From 23b904074500b2fa6691a0c9ebf82cefdd1ed95c Mon Sep 17 00:00:00 2001 From: Sander Vanheule Date: Sun, 5 Jun 2022 12:01:51 +0200 Subject: [PATCH] ath79: TP-Link EAP225-Outdoor v1: convert ath10k to nvmem-cells Add the PCIe node for the ath10k radio to the devicetree, and refer to the art partition for the calibration data using nvmem-cells. Use mac-address-increment to ensure the MAC address is set correctly, and remove the device from the caldata extraction and patching script. Signed-off-by: Sander Vanheule --- .../dts/qca9563_tplink_eap225-outdoor-v1.dts | 18 ++++++++++++++++++ .../etc/hotplug.d/firmware/11-ath10k-caldata | 1 - 2 files changed, 18 insertions(+), 1 deletion(-) diff --git a/target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v1.dts b/target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v1.dts index fc6d3365a0..9e61490a5d 100644 --- a/target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v1.dts +++ b/target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v1.dts @@ -28,3 +28,21 @@ }; }; }; + +&art { + calibration_ath10k: calibration@5000 { + reg = <0x5000 0x2f20>; + }; +}; + +&pcie { + wifi@0,0 { + compatible = "qcom,ath10k"; + reg = <0 0 0 0 0>; + + mac-address-increment = <1>; + + nvmem-cells = <&macaddr_info_8>, <&calibration_ath10k>; + nvmem-cell-names = "mac-address", "calibration"; + }; +}; diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 4e640f9e1b..b8dc2042ea 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -250,7 +250,6 @@ case "$FIRMWARE" in ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ;; - tplink,eap225-outdoor-v1|\ tplink,eap225-v3|\ tplink,eap225-wall-v2) caldata_extract "art" 0x5000 0x2f20 -- 2.30.2