From f096accce26bc46831e859ccd40b3f88e404cc7e Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Mon, 23 Nov 2020 13:41:34 +0100 Subject: [PATCH] ath79: add support for OpenMesh OM2P-HS v2 Device specifications: ====================== * Qualcomm/Atheros AR9341 rev 1 * 535/400/200 MHz (CPU/DDR/AHB) * 64 MB of RAM * 16 MB of SPI NOR flash - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 2x 10/100 Mbps Ethernet * 2T2R 2.4 GHz Wi-Fi * 6x GPIO-LEDs (3x wifi, 2x ethernet, 1x power) * 1x GPIO-button (reset) * external h/w watchdog (enabled by default) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x fast ethernet - eth0 + 802.3af POE + builtin switch port 1 + used as LAN interface - eth1 + 18-24V passive POE (mode B) + used as WAN interface * 12-24V 1A DC * internal antennas Flashing instructions: ====================== Various methods can be used to install the actual image on the flash. Two easy ones are: ap51-flash ---------- The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the image to the u-boot when the device boots up. initramfs from TFTP ------------------- The serial console must be used to access the u-boot shell during bootup. It can then be used to first boot up the initramfs image from a TFTP server (here with the IP 192.168.1.21): setenv serverip 192.168.1.21 setenv ipaddr 192.168.1.1 tftpboot 0c00000 .bin && bootm $fileaddr The actual sysupgrade image can then be transferred (on the LAN port) to the device via scp .bin root@192.168.1.1:/tmp/ On the device, the sysupgrade must then be started using sysupgrade -n /tmp/.bin Signed-off-by: Sven Eckelmann --- package/boot/uboot-envtools/Makefile | 2 +- package/boot/uboot-envtools/files/ath79 | 1 + target/linux/ath79/dts/ar9341_openmesh_om2p-hs-v2.dts | 8 ++++++++ .../linux/ath79/generic/base-files/etc/board.d/01_leds | 1 + .../ath79/generic/base-files/lib/upgrade/platform.sh | 1 + target/linux/ath79/image/generic.mk | 9 +++++++++ 6 files changed, 21 insertions(+), 1 deletion(-) create mode 100644 target/linux/ath79/dts/ar9341_openmesh_om2p-hs-v2.dts diff --git a/package/boot/uboot-envtools/Makefile b/package/boot/uboot-envtools/Makefile index 3493332cee..85a67c1ac3 100644 --- a/package/boot/uboot-envtools/Makefile +++ b/package/boot/uboot-envtools/Makefile @@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk PKG_NAME:=uboot-envtools PKG_DISTNAME:=u-boot PKG_VERSION:=2020.04 -PKG_RELEASE:=12 +PKG_RELEASE:=13 PKG_SOURCE:=$(PKG_DISTNAME)-$(PKG_VERSION).tar.bz2 PKG_SOURCE_URL:= \ diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79 index bc69d35c96..212143f49b 100644 --- a/package/boot/uboot-envtools/files/ath79 +++ b/package/boot/uboot-envtools/files/ath79 @@ -87,6 +87,7 @@ netgear,wndr4300sw) ;; openmesh,om2p-v4|\ openmesh,om2p-hs-v1|\ +openmesh,om2p-hs-v2|\ openmesh,om2p-hs-v4|\ plasmacloud,pa300|\ plasmacloud,pa300e) diff --git a/target/linux/ath79/dts/ar9341_openmesh_om2p-hs-v2.dts b/target/linux/ath79/dts/ar9341_openmesh_om2p-hs-v2.dts new file mode 100644 index 0000000000..819a6be97f --- /dev/null +++ b/target/linux/ath79/dts/ar9341_openmesh_om2p-hs-v2.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar9341_openmesh_om2p-hs.dtsi" + +/ { + compatible = "openmesh,om2p-hs-v2", "qca,ar9341"; + model = "OpenMesh OM2P-HS v2"; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 057bec3bc8..8926ffc0c8 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -146,6 +146,7 @@ comfast,cf-e560ac) ;; comfast,cf-ew72|\ openmesh,om2p-hs-v1|\ +openmesh,om2p-hs-v2|\ telco,t1) ucidef_set_led_switch "lan" "LAN" "blue:lan" "switch0" "0x02" ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1" diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh index e3298cfc13..73c328173a 100644 --- a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh +++ b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh @@ -52,6 +52,7 @@ platform_do_upgrade() { ;; openmesh,om2p-v4|\ openmesh,om2p-hs-v1|\ + openmesh,om2p-hs-v2|\ openmesh,om2p-hs-v4) PART_NAME="inactive" platform_do_upgrade_openmesh "$1" diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 1454c14e44..4e80ac8402 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -1586,6 +1586,15 @@ define Device/openmesh_om2p-hs-v1 endef TARGET_DEVICES += openmesh_om2p-hs-v1 +define Device/openmesh_om2p-hs-v2 + $(Device/openmesh_om2p-common) + SOC := ar9341 + DEVICE_MODEL := OM2P-HS + DEVICE_VARIANT := v2 + SUPPORTED_DEVICES += om2p-hsv2 +endef +TARGET_DEVICES += openmesh_om2p-hs-v2 + define Device/openmesh_om2p-hs-v4 $(Device/openmesh_om2p-common) SOC := qca9533 -- 2.30.2