail.com>
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -1230,7 +1230,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .power_on = rtl8188eu_power_on,
+ .power_off = rtl8xxxu_power_off,
+ .reset_8051 = rtl8188eu_reset_8051,
+- .llt_init = rtl8xxxu_auto_llt_table,
++ .llt_init = rtl8xxxu_init_llt_table,
+ .init_phy_bb = rtl8188eu_init_phy_bb,
+ .init_phy_rf = rtl8188eu_init_phy_rf,
+ .phy_iq_calibrate = rtl8188eu_phy_iq_calibrate,
--- /dev/null
+From 4bc5ab6c3655cead3401c85e9dd174c7453c94eb Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 24 Aug 2016 13:54:00 -0400
+Subject: [PATCH] rtl8xxxu: Do not set auto rate fallback on 8188eu
+
+Introduce a fileops flag to indicate whether the device has this
+feature.
+
+Reported-by: Taehee Yoo <ap420073@gmail.com>
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 1 +
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c | 1 +
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c | 1 +
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c | 1 +
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c | 1 +
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 15 ++++++++++-----
+ 6 files changed, 15 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+@@ -1396,6 +1396,7 @@ struct rtl8xxxu_fileops {
+ u8 has_s0s1:1;
+ u8 has_tx_report:1;
+ u8 gen2_thermal_meter:1;
++ u8 has_darfrc:1;
+ u32 adda_1t_init;
+ u32 adda_1t_path_on;
+ u32 adda_2t_path_on_a;
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
+@@ -572,6 +572,7 @@ struct rtl8xxxu_fileops rtl8192cu_fops =
+ .rx_agg_buf_size = 16000,
+ .tx_desc_size = sizeof(struct rtl8xxxu_txdesc32),
+ .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16),
++ .has_darfrc = 1,
+ .adda_1t_init = 0x0b1b25a0,
+ .adda_1t_path_on = 0x0bdb25a0,
+ .adda_2t_path_on_a = 0x04db25a4,
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
+@@ -1649,6 +1649,7 @@ struct rtl8xxxu_fileops rtl8192eu_fops =
+ .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24),
+ .has_s0s1 = 0,
+ .gen2_thermal_meter = 1,
++ .has_darfrc = 1,
+ .adda_1t_init = 0x0fc01616,
+ .adda_1t_path_on = 0x0fc01616,
+ .adda_2t_path_on_a = 0x0fc01616,
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c
+@@ -389,6 +389,7 @@ struct rtl8xxxu_fileops rtl8723au_fops =
+ .rx_agg_buf_size = 16000,
+ .tx_desc_size = sizeof(struct rtl8xxxu_txdesc32),
+ .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16),
++ .has_darfrc = 1,
+ .adda_1t_init = 0x0b1b25a0,
+ .adda_1t_path_on = 0x0bdb25a0,
+ .adda_2t_path_on_a = 0x04db25a4,
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
+@@ -1669,6 +1669,7 @@ struct rtl8xxxu_fileops rtl8723bu_fops =
+ .has_s0s1 = 1,
+ .has_tx_report = 1,
+ .gen2_thermal_meter = 1,
++ .has_darfrc = 1,
+ .adda_1t_init = 0x01c00014,
+ .adda_1t_path_on = 0x01c00014,
+ .adda_2t_path_on_a = 0x01c00014,
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -4104,11 +4104,16 @@ static int rtl8xxxu_init_device(struct i
+ rtl8xxxu_write32(priv, REG_EDCA_VI_PARAM, 0x005ea324);
+ rtl8xxxu_write32(priv, REG_EDCA_VO_PARAM, 0x002fa226);
+
+- /* Set data auto rate fallback retry count */
+- rtl8xxxu_write32(priv, REG_DARFRC, 0x00000000);
+- rtl8xxxu_write32(priv, REG_DARFRC + 4, 0x10080404);
+- rtl8xxxu_write32(priv, REG_RARFRC, 0x04030201);
+- rtl8xxxu_write32(priv, REG_RARFRC + 4, 0x08070605);
++ /*
++ * Set data auto rate fallback retry count.
++ * Notably the 8188eu doesn't seem to use this
++ */
++ if (priv->fops->has_darfrc) {
++ rtl8xxxu_write32(priv, REG_DARFRC, 0x00000000);
++ rtl8xxxu_write32(priv, REG_DARFRC + 4, 0x10080404);
++ rtl8xxxu_write32(priv, REG_RARFRC, 0x04030201);
++ rtl8xxxu_write32(priv, REG_RARFRC + 4, 0x08070605);
++ }
+
+ val8 = rtl8xxxu_read8(priv, REG_FWHW_TXQ_CTRL);
+ val8 |= FWHW_TXQ_CTRL_AMPDU_RETRY;
--- /dev/null
+From e3c6694ed9367142704930754f3d6bff6c25f7e7 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 24 Aug 2016 14:06:04 -0400
+Subject: [PATCH] rtl8xxxu: Use a struct rtl8xxxu_fileops * in
+ rtl8xxxu_init_device()
+
+This saves some 217, or about, derefences of priv->fops.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 39 +++++++++++-----------
+ 1 file changed, 20 insertions(+), 19 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -3896,6 +3896,7 @@ static int rtl8xxxu_init_device(struct i
+ {
+ struct rtl8xxxu_priv *priv = hw->priv;
+ struct device *dev = &priv->udev->dev;
++ struct rtl8xxxu_fileops *fops = priv->fops;
+ bool macpower;
+ int ret;
+ u8 val8;
+@@ -3914,7 +3915,7 @@ static int rtl8xxxu_init_device(struct i
+ else
+ macpower = true;
+
+- ret = priv->fops->power_on(priv);
++ ret = fops->power_on(priv);
+ if (ret < 0) {
+ dev_warn(dev, "%s: Failed power on\n", __func__);
+ goto exit;
+@@ -3931,7 +3932,7 @@ static int rtl8xxxu_init_device(struct i
+ /*
+ * Set RX page boundary
+ */
+- rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, priv->fops->trxff_boundary);
++ rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, fops->trxff_boundary);
+
+ ret = rtl8xxxu_download_firmware(priv);
+ dev_dbg(dev, "%s: download_firmware %i\n", __func__, ret);
+@@ -3942,8 +3943,8 @@ static int rtl8xxxu_init_device(struct i
+ if (ret)
+ goto exit;
+
+- if (priv->fops->phy_init_antenna_selection)
+- priv->fops->phy_init_antenna_selection(priv);
++ if (fops->phy_init_antenna_selection)
++ fops->phy_init_antenna_selection(priv);
+
+ ret = rtl8xxxu_init_mac(priv);
+
+@@ -3956,7 +3957,7 @@ static int rtl8xxxu_init_device(struct i
+ if (ret)
+ goto exit;
+
+- ret = priv->fops->init_phy_rf(priv);
++ ret = fops->init_phy_rf(priv);
+ if (ret)
+ goto exit;
+
+@@ -3982,7 +3983,7 @@ static int rtl8xxxu_init_device(struct i
+ /*
+ * Set TX buffer boundary
+ */
+- val8 = priv->fops->total_page_num + 1;
++ val8 = fops->total_page_num + 1;
+
+ rtl8xxxu_write8(priv, REG_TXPKTBUF_BCNQ_BDNY, val8);
+ rtl8xxxu_write8(priv, REG_TXPKTBUF_MGQ_BDNY, val8);
+@@ -3995,14 +3996,14 @@ static int rtl8xxxu_init_device(struct i
+ * The vendor drivers set PBP for all devices, except 8192e.
+ * There is no explanation for this in any of the sources.
+ */
+- val8 = (priv->fops->pbp_rx << PBP_PAGE_SIZE_RX_SHIFT) |
+- (priv->fops->pbp_tx << PBP_PAGE_SIZE_TX_SHIFT);
++ val8 = (fops->pbp_rx << PBP_PAGE_SIZE_RX_SHIFT) |
++ (fops->pbp_tx << PBP_PAGE_SIZE_TX_SHIFT);
+ if (priv->rtl_chip != RTL8192E)
+ rtl8xxxu_write8(priv, REG_PBP, val8);
+
+ dev_dbg(dev, "%s: macpower %i\n", __func__, macpower);
+ if (!macpower) {
+- ret = priv->fops->llt_init(priv);
++ ret = fops->llt_init(priv);
+ if (ret) {
+ dev_warn(dev, "%s: LLT table init failed\n", __func__);
+ goto exit;
+@@ -4011,12 +4012,12 @@ static int rtl8xxxu_init_device(struct i
+ /*
+ * Chip specific quirks
+ */
+- priv->fops->usb_quirks(priv);
++ fops->usb_quirks(priv);
+
+ /*
+ * Enable TX report and TX report timer for 8723bu/8188eu/...
+ */
+- if (priv->fops->has_tx_report) {
++ if (fops->has_tx_report) {
+ val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
+ val8 |= TX_REPORT_CTRL_TIMER_ENABLE;
+ rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
+@@ -4108,7 +4109,7 @@ static int rtl8xxxu_init_device(struct i
+ * Set data auto rate fallback retry count.
+ * Notably the 8188eu doesn't seem to use this
+ */
+- if (priv->fops->has_darfrc) {
++ if (fops->has_darfrc) {
+ rtl8xxxu_write32(priv, REG_DARFRC, 0x00000000);
+ rtl8xxxu_write32(priv, REG_DARFRC + 4, 0x10080404);
+ rtl8xxxu_write32(priv, REG_RARFRC, 0x04030201);
+@@ -4165,8 +4166,8 @@ static int rtl8xxxu_init_device(struct i
+ rtl8xxxu_write8(priv, REG_RSV_CTRL, val8);
+ }
+
+- if (priv->fops->init_aggregation)
+- priv->fops->init_aggregation(priv);
++ if (fops->init_aggregation)
++ fops->init_aggregation(priv);
+
+ /*
+ * Enable CCK and OFDM block
+@@ -4183,7 +4184,7 @@ static int rtl8xxxu_init_device(struct i
+ /*
+ * Start out with default power levels for channel 6, 20MHz
+ */
+- priv->fops->set_tx_power(priv, 1, false);
++ fops->set_tx_power(priv, 1, false);
+
+ /* Let the 8051 take control of antenna setting */
+ if (priv->rtl_chip != RTL8192E) {
+@@ -4199,8 +4200,8 @@ static int rtl8xxxu_init_device(struct i
+
+ rtl8xxxu_write16(priv, REG_FAST_EDCA_CTRL, 0);
+
+- if (priv->fops->init_statistics)
+- priv->fops->init_statistics(priv);
++ if (fops->init_statistics)
++ fops->init_statistics(priv);
+
+ if (priv->rtl_chip == RTL8192E) {
+ /*
+@@ -4225,12 +4226,12 @@ static int rtl8xxxu_init_device(struct i
+
+ rtl8723a_phy_lc_calibrate(priv);
+
+- priv->fops->phy_iq_calibrate(priv);
++ fops->phy_iq_calibrate(priv);
+
+ /*
+ * This should enable thermal meter
+ */
+- if (priv->fops->gen2_thermal_meter)
++ if (fops->gen2_thermal_meter)
+ rtl8xxxu_write_rfreg(priv,
+ RF_A, RF6052_REG_T_METER_8723B, 0x37cf8);
+ else
--- /dev/null
+From c62a97a358ce2ba090efe1b447fa61a7104520ef Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Mon, 25 Jul 2016 12:32:02 -0400
+Subject: [PATCH] rtl8xxxu: Enable 8188eu driver
+
+This enables the 8188eu driver - this should work by now.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -539,7 +539,6 @@ static int rtl8188eu_load_firmware(struc
+
+ ret = rtl8xxxu_load_firmware(priv, fw_name);
+
+- return -EINVAL;
+ return ret;
+ }
+
--- /dev/null
+From e234d016528d2c22cca59faf87e675f8b72b8a83 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Fri, 26 Aug 2016 10:28:45 -0400
+Subject: [PATCH] rtl8xxxu: Add rtl8188etv to USB device list
+
+Hans de Goede reported this works for him with two different tablets.
+
+Reported-by: Hans de Goede <hdegoede@redhat.com>
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -6256,6 +6256,9 @@ static struct usb_device_id dev_table[]
+ #ifdef CPTCFG_RTL8XXXU_UNTESTED
+ {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8179, 0xff, 0xff, 0xff),
+ .driver_info = (unsigned long)&rtl8188eu_fops},
++/* Tested by Hans de Goede - rtl8188etv */
++{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x0179, 0xff, 0xff, 0xff),
++ .driver_info = (unsigned long)&rtl8188eu_fops},
+ /* Still supported by rtlwifi */
+ {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8176, 0xff, 0xff, 0xff),
+ .driver_info = (unsigned long)&rtl8192cu_fops},
--- /dev/null
+From cdf2dd45b570739953d1ed37b92536a85a94f2c1 Mon Sep 17 00:00:00 2001
+From: Andrea Merello <andrea.merello@gmail.com>
+Date: Fri, 26 Aug 2016 19:18:17 +0200
+Subject: [PATCH] rtl8xxxu: Add sitecom dongle to USB device list
+
+Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -6259,6 +6259,9 @@ static struct usb_device_id dev_table[]
+ /* Tested by Hans de Goede - rtl8188etv */
+ {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x0179, 0xff, 0xff, 0xff),
+ .driver_info = (unsigned long)&rtl8188eu_fops},
++/* Sitecom rtl8188eus */
++{USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x0076, 0xff, 0xff, 0xff),
++ .driver_info = (unsigned long)&rtl8188eu_fops},
+ /* Still supported by rtlwifi */
+ {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8176, 0xff, 0xff, 0xff),
+ .driver_info = (unsigned long)&rtl8192cu_fops},
--- /dev/null
+From ed9fac53f69189d25affa6baf2e921235724d668 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Fri, 26 Aug 2016 15:16:32 -0400
+Subject: [PATCH] rtl8xxxu: Implement rtl8188eu_active_to_emu()
+
+Per the vendor driver's sequence table, this seems to be the correct
+way to disable RF on the 8188eu, even if the driver doesn't actually
+call the sequence by itself.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 38 ++++++++++++++++++++++
+ 1 file changed, 38 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -1155,6 +1155,42 @@ exit:
+ return ret;
+ }
+
++static int rtl8188eu_active_to_emu(struct rtl8xxxu_priv *priv)
++{
++ u8 val8;
++ int count, ret = 0;
++
++ /* Turn off RF */
++ rtl8xxxu_write8(priv, REG_RF_CTRL, 0);
++
++ /* LDO Sleep mode */
++ val8 = rtl8xxxu_read8(priv, REG_LPLDO_CTRL);
++ val8 |= BIT(4);
++ rtl8xxxu_write8(priv, REG_LPLDO_CTRL, val8);
++
++ /* 0x0005[1] = 1 turn off MAC by HW state machine*/
++ val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
++ val8 |= BIT(1);
++ rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
++
++ for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
++ val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
++ if ((val8 & BIT(1)) == 0)
++ break;
++ udelay(10);
++ }
++
++ if (!count) {
++ dev_warn(&priv->udev->dev, "%s: Disabling MAC timed out\n",
++ __func__);
++ ret = -EBUSY;
++ goto exit;
++ }
++
++exit:
++ return ret;
++}
++
+ static int rtl8188eu_power_on(struct rtl8xxxu_priv *priv)
+ {
+ u16 val16;
+@@ -1202,6 +1238,8 @@ static void rtl8188e_disable_rf(struct r
+ rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0);
+ if (priv->rf_paths == 2)
+ rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC, 0);
++
++ rtl8188eu_active_to_emu(priv);
+ }
+
+ static void rtl8188e_usb_quirks(struct rtl8xxxu_priv *priv)
--- /dev/null
+From 034fb94799289990283082eef61934f5eb9e939f Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Fri, 26 Aug 2016 16:09:00 -0400
+Subject: [PATCH] rtl8xxxu: Implement rtl8188eu_power_off()
+
+This allows the firmware to reload correctly upon rmmod/insmod.
+However the device still doesn't receive data upon reloading.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 130 ++++++++++++++++++++-
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 2 +
+ 2 files changed, 131 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -1191,6 +1191,71 @@ exit:
+ return ret;
+ }
+
++static int rtl8188eu_emu_to_disabled(struct rtl8xxxu_priv *priv)
++{
++ u8 val8;
++
++ /* 0x04[12:11] = 01 enable WL suspend */
++ val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2);
++ val8 &= ~BIT(0);
++ rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8);
++
++ val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
++ val8 |= BIT(7);
++ rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
++
++ return 0;
++}
++
++static int rtl8188eu_active_to_lps(struct rtl8xxxu_priv *priv)
++{
++ struct device *dev = &priv->udev->dev;
++ u8 val8;
++ u16 val16;
++ u32 val32;
++ int retry, retval;
++
++ rtl8xxxu_write8(priv, REG_TXPAUSE, 0x7f);
++
++ retry = 100;
++ retval = -EBUSY;
++ /*
++ * Poll 32 bit wide 0x05f8 for 0x00000000 to ensure no TX is pending.
++ */
++ do {
++ val32 = rtl8xxxu_read32(priv, 0x05f8);
++ if (!val32) {
++ retval = 0;
++ break;
++ }
++ } while (retry--);
++
++ if (!retry) {
++ dev_warn(dev, "Failed to flush TX queue\n");
++ retval = -EBUSY;
++ goto out;
++ }
++
++ /* Disable CCK and OFDM, clock gated */
++ val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
++ val8 &= ~SYS_FUNC_BBRSTB;
++ rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
++
++ udelay(2);
++
++ /* Reset MAC TRX */
++ val16 = rtl8xxxu_read16(priv, REG_CR);
++ val16 &= ~(CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | CR_SECURITY_ENABLE);
++ rtl8xxxu_write16(priv, REG_CR, val8);
++
++ val8 = rtl8xxxu_read8(priv, REG_DUAL_TSF_RST);
++ val8 |= DUAL_TSF_TX_OK;
++ rtl8xxxu_write8(priv, REG_DUAL_TSF_RST, val8);
++
++out:
++ return retval;
++}
++
+ static int rtl8188eu_power_on(struct rtl8xxxu_priv *priv)
+ {
+ u16 val16;
+@@ -1221,6 +1286,69 @@ exit:
+ return ret;
+ }
+
++void rtl8188eu_power_off(struct rtl8xxxu_priv *priv)
++{
++ u8 val8;
++ u16 val16;
++
++ rtl8xxxu_flush_fifo(priv);
++
++ val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
++ val8 &= ~TX_REPORT_CTRL_TIMER_ENABLE;
++ rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
++
++ /* Turn off RF */
++ rtl8xxxu_write8(priv, REG_RF_CTRL, 0x00);
++
++ rtl8188eu_active_to_lps(priv);
++
++ /* Reset Firmware if running in RAM */
++ if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL)
++ rtl8xxxu_firmware_self_reset(priv);
++
++ /* Reset MCU */
++ val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
++ val16 &= ~SYS_FUNC_CPU_ENABLE;
++ rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
++
++ /* Reset MCU ready status */
++ rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00);
++
++ /* 32K_CTRL looks to be very 8188e specific */
++ val8 = rtl8xxxu_read8(priv, REG_32K_CTRL);
++ val8 &= ~BIT(0);
++ rtl8xxxu_write8(priv, REG_32K_CTRL, val8);
++
++ rtl8188eu_active_to_emu(priv);
++ rtl8188eu_emu_to_disabled(priv);
++
++ /* Reset MCU IO Wrapper */
++ val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
++ val8 &= ~BIT(3);
++ rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
++
++ val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
++ val8 |= BIT(3);
++ rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
++
++ /* Vendor driver refers to GPIO_IN */
++ val8 = rtl8xxxu_read8(priv, REG_GPIO_PIN_CTRL);
++ /* Vendor driver refers to GPIO_OUT */
++ rtl8xxxu_write8(priv, REG_GPIO_PIN_CTRL + 1, val8);
++ rtl8xxxu_write8(priv, REG_GPIO_PIN_CTRL + 2, 0xff);
++
++ val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL);
++ rtl8xxxu_write8(priv, REG_GPIO_IO_SEL + 1, val8 << 4);
++ val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL + 1);
++ rtl8xxxu_write8(priv, REG_GPIO_IO_SEL + 1, val8 | 0x0f);
++
++ /*
++ * Set LNA, TRSW, EX_PA Pin to output mode
++ * Referred to as REG_BB_PAD_CTRL in 8188eu vendor driver
++ */
++ rtl8xxxu_write32(priv, REG_PAD_CTRL1, 0x00080808);
++}
++
+ static void rtl8188e_enable_rf(struct rtl8xxxu_priv *priv)
+ {
+ rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
+@@ -1265,7 +1393,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .parse_efuse = rtl8188eu_parse_efuse,
+ .load_firmware = rtl8188eu_load_firmware,
+ .power_on = rtl8188eu_power_on,
+- .power_off = rtl8xxxu_power_off,
++ .power_off = rtl8188eu_power_off,
+ .reset_8051 = rtl8188eu_reset_8051,
+ .llt_init = rtl8xxxu_init_llt_table,
+ .init_phy_bb = rtl8188eu_init_phy_bb,
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
+@@ -413,6 +413,8 @@
+ #define REG_MBIST_START 0x0174
+ #define REG_MBIST_DONE 0x0178
+ #define REG_MBIST_FAIL 0x017c
++/* 8188EU */
++#define REG_32K_CTRL 0x0194
+ #define REG_C2HEVT_MSG_NORMAL 0x01a0
+ /* 8192EU/8723BU/8812 */
+ #define REG_C2HEVT_CMD_ID_8723B 0x01ae
--- /dev/null
+From 3f58ab0fbda16f70e9011089e87474756cf9c329 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Mon, 29 Aug 2016 12:55:37 -0400
+Subject: [PATCH] rtl8xxxu: Add rtl8188eu USB ID for D-Link USB-GO-N150
+
+Received one in the mail yesterday, seems to work like all the other
+8188eu dongles I have.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -6262,6 +6262,9 @@ static struct usb_device_id dev_table[]
+ /* Sitecom rtl8188eus */
+ {USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x0076, 0xff, 0xff, 0xff),
+ .driver_info = (unsigned long)&rtl8188eu_fops},
++/* D-Link USB-GO-N150 */
++{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3311, 0xff, 0xff, 0xff),
++ .driver_info = (unsigned long)&rtl8188eu_fops},
+ /* Still supported by rtlwifi */
+ {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8176, 0xff, 0xff, 0xff),
+ .driver_info = (unsigned long)&rtl8192cu_fops},
--- /dev/null
+From 33b19d32ae77eee805170a5a28220899f76f6ca4 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Mon, 29 Aug 2016 14:27:19 -0400
+Subject: [PATCH] rtl8xxxu: Add additional rtl8188eu shutdown code to match
+ vendor driver
+
+This makes the driver match the poweroff sequence of the vendor driver
+further. However it still doesn't work correctly when reloading the
+driver.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -1347,6 +1347,12 @@ void rtl8188eu_power_off(struct rtl8xxxu
+ * Referred to as REG_BB_PAD_CTRL in 8188eu vendor driver
+ */
+ rtl8xxxu_write32(priv, REG_PAD_CTRL1, 0x00080808);
++
++ rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x00);
++
++ val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO);
++ val16 |= APS_FSMCO_ENABLE_POWERDOWN | APS_FSMCO_HW_POWERDOWN;
++ rtl8xxxu_write16(priv, REG_APS_FSMCO, val16);
+ }
+
+ static void rtl8188e_enable_rf(struct rtl8xxxu_priv *priv)
--- /dev/null
+From c563d5e11eb6d90d6375b0ab7bce0ff1fdc53d1b Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Tue, 30 Aug 2016 13:49:04 -0400
+Subject: [PATCH] rtl8xxxu: Fix off by one error calculating pubq
+
+This was detected tracing the 8188eu driver, but doesn't seem to make
+any difference when using it.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -3882,7 +3882,7 @@ static void rtl8xxxu_init_queue_reserved
+ val32 = (nq << RQPN_NPQ_SHIFT) | (eq << RQPN_EPQ_SHIFT);
+ rtl8xxxu_write32(priv, REG_RQPN_NPQ, val32);
+
+- pubq = fops->total_page_num - hq - lq - nq;
++ pubq = fops->total_page_num - hq - lq - nq - 1;
+
+ val32 = RQPN_LOAD;
+ val32 |= (hq << RQPN_HI_PQ_SHIFT);
--- /dev/null
+From 023b13832fdaeff6d7945036e769f1f16167348f Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Tue, 30 Aug 2016 13:59:01 -0400
+Subject: [PATCH] rtl8xxxu: Add register define used for 8188 IOL magic
+
+This interface seems to be used to send firmware and register init
+files to the firmware.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
+@@ -378,6 +378,11 @@
+ #define PBP_PAGE_SIZE_512 0x3
+ #define PBP_PAGE_SIZE_1024 0x4
+
++/* 8188eu IOL magic */
++#define REG_PKT_BUF_ACCESS_CTRL 0x0106
++#define PKT_BUF_ACCESS_CTRL_TX 0x69
++#define PKT_BUF_ACCESS_CTRL_RX 0xa5
++
+ #define REG_TRXDMA_CTRL 0x010c
+ #define TRXDMA_CTRL_RXDMA_AGG_EN BIT(2)
+ #define TRXDMA_CTRL_VOQ_SHIFT 4
+@@ -451,6 +456,7 @@
+
+ #define REG_FIFOPAGE 0x0204
+ #define REG_TDECTRL 0x0208
++
+ #define REG_TXDMA_OFFSET_CHK 0x020c
+ #define TXDMA_OFFSET_DROP_DATA_EN BIT(9)
+ #define REG_TXDMA_STATUS 0x0210
--- /dev/null
+From 8206e03abfe80c4801d3573bd43252fb37bb69be Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Tue, 30 Aug 2016 14:33:18 -0400
+Subject: [PATCH] rtl8xxxu: Clear SYS_FUNC_UPLL during power up on 8188eu
+
+The vendor driver doesn't set this bit during BB config, so avoid
+setting it here too.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -561,6 +561,7 @@ static void rtl8188eu_init_phy_bb(struct
+ val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+ val16 |= (SYS_FUNC_USBA | SYS_FUNC_USBD |
+ SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB);
++ val16 &= ~SYS_FUNC_UPLL;
+ rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
+
+ rtl8xxxu_init_phy_regs(priv, rtl8188eu_phy_init_table);
--- /dev/null
+From 1cfcfed81b36a64a45a2418c628b2430191ec38a Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Tue, 30 Aug 2016 15:47:05 -0400
+Subject: [PATCH] rtl8xxxu: Early enable of WEP/TKIP security on 8188eu
+
+This matches action taken in the vendor driver, however it is unclear
+why this is done.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -1394,6 +1394,9 @@ static void rtl8188e_usb_quirks(struct r
+ val32 = rtl8xxxu_read32(priv, REG_TXDMA_OFFSET_CHK);
+ val32 |= TXDMA_OFFSET_DROP_DATA_EN;
+ rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, val32);
++
++ /* Pre-TX enable WEP/TKIP security */
++ rtl8xxxu_write8(priv, REG_EARLY_MODE_CONTROL_8188E + 3, 0x01);
+ }
+
+ struct rtl8xxxu_fileops rtl8188eu_fops = {
--- /dev/null
+From 503e2c16e21b49e912bcbe6af5cda34b65e30502 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Tue, 30 Aug 2016 17:23:35 -0400
+Subject: [PATCH] rtl8xxxu: Correct power down sequence for 8188eu
+
+This matches the vendor driver more correctly
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 26 ++++++++++++++++------
+ 1 file changed, 19 insertions(+), 7 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -1083,7 +1083,8 @@ static void rtl8188e_disabled_to_emu(str
+ u16 val16;
+
+ val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO);
+- val16 &= ~(APS_FSMCO_PFM_WOWL | APS_FSMCO_ENABLE_POWERDOWN);
++ val16 &= ~(APS_FSMCO_PFM_WOWL | APS_FSMCO_ENABLE_POWERDOWN |
++ APS_FSMCO_HW_POWERDOWN);
+ rtl8xxxu_write16(priv, REG_APS_FSMCO, val16);
+ }
+
+@@ -1196,15 +1197,26 @@ static int rtl8188eu_emu_to_disabled(str
+ {
+ u8 val8;
+
+- /* 0x04[12:11] = 01 enable WL suspend */
+- val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2);
+- val8 &= ~BIT(0);
+- rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8);
++ val8 = rtl8xxxu_read8(priv, REG_AFE_XTAL_CTRL + 2);
++ val8 |= BIT(7);
++ rtl8xxxu_write8(priv, REG_AFE_XTAL_CTRL + 2, val8);
+
+ val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+- val8 |= BIT(7);
++ val8 &= ~(BIT(3) | BIT(4));
++ val8 |= BIT(3);
+ rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
++ rtl8xxxu_write8(priv, REG_APS_FSMCO + 3, 0x00);
++
++ val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG + 1);
++ val8 &= ~BIT(4);
++ rtl8xxxu_write8(priv, REG_GPIO_MUXCFG + 1, val8);
++
++ /* Set USB suspend enable local register 0xfe10[4]=1 */
++ val8 = rtl8xxxu_read8(priv, 0xfe10);
++ val8 |= BIT(4);
++ rtl8xxxu_write8(priv, 0xfe10, val8);
++
+ return 0;
+ }
+
+@@ -1339,7 +1351,7 @@ void rtl8188eu_power_off(struct rtl8xxxu
+ rtl8xxxu_write8(priv, REG_GPIO_PIN_CTRL + 2, 0xff);
+
+ val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL);
+- rtl8xxxu_write8(priv, REG_GPIO_IO_SEL + 1, val8 << 4);
++ rtl8xxxu_write8(priv, REG_GPIO_IO_SEL, val8 << 4);
+ val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL + 1);
+ rtl8xxxu_write8(priv, REG_GPIO_IO_SEL + 1, val8 | 0x0f);
+
--- /dev/null
+From 8953c3173a1b365db19346f31857c10c1439e281 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Tue, 30 Aug 2016 17:30:14 -0400
+Subject: [PATCH] rtl8xxxu: Reset 8188eu REG_GPIO_MUXCFG on power off
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -1363,6 +1363,8 @@ void rtl8188eu_power_off(struct rtl8xxxu
+
+ rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x00);
+
++ rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, 0x00000000);
++
+ val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO);
+ val16 |= APS_FSMCO_ENABLE_POWERDOWN | APS_FSMCO_HW_POWERDOWN;
+ rtl8xxxu_write16(priv, REG_APS_FSMCO, val16);
--- /dev/null
+From 19caed8a5ff27226e22f95a6c082a093c0b7b23f Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 31 Aug 2016 16:31:38 -0400
+Subject: [PATCH] rtl8xxxu: Handle devices with a smaller LLT buffer
+
+The 8188e (except for I cut parts) seem to have a smaller LLT buffer
+than all other known devices.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 1 +
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 1 +
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 11 ++++++++---
+ 3 files changed, 10 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+@@ -1409,6 +1409,7 @@ struct rtl8xxxu_fileops {
+ u8 page_num_hi;
+ u8 page_num_lo;
+ u8 page_num_norm;
++ u8 last_llt_entry;
+ };
+
+ extern int rtl8xxxu_debug;
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -1454,4 +1454,5 @@ struct rtl8xxxu_fileops rtl8188eu_fops =
+ .page_num_hi = TX_PAGE_NUM_HI_PQ_8188E,
+ .page_num_lo = TX_PAGE_NUM_LO_PQ_8188E,
+ .page_num_norm = TX_PAGE_NUM_NORM_PQ_8188E,
++ .last_llt_entry = 176,
+ };
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+@@ -2485,11 +2485,16 @@ static int rtl8xxxu_llt_write(struct rtl
+ int rtl8xxxu_init_llt_table(struct rtl8xxxu_priv *priv)
+ {
+ int ret;
+- int i;
++ int i, last_entry;
+ u8 last_tx_page;
+
+ last_tx_page = priv->fops->total_page_num;
+
++ if (priv->fops->last_llt_entry)
++ last_entry = priv->fops->last_llt_entry;
++ else
++ last_entry = 255;
++
+ for (i = 0; i < last_tx_page; i++) {
+ ret = rtl8xxxu_llt_write(priv, i, i + 1);
+ if (ret)
+@@ -2501,14 +2506,14 @@ int rtl8xxxu_init_llt_table(struct rtl8x
+ goto exit;
+
+ /* Mark remaining pages as a ring buffer */
+- for (i = last_tx_page + 1; i < 0xff; i++) {
++ for (i = last_tx_page + 1; i < last_entry; i++) {
+ ret = rtl8xxxu_llt_write(priv, i, (i + 1));
+ if (ret)
+ goto exit;
+ }
+
+ /* Let last entry point to the start entry of ring buffer */
+- ret = rtl8xxxu_llt_write(priv, 0xff, last_tx_page + 1);
++ ret = rtl8xxxu_llt_write(priv, last_entry, last_tx_page + 1);
+ if (ret)
+ goto exit;
+
--- /dev/null
+From a1967ad244697b2929e462b0579932431387f489 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Tue, 13 Sep 2016 15:13:08 -0400
+Subject: [PATCH] rtl8xxxu: Write correct value to REG_CR in
+ rtl8188eu_active_to_lps()
+
+Stupid bug writing the wrong value to register REG_CR.
+
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -1259,7 +1259,7 @@ static int rtl8188eu_active_to_lps(struc
+ /* Reset MAC TRX */
+ val16 = rtl8xxxu_read16(priv, REG_CR);
+ val16 &= ~(CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | CR_SECURITY_ENABLE);
+- rtl8xxxu_write16(priv, REG_CR, val8);
++ rtl8xxxu_write16(priv, REG_CR, val16);
+
+ val8 = rtl8xxxu_read8(priv, REG_DUAL_TSF_RST);
+ val8 |= DUAL_TSF_TX_OK;
--- /dev/null
+From 81e308a3678706670e237501e02b0ea2c7029c94 Mon Sep 17 00:00:00 2001
+From: Jes Sorensen <Jes.Sorensen@redhat.com>
+Date: Wed, 14 Sep 2016 14:10:42 -0400
+Subject: [PATCH] rtl8xxxu: Fix reloading of driver for 8188eu devices
+
+For 8188eu, once the MAC is asked to power down by setting
+APS_FSMCO_MAC_OFF, there seems to be no way to bring it back to life.
+
+In addition, only disable RF_ENABLE in RF_CTRL rather than all bits.
+
+This was spotted by Andrea Merello who noticed that if we dropped the
+call to rtl8188eu_active_to_emu() reloading started working.
+
+Reported-by: Andrea Merello <andrea.merello@gmail.com>
+Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
+---
+ .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 29 +++++-----------------
+ 1 file changed, 6 insertions(+), 23 deletions(-)
+
+--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
++++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c
+@@ -1160,37 +1160,18 @@ exit:
+ static int rtl8188eu_active_to_emu(struct rtl8xxxu_priv *priv)
+ {
+ u8 val8;
+- int count, ret = 0;
+
+ /* Turn off RF */
+- rtl8xxxu_write8(priv, REG_RF_CTRL, 0);
++ val8 = rtl8xxxu_read8(priv, REG_RF_CTRL);
++ val8 &= ~RF_ENABLE;
++ rtl8xxxu_write8(priv, REG_RF_CTRL, val8);
+
+ /* LDO Sleep mode */
+ val8 = rtl8xxxu_read8(priv, REG_LPLDO_CTRL);
+ val8 |= BIT(4);
+ rtl8xxxu_write8(priv, REG_LPLDO_CTRL, val8);
+
+- /* 0x0005[1] = 1 turn off MAC by HW state machine*/
+- val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+- val8 |= BIT(1);
+- rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+-
+- for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+- val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+- if ((val8 & BIT(1)) == 0)
+- break;
+- udelay(10);
+- }
+-
+- if (!count) {
+- dev_warn(&priv->udev->dev, "%s: Disabling MAC timed out\n",
+- __func__);
+- ret = -EBUSY;
+- goto exit;
+- }
+-
+-exit:
+- return ret;
++ return 0;
+ }
+
+ static int rtl8188eu_emu_to_disabled(struct rtl8xxxu_priv *priv)
+@@ -1372,6 +1353,8 @@ void rtl8188eu_power_off(struct rtl8xxxu
+
+ static void rtl8188e_enable_rf(struct rtl8xxxu_priv *priv)
+ {
++ rtl8xxxu_write8(priv, REG_RF_CTRL, RF_ENABLE | RF_RSTB | RF_SDMRSTB);
++
+ rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
+ }
+
projects / openwrt / staging / rmilecki.git / commitdiff