BUILD_DEVICES:=sun7i-a20-lamobo-r1
endef
+define U-Boot/orangepi_r1
+ BUILD_SUBTARGET:=cortexa7
+ NAME:=Orange Pi R1 (H2+)
+ BUILD_DEVICES:=sun8i-h2-plus-orangepi-r1
+endef
+
define U-Boot/orangepi_plus
BUILD_SUBTARGET:=cortexa7
NAME:=Orange Pi Plus (H3)
Linksprite_pcDuino \
Linksprite_pcDuino3 \
Lamobo_R1 \
+ orangepi_r1 \
orangepi_plus \
pangolin \
pine64_plus
--- /dev/null
+From 1f92596cc520f760589289059a5aa739366dd19c Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Tue, 26 Sep 2017 22:16:59 +0200
+Subject: sunxi: add device tree for Orange Pi R1 board
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/arm/dts/Makefile | 1 +
+ arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts | 157 +++++++++++++++++++++++++++++
+ 2 files changed, 158 insertions(+)
+ create mode 100644 arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts
+
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -310,6 +310,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \
+ sun8i-a83t-cubietruck-plus.dtb \
+ sun8i-a83t-sinovoip-bpi-m3.dtb
+ dtb-$(CONFIG_MACH_SUN8I_H3) += \
++ sun8i-h2-plus-orangepi-r1.dtb \
+ sun8i-h2-plus-orangepi-zero.dtb \
+ sun8i-h3-bananapi-m2-plus.dtb \
+ sun8i-h3-orangepi-2.dtb \
+--- /dev/null
++++ b/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts
+@@ -0,0 +1,157 @@
++/*
++ * Copyright (C) 2017 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Based on sun8i-h2-plus-orangepi-zero.dts, which is:
++ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
++ *
++ * Based on sun8i-h3-orangepi-one.dts, which is:
++ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++#include "sun8i-h3.dtsi"
++#include "sunxi-common-regulators.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/pinctrl/sun4i-a10.h>
++
++/ {
++ model = "Xunlong Orange Pi R1";
++ compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
++
++ aliases {
++ serial0 = &uart0;
++ /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
++ ethernet1 = &xr819;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ pwr_led {
++ label = "orangepi:green:pwr";
++ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
++ default-state = "on";
++ };
++
++ status_led {
++ label = "orangepi:red:status";
++ gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
++ reg_vcc_wifi: reg_vcc_wifi {
++ compatible = "regulator-fixed";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-wifi";
++ enable-active-high;
++ gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
++ };
++
++ wifi_pwrseq: wifi_pwrseq {
++ compatible = "mmc-pwrseq-simple";
++ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
++ };
++};
++
++&ehci1 {
++ status = "okay";
++};
++
++&emac {
++ phy = <&phy1>;
++ phy-mode = "mii";
++ allwinner,use-internal-phy;
++ allwinner,leds-active-low;
++ status = "okay";
++ phy1: ethernet-phy@1 {
++ reg = <1>;
++ };
++};
++
++&mmc0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc0_pins_a>;
++ vmmc-supply = <®_vcc3v3>;
++ bus-width = <4>;
++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
++ cd-inverted;
++ status = "okay";
++};
++
++&mmc1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc1_pins_a>;
++ vmmc-supply = <®_vcc_wifi>;
++ mmc-pwrseq = <&wifi_pwrseq>;
++ bus-width = <4>;
++ non-removable;
++ status = "okay";
++
++ /*
++ * Explicitly define the sdio device, so that we can add an ethernet
++ * alias for it (which e.g. makes u-boot set a mac-address).
++ */
++ xr819: sdio_wifi@1 {
++ reg = <1>;
++ };
++};
++
++&ohci1 {
++ status = "okay";
++};
++
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins_a>;
++ status = "okay";
++};
++
++&usbphy {
++ /* USB VBUS is always on */
++ status = "okay";
++};
--- /dev/null
+From 231201c71b902b5999ed9b143f2a54674cfae88a Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Tue, 26 Sep 2017 22:17:33 +0200
+Subject: sunxi: add orangepi R1 defconfig
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ board/sunxi/MAINTAINERS | 5 +++++
+ configs/orangepi_r1_defconfig | 19 +++++++++++++++++++
+ 2 files changed, 24 insertions(+)
+ create mode 100644 configs/orangepi_r1_defconfig
+
+--- a/board/sunxi/MAINTAINERS
++++ b/board/sunxi/MAINTAINERS
+@@ -302,6 +302,11 @@ M: Jagan Teki <jagan@amarulasolutions.co
+ S: Maintained
+ F: configs/orangepi_prime_defconfig
+
++ORANGEPI R1 BOARD
++M: Hauke Mehrtens <hauke@hauke-m.de>
++S: Maintained
++F: configs/orangepi_r1_defconfig
++
+ PINE64 BOARDS
+ M: Andre Przywara <andre.przywara@arm.com>
+ S: Maintained
+--- /dev/null
++++ b/configs/orangepi_r1_defconfig
+@@ -0,0 +1,19 @@
++CONFIG_ARM=y
++CONFIG_ARCH_SUNXI=y
++CONFIG_SPL_SPI_FLASH_SUPPORT=y
++CONFIG_MACH_SUN8I_H3=y
++CONFIG_DRAM_CLK=624
++CONFIG_DRAM_ZQ=3881979
++CONFIG_DRAM_ODT_EN=y
++# CONFIG_VIDEO_DE2 is not set
++CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-orangepi-r1"
++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
++CONFIG_CONSOLE_MUX=y
++CONFIG_SPL=y
++# CONFIG_CMD_IMLS is not set
++# CONFIG_CMD_FLASH is not set
++# CONFIG_CMD_FPGA is not set
++CONFIG_SPL_SPI_SUNXI=y
++CONFIG_SUN8I_EMAC=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
TARGET_DEVICES += sun6i-a31-m9
+define Device/sun8i-h2-plus-orangepi-r1
+ DEVICE_TITLE:=Xunlong Orange Pi R1
+ DEVICE_PACKAGES:=kmod-rtc-sunxi kmod-usb-net kmod-usb-net-rtl8152
+ SUPPORTED_DEVICES:=xunlong,orangepi-r1
+ SUNXI_DTS:=sun8i-h2-plus-orangepi-r1
+endef
+
+TARGET_DEVICES += sun8i-h2-plus-orangepi-r1
+
+
define Device/sun8i-h3-orangepi-plus
DEVICE_TITLE:=Xunlong Orange Pi Plus
DEVICE_PACKAGES:=kmod-rtc-sunxi
--- /dev/null
+From daf75255fb67bf44db178e4c95a803b7972ed670 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Tue, 26 Sep 2017 22:29:06 +0200
+Subject: ARM: dts: sunxi: add support for Orange Pi R1 board
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts | 171 ++++++++++++++++++++++++
+ 2 files changed, 172 insertions(+)
+ create mode 100644 arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -819,6 +819,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
+ sun8i-a33-sinlinx-sina33.dtb \
+ sun8i-a83t-allwinner-h8homlet-v2.dtb \
+ sun8i-a83t-cubietruck-plus.dtb \
++ sun8i-h2-plus-orangepi-r1.dtb \
+ sun8i-h3-bananapi-m2-plus.dtb \
+ sun8i-h3-nanopi-neo.dtb \
+ sun8i-h3-orangepi-2.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts
+@@ -0,0 +1,171 @@
++/*
++ * Copyright (C) 2017 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Based on sun8i-h2-plus-orangepi-zero.dts, which is:
++ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
++ *
++ * Based on sun8i-h3-orangepi-one.dts, which is:
++ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++#include "sun8i-h3.dtsi"
++#include "sunxi-common-regulators.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/pinctrl/sun4i-a10.h>
++
++/ {
++ model = "Xunlong Orange Pi R1";
++ compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
++
++ aliases {
++ serial0 = &uart0;
++ /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
++ ethernet0 = &emac;
++ ethernet1 = &xr819;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ pwr_led {
++ label = "orangepi:green:pwr";
++ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
++ default-state = "on";
++ };
++
++ status_led {
++ label = "orangepi:red:status";
++ gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
++ reg_vcc_wifi: reg_vcc_wifi {
++ compatible = "regulator-fixed";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-wifi";
++ enable-active-high;
++ gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
++ };
++
++ wifi_pwrseq: wifi_pwrseq {
++ compatible = "mmc-pwrseq-simple";
++ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
++ post-power-on-delay-ms = <200>;
++ };
++};
++
++&ehci1 {
++ status = "okay";
++};
++
++&emac {
++ phy-handle = <&int_mii_phy>;
++ phy-mode = "mii";
++ allwinner,leds-active-low;
++ status = "okay";
++};
++
++&mmc0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc0_pins_a>;
++ vmmc-supply = <®_vcc3v3>;
++ bus-width = <4>;
++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
++ cd-inverted;
++ status = "okay";
++};
++
++&mmc1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc1_pins_a>;
++ vmmc-supply = <®_vcc_wifi>;
++ mmc-pwrseq = <&wifi_pwrseq>;
++ bus-width = <4>;
++ non-removable;
++ status = "okay";
++
++ /*
++ * Explicitly define the sdio device, so that we can add an ethernet
++ * alias for it (which e.g. makes u-boot set a mac-address).
++ */
++ xr819: sdio_wifi@1 {
++ reg = <1>;
++ };
++};
++
++&mmc1_pins_a {
++ bias-pull-up;
++};
++
++&ohci1 {
++ status = "okay";
++};
++
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins_a>;
++ status = "okay";
++};
++
++&uart1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart1_pins>;
++ status = "disabled";
++};
++
++&uart2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart2_pins>;
++ status = "disabled";
++};
++
++&usbphy {
++ /* USB VBUS is always on */
++ status = "okay";
++};
projects / openwrt / staging / lynxis.git / commitdiff