From: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Date: Mon, 30 Jan 2017 13:52:25 +0000 (+0100)
Subject: batman-adv: Remove non-existing setting "vis_mode"
X-Git-Url: http://git.openwrt.org/?p=feed%2Frouting.git;a=commitdiff_plain;h=8a66ed185709df5b9120e602fda760969bebd632

batman-adv: Remove non-existing setting "vis_mode"

There is no vis_mode in the batman-adv kernel module since batman-adv
2014.0.0. So don't expose such a setting in uci.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
---

diff --git a/batman-adv/files/etc/config/batman-adv b/batman-adv/files/etc/config/batman-adv
index f38855e..97be622 100644
--- a/batman-adv/files/etc/config/batman-adv
+++ b/batman-adv/files/etc/config/batman-adv
@@ -9,7 +9,6 @@ config 'mesh' 'bat0'
 	option 'gw_sel_class'
 	option 'log_level'
 	option 'orig_interval'
-	option 'vis_mode'
 	option 'bridge_loop_avoidance'
 	option 'distributed_arp_table'
 	option 'multicast_mode'
diff --git a/batman-adv/files/lib/batman-adv/config.sh b/batman-adv/files/lib/batman-adv/config.sh
index e46628c..3a746a3 100644
--- a/batman-adv/files/lib/batman-adv/config.sh
+++ b/batman-adv/files/lib/batman-adv/config.sh
@@ -13,7 +13,7 @@ bat_config()
 	local mesh="$1"
 	local aggregated_ogms ap_isolation bonding bridge_loop_avoidance distributed_arp_table fragmentation
 	local gw_bandwidth gw_mode gw_sel_class isolation_mark hop_penalty multicast_mode network_coding log_level
-	local orig_interval vis_mode
+	local orig_interval
 
 	config_get aggregated_ogms "$mesh" aggregated_ogms
 	config_get ap_isolation "$mesh" ap_isolation
@@ -30,7 +30,6 @@ bat_config()
 	config_get network_coding "$mesh" network_coding
 	config_get log_level "$mesh" log_level
 	config_get orig_interval "$mesh" orig_interval
-	config_get vis_mode "$mesh" vis_mode
 
 	[ ! -f "/sys/class/net/$mesh/mesh/orig_interval" ] && echo "batman-adv mesh $mesh does not exist - check your interface configuration" && return 1
 
@@ -49,5 +48,4 @@ bat_config()
 	[ -n "$network_coding" ] && echo $network_coding > /sys/class/net/$mesh/mesh/network_coding 2>&-
 	[ -n "$log_level" ] && echo $log_level > /sys/class/net/$mesh/mesh/log_level 2>&-
 	[ -n "$orig_interval" ] && echo $orig_interval > /sys/class/net/$mesh/mesh/orig_interval
-	[ -n "$vis_mode" ] && echo $vis_mode > /sys/class/net/$mesh/mesh/vis_mode
 }