From 48625a04453b4f5775db2d2a5abebf977b81344c Mon Sep 17 00:00:00 2001 From: Sander Vanheule Date: Sun, 5 Jun 2022 13:29:23 +0200 Subject: [PATCH] ath79: TP-Link EAP225-Wall v1: convert radios to nvmem-cells Replace the mtd-cal-data phandle by an nvmem-cell reference to the art partition for the 2.4GHz ath9k radio. Add the PCIe node for the ath10k radio to the devicetree, and refer to the art partition for the calibration data using nvmem-cells. Use mac-address-increment to ensure the MAC address is set correctly, and remove the device from the caldata extraction and patching script. Signed-off-by: Sander Vanheule --- .../dts/qca9561_tplink_eap225-wall-v2.dts | 27 ++++++++++++++++--- .../etc/hotplug.d/firmware/11-ath10k-caldata | 6 ----- 2 files changed, 24 insertions(+), 9 deletions(-) diff --git a/target/linux/ath79/dts/qca9561_tplink_eap225-wall-v2.dts b/target/linux/ath79/dts/qca9561_tplink_eap225-wall-v2.dts index ecb427029d..30c9441f12 100644 --- a/target/linux/ath79/dts/qca9561_tplink_eap225-wall-v2.dts +++ b/target/linux/ath79/dts/qca9561_tplink_eap225-wall-v2.dts @@ -58,6 +58,16 @@ &pcie { status = "okay"; + + wifi@0,0 { + compatible = "qcom,ath10k"; + reg = <0 0 0 0 0>; + + mac-address-increment = <1>; + + nvmem-cells = <&macaddr_info_8>, <&calibration_ath10k>; + nvmem-cell-names = "mac-address", "calibration"; + }; }; &spi { @@ -121,6 +131,18 @@ label = "art"; reg = <0xff0000 0x010000>; read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + calibration_ath9k: calibration@1000 { + reg = <0x1000 0x440>; + }; + + calibration_ath10k: calibration@5000 { + reg = <0x5000 0x2f20>; + }; }; }; }; @@ -136,9 +158,8 @@ &wmac { status = "okay"; - mtd-cal-data = <&art 0x1000>; - nvmem-cells = <&macaddr_info_8>; - nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_info_8>, <&calibration_ath9k>; + nvmem-cell-names = "mac-address", "calibration"; }; &info { diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index ee53f31638..cb4a5797ec 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -250,12 +250,6 @@ case "$FIRMWARE" in ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ;; - tplink,eap225-wall-v2) - caldata_extract "art" 0x5000 0x2f20 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1) - ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ - /lib/firmware/ath10k/QCA9888/hw2.0/board.bin - ;; xiaomi,aiot-ac2350) caldata_extract "art" 0x5000 0x2f20 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ -- 2.30.2