ramips: add support for ZyXEL Keenetic Omni / Omni II

Factory image can be installed via Zyxel WebUI.

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 99720391a0d5c0568ca5656db2e7857d0daafb71..4a7b9f69c7d1b40dc38acb84429f07bbd9683235 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -207,6 +207,8 @@ ht-tm02)
        ucidef_set_led_netdev "eth" "Ethernet" "$board:green:lan" "eth0"
        set_wifi_led "$board:blue:wlan"
        ;;
+kn_rc|\
+kn_rf|\
 kng_rc)
        set_usb_led "$board:green:usb"
        set_wifi_led "$board:green:wifi"

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 2af5c45d8af458d71c02b4d66f3bda27f30c8d53..63bf123b73ea91d1c434e09ccf386d20372ffec8 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -203,6 +203,11 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0"
                ;;
+       kn_rc|\
+       kn_rf)
+               ucidef_add_switch "switch" \
+                       "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6@eth0"
+               ;;
        kng_rc)
                ucidef_add_switch "switch1" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "7t@eth0"

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index abbe147d840332c36916176b4837b04765dc2755..0b0b8d9777fb96f0b33b204cd6930237a113d653 100644 (file)
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -24,6 +24,8 @@ get_status_led() {
        dir-860l-b1|\
        e1700|\
        fonera20n|\
+       kn_rc|\
+       kn_rf|\
        kng_rc|\
        mzk-750dhp|\
        mzk-dp150n|\

diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 3793e5824ffd32a9113d3c0e101f6915ae144492..cc6f00fd558a08e3ba407404f3f27f6da8c25c10 100755 (executable)
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -595,6 +595,12 @@ ramips_board_detect() {
        *"ZBT-WR8305RT")
                name="zbt-wr8305rt"
                ;;
+       *"ZyXEL Keenetic Omni")
+               name="kn_rc"
+               ;;
+       *"ZyXEL Keenetic Omni II")
+               name="kn_rf"
+               ;;
        *"ZyXEL Keenetic Viva")
                name="kng_rc"
                ;;

diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 3c1fb4168cd23fb21bdf7d4b288c3427a53d6a38..2151cf945c8bbee8af0c7175d148e388ef70484e 100755 (executable)
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -71,6 +71,8 @@ platform_check_image() {
        jhr-n805r|\
        jhr-n825r|\
        jhr-n926r|\
+       kn_rc|\
+       kn_rf|\
        kng_rc|\
        linkits7688|\
        linkits7688d|\

diff --git a/target/linux/ramips/dts/kn_rc.dts b/target/linux/ramips/dts/kn_rc.dts
new file mode 100644 (file)
index 0000000..c63c1a3
--- /dev/null
+++ b/target/linux/ramips/dts/kn_rc.dts
@@ -0,0 +1,120 @@
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "ZyXEL Keenetic Omni";
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               wan {
+                       label = "kn_rc:green:wan";
+                       gpios = <&gpio0 38 GPIO_ACTIVE_LOW>;
+               };
+
+               usb {
+                       label = "kn_rc:green:usb";
+                       gpios = <&gpio0 39 GPIO_ACTIVE_LOW>;
+               };
+
+               wifi {
+                       label = "kn_rc:green:wifi";
+                       gpios = <&gpio0 72 GPIO_ACTIVE_LOW>;
+               };
+
+               power {
+                       label = "kn_rc:green:power";
+                       gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+
+               fn {
+                       label = "fn";
+                       gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+               };
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x7b0000>;
+               };
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "wdt", "pa", "spi refclk", "wled";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x4>;
+       ralink,port-map = "wllll";
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+       status = "okay";
+};
+
+&ohci {
+       status = "okay";
+};

diff --git a/target/linux/ramips/dts/kn_rf.dts b/target/linux/ramips/dts/kn_rf.dts
new file mode 100644 (file)
index 0000000..22b16b0
--- /dev/null
+++ b/target/linux/ramips/dts/kn_rf.dts
@@ -0,0 +1,120 @@
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "ZyXEL Keenetic Omni II";
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               wan {
+                       label = "kn_rc:green:wan";
+                       gpios = <&gpio0 38 GPIO_ACTIVE_LOW>;
+               };
+
+               usb {
+                       label = "kn_rc:green:usb";
+                       gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+               };
+
+               wifi {
+                       label = "kn_rc:green:wifi";
+                       gpios = <&gpio0 72 GPIO_ACTIVE_LOW>;
+               };
+
+               power {
+                       label = "kn_rc:green:power";
+                       gpios = <&gpio0 39 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+
+               fn {
+                       label = "fn";
+                       gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+               };
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x7b0000>;
+               };
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "wdt", "pa", "spi refclk", "wled";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x4>;
+       ralink,port-map = "wllll";
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+       status = "okay";
+};
+
+&ohci {
+       status = "okay";
+};

diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 3f81d778323134daeefd22529b7cf6898e1e2776..0bd6c9dcd80441d75517e32e9c04845027f9dbfe 100644 (file)
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -430,6 +430,26 @@ define Device/dch-m225
 endef
 TARGET_DEVICES += dch-m225
 
+define Device/kn_rc
+  DTS := kn_rc
+  DEVICE_TITLE := ZyXEL Keenetic Omni
+  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
+  IMAGES += factory.bin
+  IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | check-size $$$$(IMAGE_SIZE) | \
+       zyimage -d 4882 -v "ZyXEL Keenetic Omni"
+endef
+TARGET_DEVICES += kn_rc
+
+define Device/kn_rf
+  DTS := kn_rf
+  DEVICE_TITLE := ZyXEL Keenetic Omni II
+  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
+  IMAGES += factory.bin
+  IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | check-size $$$$(IMAGE_SIZE) | \
+       zyimage -d 2102034 -v "ZyXEL Keenetic Omni II"
+endef
+TARGET_DEVICES += kn_rf
+
 define Device/kng_rc
   DTS := kng_rc
   IMAGE_SIZE := $(ralink_default_fw_size_16M)