From ce6c9e0328a563082d12397068fbf2eb2a227d24 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Tue, 25 Oct 2022 09:12:16 +0200 Subject: [PATCH] ipq40xx: utilize nvmem-cells for plasmacloud,pa2200 MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit The calibration data and mac addresses on this device are stored in the 0:ART partition. It is therefore possible to move the code to handle them directly to the devicetree instead of the various scripts. But the actual relevant information about the partition layout is provided by the bootloader via bootargs (mtdparts) and not via the devicetree itself. Instead of using a fixed-partition template, the mtd dynamic partitions support from the upstream kernel is used. Reported-by: Robert Marko Tested-by: Michaël BILCOT Signed-off-by: Sven Eckelmann --- .../etc/hotplug.d/firmware/11-ath10k-caldata | 9 +---- .../arch/arm/boot/dts/qcom-ipq4019-pa2200.dts | 38 +++++++++++++++++++ 2 files changed, 40 insertions(+), 7 deletions(-) diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 246bc6ca21..7498e1c710 100644 --- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -34,9 +34,6 @@ case "$FIRMWARE" in /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \ /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") ;; - plasmacloud,pa2200) - caldata_extract "0:ART" 0x9000 0x2f20 - ;; linksys,ea8300 |\ linksys,mr8300) caldata_extract "ART" 0x9000 0x2f20 @@ -75,8 +72,7 @@ case "$FIRMWARE" in /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \ /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") ;; - cellc,rtl30vw |\ - plasmacloud,pa2200) + cellc,rtl30vw) caldata_extract "0:ART" 0x1000 0x2f20 ;; devolo,magic-2-wifi-next) @@ -169,8 +165,7 @@ case "$FIRMWARE" in /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \ /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") ;; - cellc,rtl30vw |\ - plasmacloud,pa2200) + cellc,rtl30vw) caldata_extract "0:ART" 0x5000 0x2f20 ;; devolo,magic-2-wifi-next) diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-pa2200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-pa2200.dts index 461f05bc73..d7dcf053be 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-pa2200.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-pa2200.dts @@ -140,7 +140,36 @@ compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <24000000>; + /* partitions are passed via bootloader */ + partitions { + partition-art { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + label = "0:ART"; + + precal_art_1000: precal@1000 { + reg = <0x1000 0x2f20>; + }; + + precal_art_5000: precal@5000 { + reg = <0x5000 0x2f20>; + }; + + precal_art_9000: precal@9000 { + reg = <0x9000 0x2f20>; + }; + + macaddr_gmac0: macaddr@0 { + reg = <0x0 0x6>; + }; + + macaddr_gmac1: macaddr@6 { + reg = <0x6 0x6>; + }; + }; + }; }; }; @@ -171,6 +200,9 @@ reg = <0x00010000 0 0 0 0>; qcom,ath10k-calibration-variant = "PlasmaCloud-PA2200"; ieee80211-freq-limit = <5170000 5350000>; + + nvmem-cell-names = "pre-calibration"; + nvmem-cells = <&precal_art_9000>; }; }; }; @@ -178,10 +210,16 @@ &wifi0 { status = "okay"; qcom,ath10k-calibration-variant = "PlasmaCloud-PA2200"; + + nvmem-cell-names = "pre-calibration"; + nvmem-cells = <&precal_art_1000>; }; &wifi1 { status = "okay"; qcom,ath10k-calibration-variant = "PlasmaCloud-PA2200"; ieee80211-freq-limit = <5470000 5875000>; + + nvmem-cell-names = "pre-calibration"; + nvmem-cells = <&precal_art_5000>; }; -- 2.30.2