From 4b31717fb031e6b99f476e79b5e8b3d6a8b0b9ff Mon Sep 17 00:00:00 2001 From: Sander Vanheule Date: Sun, 20 Feb 2022 16:25:42 +0100 Subject: [PATCH] realtek: move RTL8231 definitions to board files The RTL8231 is an external chip, and not part of the SoC. That means it is more appropriate to define it in the board specific (base) files, instead of the DT include for the SoC itself. Moving the RTL8231 definition also ensures that boards with no GPIO expander, or an alternative one, don't have a useless gpio1 node label defined. Tested on a Netgear GS110TPPv1. Signed-off-by: Sander Vanheule --- .../dts-5.10/rtl8380_netgear_gigabit.dtsi | 11 ++++++----- .../realtek/dts-5.10/rtl8380_zyxel_gs1900.dtsi | 17 ++++++++++------- .../dts-5.10/rtl8382_d-link_dgs-1210-10p.dts | 7 +++++++ target/linux/realtek/dts-5.10/rtl838x.dtsi | 9 --------- 4 files changed, 23 insertions(+), 21 deletions(-) diff --git a/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit.dtsi b/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit.dtsi index db411def30..078f8ff228 100644 --- a/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit.dtsi +++ b/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit.dtsi @@ -28,12 +28,13 @@ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; open-source; }; -}; - -&gpio1 { - status = "okay"; - indirect-access-bus-id = <31>; + gpio1: rtl8231-gpio { + compatible = "realtek,rtl8231-gpio"; + #gpio-cells = <2>; + gpio-controller; + indirect-access-bus-id = <31>; + }; }; ðernet0 { diff --git a/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900.dtsi b/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900.dtsi index 7095006454..5993c1b798 100644 --- a/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900.dtsi +++ b/target/linux/realtek/dts-5.10/rtl8380_zyxel_gs1900.dtsi @@ -39,15 +39,18 @@ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; }; }; -}; -&gpio1 { - status = "okay"; + gpio1: rtl8231-gpio { + compatible = "realtek,rtl8231-gpio"; + #gpio-cells = <2>; + gpio-controller; + indirect-access-bus-id = <0>; - poe_enable { - gpio-hog; - gpios = <13 0>; - output-high; + poe_enable { + gpio-hog; + gpios = <13 GPIO_ACTIVE_HIGH>; + output-high; + }; }; }; diff --git a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-10p.dts b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-10p.dts index a0f377c4f4..3321887c9a 100644 --- a/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-10p.dts +++ b/target/linux/realtek/dts-5.10/rtl8382_d-link_dgs-1210-10p.dts @@ -44,6 +44,13 @@ linux,code = ; };*/ }; + + gpio1: rtl8231-gpio { + compatible = "realtek,rtl8231-gpio"; + #gpio-cells = <2>; + gpio-controller; + indirect-access-bus-id = <0>; + }; }; diff --git a/target/linux/realtek/dts-5.10/rtl838x.dtsi b/target/linux/realtek/dts-5.10/rtl838x.dtsi index bfe75b8eb2..11cabc3f63 100644 --- a/target/linux/realtek/dts-5.10/rtl838x.dtsi +++ b/target/linux/realtek/dts-5.10/rtl838x.dtsi @@ -169,15 +169,6 @@ }; }; - gpio1: rtl8231-gpio { - compatible = "realtek,rtl8231-gpio"; - #gpio-cells = <2>; - indirect-access-bus-id = <0>; - gpio-controller; - - status = "disabled"; - }; - pinmux: pinmux@1b001000 { compatible = "pinctrl-single"; reg = <0x1b001000 0x4>; -- 2.30.2