openwrt/staging/jow.git
4 years agooxnas: backport patch fixing hang after reboot
Daniel Golle [Thu, 19 Mar 2020 22:37:17 +0000 (22:37 +0000)]
oxnas: backport patch fixing hang after reboot

Sungbo Eo <mans0n@gorani.run> posted a patch fixing the long-standing
reboot problem on the OXNAS OX820 platform:
  irqchip/versatile-fpga: Handle chained IRQs properly

It got queued for 5.7. Import it to oxnas target patches for now.

Fixes: b4917fa907 ("oxnas: fix oxnas-rps-timer dt-match")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 67b04e767a0dcd01d39fe71eed9bdff7d5be72f0)

4 years agolayerscape: add kmod-i2c-mux to DEVICE_PACKAGES for traverse-ls1043
Sungbo Eo [Wed, 11 Mar 2020 02:27:59 +0000 (11:27 +0900)]
layerscape: add kmod-i2c-mux to DEVICE_PACKAGES for traverse-ls1043

kmod-i2c-mux-pca954x will not get into images unless kmod-i2c-mux is added to
DEVICE_PACKAGES as well.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
(cherry picked from commit dffbe668ab321c76c041aa15ca8b753deab2c4c5)

4 years agoath79: add support for TP-Link TL-WR740N v5
Jun Su [Tue, 3 Mar 2020 09:33:40 +0000 (17:33 +0800)]
ath79: add support for TP-Link TL-WR740N v5

This adds support for the TP-Link TL-WR740N v5, a clone of the
v4 only with a different TPLINK_HWID. It was already supported
in ar71xx as well.

Specifications:

SOC: Atheros AR9331
CPU: 400MHz
Flash: 4 MiB
RAM: 32 MiB
WLAN: Atheros AR9330 bgn
Ethernet: 5 ports (100M)

Flashing instructions:

- Flash factory image from OEM WebUI:
  openwrt-ath79-tiny-tplink_tl-wr740n-v5-squashfs-factory.bin
- Sysupgrade from ar71xx image:
  openwrt-ath79-tiny-tplink_tl-wr740n-v5-squashfs-sysupgrade.bin

Signed-off-by: Jun Su <howard0su@gmail.com>
[commit title/message facelift, backport for 19.07]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit b9f4f1f97aeeec65a872c4c5b1a0528a69d16d7b)

4 years agoar71xx: fix port order on TP-Link Archer C60 v1/v2
Adrian Schmutzler [Wed, 11 Mar 2020 15:05:40 +0000 (16:05 +0100)]
ar71xx: fix port order on TP-Link Archer C60 v1/v2

The labels on the LAN ports of the TP-Link Archer C60 v1/v2 are
actually inverted compared to the ports of the internal switch.

Add this information to 02_network.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 14a07fa1f000f962d55bf53cfe9b128448b1f11f)

4 years agoath79: fix port order on TP-Link Archer C60 v1/v2
Adrian Schmutzler [Wed, 11 Mar 2020 15:00:56 +0000 (16:00 +0100)]
ath79: fix port order on TP-Link Archer C60 v1/v2

The labels on the LAN ports of the TP-Link Archer C60 v1/v2 are
actually inverted compared to the ports of the internal switch.

Add this information to 02_network.

This is the same for to-be-supported v3 of this device.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit b054729899560aa9faea594dd7df573883f0cf3f)

4 years agoar71xx: remove wrong MAC address adjustment for Archer C60 v2
Adrian Schmutzler [Wed, 11 Mar 2020 14:52:41 +0000 (15:52 +0100)]
ar71xx: remove wrong MAC address adjustment for Archer C60 v2

The adjustment of the MAC address for Archer C60 v2 in 10_fix_wifi_mac
is broken since a "mac" partition is not set up for this device on
ar71xx. Instead, the MAC address is already patched correctly in
11-ath10k-caldata.

Remove the useless adjustment.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit cbdc91902466dd113b9680566abb2eb2f8022dd4)

4 years agoar71xx: fix swapped LAN/WAN MAC address for Archer C60 v1/v2
Adrian Schmutzler [Wed, 11 Mar 2020 14:46:00 +0000 (15:46 +0100)]
ar71xx: fix swapped LAN/WAN MAC address for Archer C60 v1/v2

The MAC addresses for lan/wan are swapped compared to the vendor
firmware. This adjusts to vendor configuration, which is:

lan   *:7b   label
wan   *:7c   label+1
2.4g  *:7b   label
5g    *:7a   label-1

Only one address is stored in <&mac 0x8>, corresponding to the label.

This has been checked on revisions v1, v2 and v3.

Since ar71xx calculates the ath10k MAC address based on the ethernet
addresses, the number there is adjusted, too.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 14eb54938b525d4c2d2847a6fad7670ed944650c)

4 years agoath79: fix swapped LAN/WAN MAC address for Archer C60 v1/v2
Adrian Schmutzler [Wed, 11 Mar 2020 14:37:34 +0000 (15:37 +0100)]
ath79: fix swapped LAN/WAN MAC address for Archer C60 v1/v2

The MAC addresses for lan/wan are swapped compared to the vendor
firmware. This adjusts to vendor configuration, which is:

lan   *:7b   label
wan   *:7c   label+1
2.4g  *:7b   label
5g    *:7a   label-1

Only one address is stored in <&mac 0x8>, corresponding to the label.

This has been checked on revisions v1, v2 and v3.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 88aead0a665dd349af4fb8afcfe1a16cf90515ae)

4 years agorssileds: add dependencies based on LDFLAGS
Adrian Schmutzler [Thu, 20 Feb 2020 17:38:04 +0000 (18:38 +0100)]
rssileds: add dependencies based on LDFLAGS

This adds the direct dependencies introduced by TARGET_LDFLAGS
to the package's DEPENDS variable.

This was found by accidentally building rssileds on octeon, which
resulted in:

"Package rssileds is missing dependencies for the following libraries:
libnl-tiny.so"

Though the dependencies are provided when building for the
relevant targets ar71xx, ath79 and ramips, it seems more tidy to
specify them explicitly.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit a5b2c6f5edef1958d8789ff9bd89b408893b4358)

4 years agomt76: update to the latest version
Felix Fietkau [Thu, 20 Feb 2020 14:54:57 +0000 (15:54 +0100)]
mt76: update to the latest version

8682e0d0b49c mt76: speed up usb bulk copy
884c25e7caca mt76: usb: use max packet length for m76u_copy
1ad98b95cf4a mt76: mt76u: rely only on data buffer for usb control messagges
3d491603caff mt76: fix array overflow on receiving too many fragments for a packet
9792a62e7f30 mt76: set dma-done flag for flushed descriptors
53233cdf9486 mt76: fix handling full tx queues in mt76_dma_tx_queue_skb_raw
a4ae9219e6c7 mt76: dma: do not write cpu_idx on rx queue reset until after refill
1198fa57d185 mt76: mt7603: increase dma mcu rx ring size
91cd5be6ee37 mt76: avoid extra RCU synchronization on station removal
7d7fb26bb78a mt76: mt76x2: avoid starting the MAC too early
aac609809de1 mt76: fix LED link time failure
18627db2e633 mt76: mt76x0u: add support to TP-Link T2UHP
5ecfdb1a6e0a mt76: mt76x02: fix handling MCU timeouts during hw restart
f7e9be89db59 mt76: mt7603: add upper limit for dynamic sensitivity minimum receive power
23b834485070 mt76: mt7603: enable dynamic sensitivity adjustment by default
08054d5ab135 mt76: mt76x02: reset MCU timeout counter earlier in watchdog reset

Signed-off-by: Felix Fietkau <nbd@nbd.name>
4 years agoar71xx/ath79: ew-dorin, fix the trigger level for WPS button
Catrinel Catrinescu [Wed, 11 Mar 2020 09:10:00 +0000 (10:10 +0100)]
ar71xx/ath79: ew-dorin, fix the trigger level for WPS button

Because the WPS button had the wrong trigger level,
the failsafe mode was triggered quite often,
after this commit:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=27f3f493de

Signed-off-by: Catrinel Catrinescu <cc@80211.de>
(cherry picked from commit 3e03b7ac4ada4966d058871d0a1f67f1f0f408d4)

4 years agokernel: backport out-of-memory fix for non-Ethernet devices
Rafał Miłecki [Wed, 11 Mar 2020 07:39:29 +0000 (08:39 +0100)]
kernel: backport out-of-memory fix for non-Ethernet devices

Doing up & down on non-Ethernet devices (e.g. monitor mode interface)
was consuming memory.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit ec8e8e2ef0826d82b4dfbd567a073b31dc27b764)

4 years agokernel: bump 4.14 to 4.14.172
Koen Vandeputte [Mon, 9 Mar 2020 10:49:17 +0000 (11:49 +0100)]
kernel: bump 4.14 to 4.14.172

Refreshed all patches.

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
4 years agorpcd: add respawn param
Florian Eckert [Thu, 7 Nov 2019 13:31:29 +0000 (14:31 +0100)]
rpcd: add respawn param

The rpcd service is an important service, but if the service stops
working for any reason, no one will ever respawn that service. With this
commit, the procd service will monitor if the rpcd service
is running. If the rpcd service has crashed, then
procd respawns the rpcd service.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry picked from commit 432ec292ccc8b634facacbd018d08947d204225a)

4 years agorpcd: update to latest Git HEAD
Jo-Philipp Wich [Tue, 17 Dec 2019 07:33:33 +0000 (08:33 +0100)]
rpcd: update to latest Git HEAD

aaa0836 file: extend exec acl checks to commands with arguments

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 762aac50c09cca494bbc8cfbe8aff967f39ce8cd)

4 years agoar71xx: add missing LED migration for Archer C7
David Bauer [Sun, 1 Mar 2020 20:31:29 +0000 (21:31 +0100)]
ar71xx: add missing LED migration for Archer C7

When changing the LED names for the Archer C7 to represent the correct
color, a migration for existing UCI entries was not created.

Add a migration to keep existing LED configurations working.

Fixes commit c79c001b593b ("ar71xx: Archer C7 v1 LED names and RFKILL
fixes")

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 4349d4c6823bfe09caabbdd3c9a65198addc76d6)

4 years agoar71xx: correct AVM FRITZ Repeater 450E WPS button flag
David Bauer [Sun, 1 Mar 2020 17:36:17 +0000 (18:36 +0100)]
ar71xx: correct AVM FRITZ Repeater 450E WPS button flag

The AVM FRITZ!WLAN Repeater 450E's WPS button is not active low.

Correct the active low flag to avoid unintenional activation of
failsafe mode on boot.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 1d4f2ca6105698fde3b997c32e7e41f080c79a15)

4 years agoOpenWrt v19.07.2: revert to branch defaults
Jo-Philipp Wich [Thu, 27 Feb 2020 21:34:09 +0000 (22:34 +0100)]
OpenWrt v19.07.2: revert to branch defaults

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
4 years agoOpenWrt v19.07.2: adjust config defaults
Jo-Philipp Wich [Thu, 27 Feb 2020 21:34:09 +0000 (22:34 +0100)]
OpenWrt v19.07.2: adjust config defaults

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
4 years agolibubox: update to latest Git HEAD
Jo-Philipp Wich [Thu, 27 Feb 2020 21:03:18 +0000 (22:03 +0100)]
libubox: update to latest Git HEAD

7da6643 tests: blobmsg: add test case
75e300a blobmsg: fix wrong payload len passed from blobmsg_check_array

Fixes: FS#2833
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 955634b473284847e3c8281a6ac85655329d8b06)

4 years agoath79: add missing reset-gpios for NanoStation Loco M (XW)
Roger Pueyo Centelles [Mon, 24 Feb 2020 17:21:49 +0000 (18:21 +0100)]
ath79: add missing reset-gpios for NanoStation Loco M (XW)

When porting support from ar71xx to ath79, the reset-gpios option was
missed. Due to a hardware bug, this would eventually leave the devices
with RX-deaf Ethernet PHY.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
(cherry picked from commit 6613a7f5cc8e1527671128d9479b3de78f7b4cdd)

4 years agoath79: add support for Ubiquiti NanoStation Loco M (XW)
Roger Pueyo Centelles [Wed, 18 Sep 2019 13:17:56 +0000 (15:17 +0200)]
ath79: add support for Ubiquiti NanoStation Loco M (XW)

This commit adds support for the NanoStation Loco M2/M5 XW devices
on the ath79 target (support was long ago available on ar71xx).

Specifications:

 - AR9342 SoC @ 535 MHz
 - 64 MB RAM
 - 8 MB SPI flash
 - 1x 10/100 Mbps Ethernet, 24 Vdc PoE-in
 - AR8032 switch
 - 2T2R 5 GHz radio, 22 dBm
 - 13 dBi built-in antenna
 - POWER/LAN green LEDs
 - 4x RSSI LEDs (red, orange, green, green)
 - UART (115200 8N1) on PCB

Flashing via TFTP:

 - Use a pointy tool (e.g., pen cap, paper clip) and keep the reset
   button on the device or on the PoE supply pressed
 - Power on the device via PoE (keep reset button pressed)
 - Keep pressing until LEDs flash alternatively LED1+LED3 =>
   LED2+LED4 => LED1+LED3, etc.
 - Release reset button
 - The device starts a TFTP server at 192.168.1.20
 - Set a static IP on the computer (e.g., 192.168.1.21/24)
 - Upload via tftp the factory image:
   $ tftp 192.168.1.20
   tftp> bin
   tftp> trace
   tftp> put openwrt-ath79-generic-xxxxx-ubnt_nanostation-loco-m-xw-squashfs-factory.bin

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
(backported from commit 633c4304ad42d18d180ba65a264ba668de445d91)
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoppp: backport security fixes
Petr Štetiar [Thu, 20 Feb 2020 08:03:54 +0000 (09:03 +0100)]
ppp: backport security fixes

8d45443bb5c9 pppd: Ignore received EAP messages when not doing EAP
8d7970b8f3db pppd: Fix bounds check in EAP code
858976b1fc31 radius: Prevent buffer overflow in rc_mksid()

Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 215598fd03899c19a9cd26266221269dd5ec8cee)
Fixes: CVE-2020-8597
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
4 years agoRevert "ppp: backport security fixes"
Jo-Philipp Wich [Wed, 26 Feb 2020 15:40:21 +0000 (16:40 +0100)]
Revert "ppp: backport security fixes"

This reverts commit 6b7eeb74dbf8b491b6426820bfa230fca60047dc since it
didn't contain a reference to the CVE it addresses. The next commit
will re-add the commit including a CVE reference in its commit message.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
4 years agouhttpd: update to latest Git HEAD
Jo-Philipp Wich [Wed, 12 Feb 2020 17:00:42 +0000 (18:00 +0100)]
uhttpd: update to latest Git HEAD

2ee323c file: poke ustream after starting deferred program

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 04069fde19e86af7728111814afadf780bf08018)

4 years agokernel: bump 4.14 to 4.14.171
Koen Vandeputte [Fri, 21 Feb 2020 14:05:48 +0000 (15:05 +0100)]
kernel: bump 4.14 to 4.14.171

Refreshed all patches.

Fixes:
- CVE-2013-1798

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
4 years agoipq806x: fix bug in L2 cache scaling
Ansuel Smith [Sun, 15 Dec 2019 01:25:04 +0000 (02:25 +0100)]
ipq806x: fix bug in L2 cache scaling

It has been notice a buf in L2 cache scaling where the scaling is not
done proprely if the frequency is set to the initial state before
the new frequency.

From: https://patchwork.kernel.org/patch/10565443/

* The clocks are set to aux clock rate first to make sure the
* secondary mux is not sourcing off of QSB. The rate is then set to
* two different rates to force a HFPLL reinit under all
* circumstances.

In the initial stage of boot to force a new frequency to apply, is
needed to first set the frequency back to the lowest one (aux_rate)
and then to the target one. This force and make sure the controller
actually switch the frequency to the right one. Apply the same
mechanism to L2 frequency scaling. Before scaling to the target
frequency, first set the frequency to the aux_rate to force the
transition, then scale it to the target frequency. Doing the wrong way
can produce unexpected results and could lock the scaling mechanism
until a full reboot is done (Causing a full reset by the krait-cc driver)

From: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=77612720a2362230af726baa4149c40ec7a7fb05

When the Hfplls are reprogrammed during the rate change,
the primary muxes which are sourced from the same hfpll
for higher frequencies, needs to be switched to the 'safe
secondary mux' as the parent for that small window. This
is done by registering a clk notifier for the muxes and
switching to the safe parent in the PRE_RATE_CHANGE notifier
and back to the original parent in the POST_RATE_CHANGE notifier.

This should apply also to L2 scaling... as we can't relly use
the notifier, we manually do this on L2 scaling.

Tested-By: Marc Benoit <marcb62185@gmail.com> [19.07: R7800]
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065]
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
(cherry picked from commit 5ab9c0b388e9cf2537ef23d6e9baaf5730a14a1c)

4 years agoipq806x: add missing core1 voltage tolerance
Pavel Kubelun [Mon, 2 Dec 2019 23:45:47 +0000 (00:45 +0100)]
ipq806x: add missing core1 voltage tolerance

Voltage tolerance is accounted per core, not per cpu, so add
missing DT entry.

Tested-By: Marc Benoit <marcb62185@gmail.com> [19.07: R7800]
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
(cherry picked from commit 77e7d6c20dc6d5e50600fb4d013f4b71341e4168)

4 years agoath79: ar934x: use reset for usb-phy-analog
Johann Neuhauser [Thu, 19 Dec 2019 12:11:26 +0000 (13:11 +0100)]
ath79: ar934x: use reset for usb-phy-analog

This was already available on ar71xx, but is missing on ath79.
This solves the slow usb speed on TP-Link WDR3600/WDR4300 and similar,
as reported in Flyspray [0], OpenWRT Forum [1] and GitHub PR [2].

[0] https://bugs.openwrt.org/index.php?do=details&task_id=2567
[1] https://forum.openwrt.org/t/usb-wdr4300-low-speed-on-external-storage/46794
[2] https://github.com/openwrt/openwrt/pull/964

Tested-By: Lech Perczak <lech.perczak@gmail.com> [TL-WDR4300]
Signed-off-by: Johann Neuhauser <johann@it-neuhauser.de>
(cherry picked from commit bda6b6144dbe3e12d128b500821799ef472de4cb)

4 years agoath79: phy-ar7200-usb: adapt old behavior of arch/mips/ath79/dev-usb.c
Johann Neuhauser [Thu, 19 Dec 2019 12:07:17 +0000 (13:07 +0100)]
ath79: phy-ar7200-usb: adapt old behavior of arch/mips/ath79/dev-usb.c

[ Upstream commit 6cca6fffa06b1996f9bcc280f766e8ba4fa97d45 ]

Do not put usb-phy into reset if clearing the usb-phy reset or
setting the suspend_override has failed.

Reorder (de)asserts like in arch/mips/ath79/dev-usb.c.

Add an optional reset_control "usb-phy-analog", which is needed for
ar934x SoCs like in the old mach-driver arch/mips/ath79/dev-usb.c.

Tested-By: Lech Perczak <lech.perczak@gmail.com> [TL-WDR4300]
Signed-off-by: Johann Neuhauser <johann@it-neuhauser.de>
[added reference to upstream commit, Tested-by]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
4 years agoRevert "ath79: add support for Ubiquiti NanoStation Loco M (XW)"
Adrian Schmutzler [Sat, 22 Feb 2020 20:25:07 +0000 (21:25 +0100)]
Revert "ath79: add support for Ubiquiti NanoStation Loco M (XW)"

This reverts commit 21bf718b8c3b0fe1f13807aa5db16a2fb4f48120.

Until the mdio-reset is solved, this is not ready for stable release.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoath79: add support for Ubiquiti NanoStation Loco M (XW)
Roger Pueyo Centelles [Wed, 18 Sep 2019 13:17:56 +0000 (15:17 +0200)]
ath79: add support for Ubiquiti NanoStation Loco M (XW)

This commit adds support for the NanoStation Loco M2/M5 XW devices
on the ath79 target (support was long ago available on ar71xx).

Specifications:

 - AR9342 SoC @ 535 MHz
 - 64 MB RAM
 - 8 MB SPI flash
 - 1x 10/100 Mbps Ethernet, 24 Vdc PoE-in
 - AR8032 switch
 - 2T2R 5 GHz radio, 22 dBm
 - 13 dBi built-in antenna
 - POWER/LAN green LEDs
 - 4x RSSI LEDs (red, orange, green, green)
 - UART (115200 8N1) on PCB

Flashing via TFTP:

 - Use a pointy tool (e.g., pen cap, paper clip) and keep the reset
   button on the device or on the PoE supply pressed
 - Power on the device via PoE (keep reset button pressed)
 - Keep pressing until LEDs flash alternatively LED1+LED3 =>
   LED2+LED4 => LED1+LED3, etc.
 - Release reset button
 - The device starts a TFTP server at 192.168.1.20
 - Set a static IP on the computer (e.g., 192.168.1.21/24)
 - Upload via tftp the factory image:
   $ tftp 192.168.1.20
   tftp> bin
   tftp> trace
   tftp> put openwrt-ath79-generic-xxxxx-ubnt_nanostation-loco-m-xw-squashfs-factory.bin

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
(backported from commit 633c4304ad42d18d180ba65a264ba668de445d91)
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoramips: append tail to WF2881 initramfs image
Sungbo Eo [Fri, 7 Feb 2020 11:26:05 +0000 (20:26 +0900)]
ramips: append tail to WF2881 initramfs image

Stock firmware has a vendor-defined tail at the end of uImage for image
validation. This patch enables OpenWrt installation from stock firmware
without having to access the UART console.

Installation via web interface:
1.  Flash **initramfs** image through the stock web interface.
2.  Boot into OpenWrt and perform sysupgrade with sysupgrade image.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
(cherry picked from commit be3e98ce26da5e737744427e1d59dd1c0508edef)

4 years agoath79: add support for Ubiquiti Picostation M (XM)
Adrian Schmutzler [Mon, 17 Feb 2020 23:08:18 +0000 (00:08 +0100)]
ath79: add support for Ubiquiti Picostation M (XM)

This adds support for the Ubiquiti Picostation M (XM), which has the
same board/LEDs as the Bullet M XM, but different case and antennas.

Specifications:
- AR7241 SoC @ 400 MHz
- 32 MB RAM
- 8 MB SPI flash
- 1x 10/100 Mbps Ethernet, 24 Vdc PoE-in
- External antenna: 5 dBi (USA), 2 dBi (EU)
- POWER/LAN green LEDs
- 4x RSSI LEDs (red, orange, green, green)
- UART (115200 8N1) on PCB

Flashing via WebUI:
  Upload the factory image via the stock firmware web UI.

  Attention: airOS firmware versions >= 5.6 have a new bootloader with
  an incompatible partition table!

  Please downgrade to <= 5.5 _before_ flashing OpenWrt!
  Refer to the device's Wiki page for further information.

Flashing via TFTP:
  Same procedure as other NanoStation M boards.

- Use a pointy tool (e.g., pen cap, paper clip) and keep the reset
  button on the device or on the PoE supply pressed
- Power on the device via PoE (keep reset button pressed)
- Keep pressing until LEDs flash alternatively LED1+LED3 =>
  LED2+LED4 => LED1+LED3, etc.
- Release reset button
- The device starts a TFTP server at 192.168.1.20
- Set a static IP on the computer (e.g., 192.168.1.21/24)
- Upload via tftp the factory image:
  $ tftp 192.168.1.20
  tftp> bin
  tftp> trace
  tftp> put openwrt-ath79-generic-xxxxx-ubnt_picostation-m-squashfs-factory.bin

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 6fdaf16dd0623db1a324d33fdf0bc1654365ee62)

4 years agoath79: add support for Ubiquiti Nanostation Loco M (XM)
Sven Roederer [Mon, 17 Feb 2020 11:22:53 +0000 (12:22 +0100)]
ath79: add support for Ubiquiti Nanostation Loco M (XM)

This adds support for the Ubiquiti Nanostation Loco M (XM), which
has the same board/LEDs as the Bullet M XM, but different case and
antennas.

Specifications:
- AR7241 SoC @ 400 MHz
- 32 MB RAM
- 8 MB SPI flash
- 1x 10/100 Mbps Ethernet, 24 Vdc PoE-in
- NS Loco M2: built-in antenna: 8 dBi; AR9287
- NS Loco M5: built-in antenna: 13 dBi; 2T2R 5 GHz radio
- POWER/LAN green LEDs
- 4x RSSI LEDs (red, orange, green, green)
- UART (115200 8N1) on PCB

Flashing via WebUI:
  Upload the factory image via the stock firmware web UI.
  Note that only certain firmware versions accept unsigned
  images. Refer to the device's Wiki page for further information.

Flashing via TFTP:
  Same procedure as other NanoStation M boards.

- Use a pointy tool (e.g., pen cap, paper clip) and keep the reset
  button on the device or on the PoE supply pressed
- Power on the device via PoE (keep reset button pressed)
- Keep pressing until LEDs flash alternatively LED1+LED3 =>
  LED2+LED4 => LED1+LED3, etc.
- Release reset button
- The device starts a TFTP server at 192.168.1.20
- Set a static IP on the computer (e.g., 192.168.1.21/24)
- Upload via tftp the factory image:
  $ tftp 192.168.1.20
  tftp> bin
  tftp> trace
  tftp> put openwrt-ath79-generic-xxxxx-ubnt_nanostation-loco-m-squashfs-factory.bin

Tested on NanoStation Loco M2.

Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>
Co-developed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit b56bcfe3be40493daecf13a4080920de2994ff54)

4 years agoath79: add gpio4 pinmux on TL-WR841N/ND v8, WR842N v2, MR3420 v2
Adrian Schmutzler [Thu, 30 Jan 2020 13:59:25 +0000 (14:59 +0100)]
ath79: add gpio4 pinmux on TL-WR841N/ND v8, WR842N v2, MR3420 v2

This adds a pinmux to the shared DTSI for TP-Link TL-WR841N/ND v8,
TL-WR842N v2 and TL-MR3420 v2. It is supposed to be the equivalent
of:

/* config gpio4 as normal gpio function */
ath79_gpio_output_select(TL_MR3420V2_GPIO_USB_POWER,AR934X_GPIO_OUT_GPIO);

This allows to enable USB power on these devices.

While at it, move the jtag_disable_pins to &gpio node and remove the
redundant status=okay there.

Tested on TP-Link TL-WR842N v2.

Fixes: FS#2753
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Armin Fuerst <armin@fuerst.priv.at>
[backport: change individual DTS files, no mr3420-v2 present]
(backported from commit 18c95c9d6ebea5cef1254ee917bff8aba993666d)

4 years agoath79: enable forceless sysupgrade from ar71xx on fritz300e
Adrian Schmutzler [Thu, 13 Feb 2020 13:46:52 +0000 (14:46 +0100)]
ath79: enable forceless sysupgrade from ar71xx on fritz300e

This adds the ar71xx board name to the SUPPORTED_DEVICES on ath79,
so forceless sysupgrade on this device becomes possible.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 49ff00db340ea017c266ba37546c71209cfe3e26)

4 years agoppp: backport security fixes
Petr Štetiar [Thu, 20 Feb 2020 08:03:54 +0000 (09:03 +0100)]
ppp: backport security fixes

8d45443bb5c9 pppd: Ignore received EAP messages when not doing EAP
8d7970b8f3db pppd: Fix bounds check in EAP code
858976b1fc31 radius: Prevent buffer overflow in rc_mksid()

Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 215598fd03899c19a9cd26266221269dd5ec8cee)

4 years agoath79: add wmac migration for all ar93xx/qca95xx SoCs
Chuanhong Guo [Fri, 21 Jun 2019 10:33:53 +0000 (18:33 +0800)]
ath79: add wmac migration for all ar93xx/qca95xx SoCs

Add migration for all ar71xx device path as well as previously
incorrect ath79 path.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
(cherry picked from commit d08b5bb344792bb82ccbcf3a0a8d25c79e72f4fe)
Tested-by: Lech Perczak <lech.perczak@gmail.com> [TP-Link TL-WDR4300 v1]
4 years agoath79: ar93xx/qca95xx: move gmac/wmac/pcie node out of apb bus
Chuanhong Guo [Fri, 21 Jun 2019 10:25:12 +0000 (18:25 +0800)]
ath79: ar93xx/qca95xx: move gmac/wmac/pcie node out of apb bus

according to functional block diagram in datasheet, these devices
don't belong to apb bus.
Move these nodes out to match datasheet description.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
(cherry picked from commit f65501e1c2fee17d61f047cee404ddf5f0caf31a)
Tested-by: Lech Perczak <lech.perczak@gmail.com> [TP-Link TL-WDR4300 v1]
4 years agohostapd: remove erroneous $(space) redefinition
Jo-Philipp Wich [Sat, 8 Feb 2020 10:34:41 +0000 (11:34 +0100)]
hostapd: remove erroneous $(space) redefinition

The $(space) definition in the hostapd Makefile ceased to work with
GNU Make 4.3 and later, leading to syntax errors in the generated
Kconfig files.

Drop the superfluous redefinition and reuse the working $(space)
declaration from rules.mk to fix this issue.

Fixes: GH#2713
Ref: https://github.com/openwrt/openwrt/pull/2713#issuecomment-583722469
Reported-by: Karel Kočí <cynerd@email.cz>
Suggested-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Shaleen Jain <shaleen@jain.sh>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 766e778226f5d4c6ec49ce22b101a5dbd4306644)

4 years agoath79: fix DTS node names for Ubiquiti XW partitions
Adrian Schmutzler [Mon, 18 Nov 2019 23:14:38 +0000 (00:14 +0100)]
ath79: fix DTS node names for Ubiquiti XW partitions

Some node names were inconsistent with the reg property. Fix it.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 1a0d6e1eba57d38c5ab6b0e8468188f09e45079d)
[fixed XM->XW in commit title for backport]

4 years agouboot-envtools: ath79: add Netgear WNDR3700v2
Michal Cieslakiewicz [Mon, 20 Jan 2020 20:20:09 +0000 (21:20 +0100)]
uboot-envtools: ath79: add Netgear WNDR3700v2

Add Netgear WNDR3700v2 to the list of supported boards.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
[rebase, adjusted commit title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit a09408fa576c6482c21f683662cb2d5a49e14ecf)

4 years agoath79: WNDR3700 v1/v2: make u-boot env partition writable
Michal Cieslakiewicz [Mon, 3 Feb 2020 18:54:31 +0000 (19:54 +0100)]
ath79: WNDR3700 v1/v2: make u-boot env partition writable

Remove read-only flag from U-boot environment partition for Netgear
WNDR3700 v1 and v2 so u-boot-envtools can modify data there.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
(cherry picked from commit 6227c8d1bf41739586969c3102897a7ba179114d)

4 years agobcm53xx: build images for Luxul ABR-4500 and XBR-4500 routers
Dan Haab [Wed, 5 Feb 2020 17:37:44 +0000 (10:37 -0700)]
bcm53xx: build images for Luxul ABR-4500 and XBR-4500 routers

Luxul ABR-4500 and XBR-4500 devices are wired routers with 5 Ethernet
ports and 1 USB 3.0 port. Flashing requires using Luxul firmware 6.4.0
or newer and uploading firmware using "Firmware Update" web UI page.

Signed-off-by: Dan Haab <dan.haab@legrand.com>
(cherry picked from commit 1d47f81581bcd476487e5b29314602167a843b99)
[rmilecki: use DEVICE_TITLE for 19.07]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
4 years agofirmware-utils: add lxlfw tool for generating Luxul firmwares
Dan Haab [Wed, 5 Feb 2020 17:37:43 +0000 (10:37 -0700)]
firmware-utils: add lxlfw tool for generating Luxul firmwares

It's a simple tool prepending image with a Luxul header.

Signed-off-by: Dan Haab <dan.haab@legrand.com>
(cherry picked from commit 9aa6569aa669767ec9febf1de01a3983a1cb9482)

4 years agomac80211: brcm: backport remaining 5.6 kernel patches
Rafał Miłecki [Thu, 6 Feb 2020 10:36:15 +0000 (11:36 +0100)]
mac80211: brcm: backport remaining 5.6 kernel patches

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit aca274091ad3b50b770c0dd44f3ceefe8095d528)

4 years agokernel: add missing symbol
Koen Vandeputte [Wed, 5 Feb 2020 17:23:59 +0000 (18:23 +0100)]
kernel: add missing symbol

Reported by Buildbot:

x86 instruction decoder selftest (X86_DECODER_SELFTEST) [N/y/?] (NEW) aborted!

Fixes: eca8a2ee0d44 ("kernel: bump 4.14 to 4.14.169")
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
4 years agokernel: add support for GD25D05 SPI NOR
Koen Vandeputte [Mon, 6 Jan 2020 13:12:02 +0000 (14:12 +0100)]
kernel: add support for GD25D05 SPI NOR

This chip is used on newer RB912UAG-5HPnD r2 boards:

Before:

[    0.642553] m25p80 spi0.0: unrecognized JEDEC id bytes: c8, 40, 10
[    0.649381] NAND flash driver for the RouterBOARD 91x series

After:

[    0.641714] m25p80 spi0.0: found gd25d05, expected m25p80
[    0.649916] m25p80 spi0.0: gd25d05 (64 Kbytes)
[    0.655122] Creating 4 MTD partitions on "spi0.0":
[    0.660164] 0x000000000000-0x00000000c000 : "routerboot"
[    0.667782] 0x00000000c000-0x00000000d000 : "hard_config"
[    0.675073] 0x00000000d000-0x00000000e000 : "bios"
[    0.682613] 0x00000000e000-0x00000000f000 : "soft_config"
[    0.690304] NAND flash driver for the RouterBOARD 91x series

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
4 years agokernel: bump 4.14 to 4.14.169
Koen Vandeputte [Tue, 4 Feb 2020 11:05:46 +0000 (12:05 +0100)]
kernel: bump 4.14 to 4.14.169

Refreshed all patches.

Fixes:
- CVE-2019-14896
- CVE-2019-14897

Remove upstreamed:
- 023-0007-crypto-crypto4xx-Fix-wrong-ppc4xx_trng_probe-ppc4xx_.patch
- 001-4.22-01-MIPS-BCM63XX-drop-unused-and-broken-DSP-platform-dev.patch

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
4 years agoramips: reenable image creation for the D-Link DIR-645
Mason Clarke [Sun, 29 Dec 2019 19:39:24 +0000 (20:39 +0100)]
ramips: reenable image creation for the D-Link DIR-645

This commit reenables the image creation for the D-Link DIR-645.

Images built for the D-Link DIR-645 work just fine, there is no reason
to disable the image creation for it.

I tested the OpenWrt 18.06.5 and 19.07.0-rc1 images, as well as an
image I built from the current 19.07 branch (git HEAD 62d5ece) with
the default 19.07 release config, and I cannot confirm the report that
commit 2607c02ed599b6118ba26e2f35e7c828c21d7275
("ramips: disable D-Link DIR-645 by default") references.
Configuration changes were applied successfully and remained set after
a reboot as well. The log also showed no anomalies.

This reverts commit 2607c02ed599b6118ba26e2f35e7c828c21d7275.

Signed-off-by: Mason Clarke <mclarke2355@gmail.com>
4 years agoramips: use tpt DTS trigger for TP-Link TL-MR3020 v3 and TL-WA801ND v5
Jan Alexander [Thu, 30 Jan 2020 14:23:51 +0000 (15:23 +0100)]
ramips: use tpt DTS trigger for TP-Link TL-MR3020 v3 and TL-WA801ND v5

This converts the TP-Link TL-MR3020v3 board to use the WLAN throughput
LED trigger in order to react to all VAPs.

It also moves the WLAN trigger config of the TP-Link TL-WA801NDv5 to the
DTS and merges the now identical LAN LED configs.

Verified these changes on a TL-MR3020v3 and TL-WA801NDv5.

Signed-off-by: Jan Alexander <jan@nalx.net>
[changed commit title and extended commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[added comment about test result on TL-WA801ND v5]
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 20eb45da4fc19c12ea2073471992eeaf9d602fa5)

4 years agoramips: remove duplicate DEVICE_PACKAGES for TP-Link Archer C20i
Adrian Schmutzler [Wed, 29 Jan 2020 19:27:25 +0000 (20:27 +0100)]
ramips: remove duplicate DEVICE_PACKAGES for TP-Link Archer C20i

DEVICE_PACKAGES is specified twice for the same device. Remove the
first (=older) assignment.

Fixes: 40692f0fb55c ("ramips: mt7620: select only the matching mt76 driver")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 4ecd6510bf8877dcd07561045852726ffbab8814)

4 years agoOpenWrt v19.07.1: revert to branch defaults
Jo-Philipp Wich [Wed, 29 Jan 2020 16:08:14 +0000 (17:08 +0100)]
OpenWrt v19.07.1: revert to branch defaults

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
4 years agoOpenWrt v19.07.1: adjust config defaults
Jo-Philipp Wich [Wed, 29 Jan 2020 16:08:11 +0000 (17:08 +0100)]
OpenWrt v19.07.1: adjust config defaults

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
4 years agoopkg: update to latest Git HEAD
Jo-Philipp Wich [Sat, 25 Jan 2020 13:27:10 +0000 (14:27 +0100)]
opkg: update to latest Git HEAD

80d161e opkg: Fix -Wformat-overflow warning
c09fe20 libopkg: fix skipping of leading whitespace when parsing checksums

Fixes: CVE-2020-7982
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit c69c20c6670081d1eaab000734d89de57eb64148)

4 years agokernel: fix dst reference leak in flow offload
Felix Fietkau [Thu, 23 Jan 2020 16:40:06 +0000 (17:40 +0100)]
kernel: fix dst reference leak in flow offload

Fixes a significant amount of leaked memory with lots of connections

Ref: PR#2721
Tested-by: Jerome Benoit <jerome.benoit@sap.com> [WRT1900AC v1]
Signed-off-by: Felix Fietkau <nbd@nbd.name>
[removed 4.19 patch during cherry-pick]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit c6c4701def07cd01a1b077cee93f64a9b2e3b5be)

4 years agoath79: fix SUPPORTED_DEVICES not matching ar71xx board names
Adrian Schmutzler [Thu, 23 Jan 2020 14:42:48 +0000 (15:42 +0100)]
ath79: fix SUPPORTED_DEVICES not matching ar71xx board names

Based on a script for comparison, this fixes (hopefully) all errors
in SUPPORTED_DEVICES for ar71xx->ath79 upgrade.

Devices where old string is removed as the device does not exist
in ar71xx:
- dlink_dir-859-a1
- tplink_archer-a7-v5
- tplink_cpe510-v3 [only in master]

Devices where string is changed because it did not match the board
name in ar71xx:
- tplink_tl-mr3220-v1
- tplink_tl-mr3420-v1
- tplink_tl-wr2543-v1
- tplink_tl-wr741nd-v4
- tplink_tl-wr841-v7
- ubnt_unifiac-mesh
- ubnt_unifiac-mesh-pro
- ubnt_unifiac-pro

For this device, the correct string could not be found, but we could
not determine the correct one. Thus, the string is removed for now:
- tplink_tl-wr740n-v4

The script for checking this is quite simple (note that newer
entries, i.e. ath79->ath79 upgrade, are displayed as missing):

  newpath=target/linux/ath79/image/
  oldpath=target/linux/ar71xx/base-files/lib/ar71xx.sh

  for s in $(grep -roh "SUPPORTED_DEVICES.*" $newpath | sed 's/SUPPORTED_DEVICES *.= *//'); do
    found="Missing"
    grep -q -r "\"$s\"" $oldpath && found="Found"
    echo "$s: $found."
  done

The errors might be filtered by appending 'grep "Missing"' to the script.

Fixes: FS#2751
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 07ce940b77e6aceb095b0a16dda41e190dfc5b87)

4 years agoath79: remove SUPPORTED_DEVICES for TP-Link Archer D50 v1
Adrian Schmutzler [Wed, 14 Aug 2019 22:46:07 +0000 (00:46 +0200)]
ath79: remove SUPPORTED_DEVICES for TP-Link Archer D50 v1

This device has not been supported in ar71xx, so there is no need
for an explicit SUPPORTED_DEVICES entry.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 894bdee7563036d6627022d7f292e83241a807a7)

4 years agomac80211: Update to version 4.19.98
Hauke Mehrtens [Sun, 26 Jan 2020 18:53:38 +0000 (19:53 +0100)]
mac80211: Update to version 4.19.98

The removed patches are all integrated in the upstream version now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agolantiq: ltq-ptm: vr9: fix skb handling in ptm_hard_start_xmit()
Martin Schiller [Tue, 21 Jan 2020 09:42:33 +0000 (10:42 +0100)]
lantiq: ltq-ptm: vr9: fix skb handling in ptm_hard_start_xmit()

Call skb_orphan(skb) to call the owner's destructor function and make
the skb unowned.

This is necessary to prevent sk_wmem_alloc of a socket from overflowing,
which leads to ENOBUFS errors on application level.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
(cherry picked from commit 996f02e5bafad2815e72821c19d41fb5297e4dad)

4 years agombedtls: update to 2.16.4
Magnus Kroken [Sat, 25 Jan 2020 17:33:41 +0000 (18:33 +0100)]
mbedtls: update to 2.16.4

Fixes side channel vulnerabilities in mbed TLS' implementation of ECDSA.

Release announcement:
https://tls.mbed.org/tech-updates/releases/mbedtls-2.16.4-and-2.7.13-released

Security advisory:
https://tls.mbed.org/tech-updates/security-advisories/mbedtls-security-advisory-2019-12

Fixes:
 * CVE-2019-18222: Side channel attack on ECDSA

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
(cherry picked from commit 6e96fd90471a49185bcfe9dcb4844d444674ecab)

4 years agokernel: bump 4.14 to 4.14.167
Koen Vandeputte [Fri, 24 Jan 2020 10:14:21 +0000 (11:14 +0100)]
kernel: bump 4.14 to 4.14.167

Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
4 years agoprocd: update to version 2020-01-24
Petr Štetiar [Fri, 24 Jan 2020 07:34:10 +0000 (08:34 +0100)]
procd: update to version 2020-01-24

Get only fix backports from openwr-19.07 procd branch:

 31e4b2dfdbd7 state: fix reboot causing shutdown inside LXC container
 557f11b3a20f instance: provide error feedback if ujail binary is missing
 0a11aa405d3f instance: Fix instance_config_move_strdup() function
 44dd9419812b instance: fix typo in error message
 153820c76471 instance: fix pidfile and seccomp attributes double free

Signed-off-by: Petr Štetiar <ynezz@true.cz>
4 years agoramips: mt7621: ubnt-erx: allow sysupgrade from master
Petr Štetiar [Mon, 20 Jan 2020 19:36:19 +0000 (20:36 +0100)]
ramips: mt7621: ubnt-erx: allow sysupgrade from master

Currently it's not possible to downgrade from master:

 Device ubiquiti,edgerouterx not supported by this image
 Supported devices: ubnt-erx

So fix it by adding a DTS based device name from master into
SUPPORTED_DEVICES list.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
4 years agohostapd: fix faulty WMM IE parameters with ETSI regulatory domains
Felix Fietkau [Thu, 23 Jan 2020 13:51:58 +0000 (14:51 +0100)]
hostapd: fix faulty WMM IE parameters with ETSI regulatory domains

hostapd sets minimum values for CWmin/CWmax/AIFS and maximum for TXOP.
The code for applying those values had a few bugs leading to bogus values,
which caused significant latency and packet loss.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
4 years agotools: tplink-safeloader: update soft_ver for TP-Link Archer C6 v2 (EU)
Anderson Vulczak [Wed, 27 Nov 2019 23:31:52 +0000 (21:31 -0200)]
tools: tplink-safeloader: update soft_ver for TP-Link Archer C6 v2 (EU)

This patch updates "soft_ver" for TP-Link Archer C6 v2 (EU).

It makes possible to upload OpenWrt on lastest vendor's firmware
as the web-based updater checks for major.minor version during upload.

Due to that on next major/minor version update TP-Link will stop
us from using the web-based firmware update tool, so it will
require a new patch on soft_ver to match major and minor version.
Up to today's latest stock firmware the patch (major.minor.patch)
version does not matters, that allows downgrade from 1.1.4 to 1.1.1
but do not allow downgrade from 1.1.X to 1.0.X.

Signed-off-by: Anderson Vulczak <andi@andi.com.br>
(cherry picked from commit 7a8bfbf0ffaea14e15ae2016a54adf48337c6251)
(cherry picked from commit eeb93e5c2b23518e372737ecf8fdde4b9f139a49)

4 years agouboot-envtools: ath79: add support for glinet,gl-ar150
Kimmo Vuorinen [Wed, 22 Jan 2020 21:36:26 +0000 (23:36 +0200)]
uboot-envtools: ath79: add support for glinet,gl-ar150

Add ubootenv uci config for GL.inet GL-AR150

Signed-off-by: Kimmo Vuorinen <kimmo.vuorinen@gmail.com>
[commit title/message facelift]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit a8723c48add5cc8381d88234b9cdda2bb6a866aa)

4 years agouboot-envtools: ar71xx: add support for gl-ar150/-domino/-mifi
Kimmo Vuorinen [Wed, 22 Jan 2020 21:34:58 +0000 (23:34 +0200)]
uboot-envtools: ar71xx: add support for gl-ar150/-domino/-mifi

Add ubootenv uci config for gl-ar150, gl-domino and gl-mifi

Signed-off-by: Kimmo Vuorinen <kimmo.vuorinen@gmail.com>
[commit message/title facelift]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit dc6dfaac80f392baef1d0d7b06bb1fc19812e041)

4 years agoar71xx: change u-boot-env to read-write for gl-ar150/-domino/mifi
Kimmo Vuorinen [Wed, 22 Jan 2020 21:38:35 +0000 (23:38 +0200)]
ar71xx: change u-boot-env to read-write for gl-ar150/-domino/mifi

Change u-boot-env partitions to be mounted as read-write for gl-ar150,
gl-domino and gl-mifi so uboot-envtools support is possible.

Signed-off-by: Kimmo Vuorinen <kimmo.vuorinen@gmail.com>
[commit title/message facelift]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 2c1cfacddedc82c7a34eeb2a26529a5f3ab423d8)

4 years agourngd: update to version 2020-01-21
Petr Štetiar [Tue, 21 Jan 2020 16:03:21 +0000 (17:03 +0100)]
urngd: update to version 2020-01-21

c7f7b6b65b82 Tag version 1.0.2
236b7a0aef21 Fix blocked entropy generation

Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 3d8edd9bb4759f56df4482b3ed9c7fc26ed86028)

4 years agourngd: update to latest Git head
Petr Štetiar [Mon, 21 Oct 2019 08:37:51 +0000 (10:37 +0200)]
urngd: update to latest Git head

 * 40f939d57c67 Tag version 1.0.1
 * 9e758e6e6aec jitterentropy-rngd: update to version v1.1.0 + clang compile fix
 * 193586a25adc Fix wrong types in format strings used in debug build
 * d474977bb611 Add initial GitLab CI support

Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit ed67b137c748365d7a3be886a2f5309c3bc44c48)

4 years agoar71xx: ubnt-rocket-m-ti: fix RSSI LED definitions
Lech Perczak [Sun, 17 Nov 2019 19:57:10 +0000 (20:57 +0100)]
ar71xx: ubnt-rocket-m-ti: fix RSSI LED definitions

When mapping for RSSI LEDs was defined for interface wlan0 on
Ubiquiti Rocket M Titanium, it missed connection to actual interface.
Therefore create the mapping to interface, so RSSI LEDs work without
additional configuration, after starting rssileds service.

While at that, split RSSI into ~equal intervals for 6 LEDs,
and remove coefficients needed for PWM LEDs, as this board does not
support PWM LEDs.

Finally, for complete support, enable 'rssileds' package in per-device
rootfs, so the indicator works out of box.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
(cherry picked from commit 83708f233daceacebd1c49da44711cc87b49162a)

4 years agobrcm47xx: fix switch port order for Netgear WN2500RP V1
Walter Sonius [Fri, 27 Dec 2019 11:41:35 +0000 (12:41 +0100)]
brcm47xx: fix switch port order for Netgear WN2500RP V1

The Netgear WN2500RP V1 switch0 already works for LAN
however the port order for the LAN ports is inverted. Correct
physical port order watched from the back of the device is:
4 / 3 / 2 / 1
WAN port is absent on this device and therefore removed
from switch config.

Signed-off-by: Walter Sonius <walterav1984@gmail.com>
[move block to maintain alphabetic sorting]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 098cbc68ee23db589ed6f0d081fe26cc385462f2)

4 years agokirkwood: fix HDD LED labels for Zyxel NSA325 in 01_leds
Stephan Knauss [Sat, 18 Jan 2020 18:37:08 +0000 (19:37 +0100)]
kirkwood: fix HDD LED labels for Zyxel NSA325 in 01_leds

Change the LED labels for hdd1/hdd2 in 01_leds to match their
counterpart in DTS.

Signed-off-by: Stephan Knauss <openwrt@stephans-server.de>
[improve commit title and message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit fbf297be38a93b9ca1119e5aaffecd2299087aa5)

4 years agobrcm47xx: fix switch port order for Netgear WNR3500 V2
Walter Sonius [Fri, 27 Dec 2019 11:25:39 +0000 (12:25 +0100)]
brcm47xx: fix switch port order for Netgear WNR3500 V2

The Netgear WNR3500 V2 switch0 already works for WAN/LAN
however the port order for the LAN ports is inverted. Correct
physical port order watched from the back of the device is:
Internet / 4 / 3 / 2 / 1 this resembles the Linksys E3000 V1.

Verfied with imagebuilder edit FILES=/etc/board.d/01_network

Signed-off-by: Walter Sonius <walterav1984@gmail.com>
(cherry picked from commit cf2f1fc6871da0320afeefaa799af87fc7c0d1db)

4 years agoramips: rt305x: remove unnecessary mediatek,portmap
Sungbo Eo [Wed, 1 Jan 2020 12:34:33 +0000 (21:34 +0900)]
ramips: rt305x: remove unnecessary mediatek,portmap

"#mediatek,portmap" is not a valid property name.

If mediatek,portmap equals 0x0, then the esw driver ditches it and uses
the default value, 0x3f.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
(cherry picked from commit f87281b2956110f10af9eb23fc6d327dfde7ab42)

4 years agoramips: mt76x8: fix bogus mediatek,portmap
Sungbo Eo [Wed, 1 Jan 2020 12:34:10 +0000 (21:34 +0900)]
ramips: mt76x8: fix bogus mediatek,portmap

mt76x8 uses esw_rt3050 driver, which does not accept mediatek,portmap with
string values. Convert the strings to integers to make it work.

According to its switch setup, WRTnode 2P/2R have a WAN port at port 0,
so the correct value should be 0x3e.

tplink_8m.dtsi uses "llllw", but it does not match switch setups of any
device using the DTSI. Remove it from the DTSI and add correct value to DTS
for each device.

These devices have a WAN port at port 0. Set the value to 0x3e.
- tplink,archer-c20-v4
- tplink,archer-c50-v3
- tplink,tl-mr3420-v5
- tplink,tl-wr840n-v4
- tplink,tl-wr841n-v13
- tplink,tl-wr842n-v5

These devices have only one ethernet port. They don't need portmap setting.
- tplink,tl-wa801nd-v5
- tplink,tl-wr802n-v4
- tplink,tl-wr902ac-v3

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
(backported from commit 7a387bf9a0d73f7c581e2c9aeae6476588100e2c)
[removed TL-WR841N v14 which is not present in 19.07]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoramips: fix portmap for TP-Link Archer C50 v4
Maxim Anisimov [Wed, 18 Dec 2019 07:06:14 +0000 (10:06 +0300)]
ramips: fix portmap for TP-Link Archer C50 v4

According to 02_network portmap is wan=0 lan1=1 lan2=2 lan3=3 lan4=4

Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
(cherry picked from commit ebf535a6cfefef5b0afb74cb01c9a17ab242b85b)

4 years agoramips: mt7620/mt7621: remove invalid mediatek,portmap
Sungbo Eo [Wed, 1 Jan 2020 12:33:10 +0000 (21:33 +0900)]
ramips: mt7620/mt7621: remove invalid mediatek,portmap

mt7620 and mt7621 use mt7530 driver, which only accepts "llllw", "wllll",
and "lwlll" values.

According to its switch setup, Mi Router 3G v2 has a WAN port at port 4,
so the correct value should be "llllw".

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
(backported from commit d3c0a944059bb0d45c3b56278249100258378b0c)
[removed devices not in 19.07]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoramips: add factory image for Netgear R6350
Christoph Krapp [Thu, 29 Aug 2019 18:12:30 +0000 (20:12 +0200)]
ramips: add factory image for Netgear R6350

This adds factory image generation for all three
devices. These images can be flashed via WebUI
for easy installation.

Thanks to David Bauer for the inspiration.

Signed-off-by: Christoph Krapp <achterin@googlemail.com>
[altered commit to only include the R6350]
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 3c8df280a96bbd81357d6eb52845e6b5fa7162fe)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
4 years agoramips: add mt7615e support to Netgear R6350
Christoph Krapp [Thu, 29 Aug 2019 08:06:12 +0000 (10:06 +0200)]
ramips: add mt7615e support to Netgear R6350

Signed-off-by: Christoph Krapp <achterin@googlemail.com>
(cherry picked from commit 9861fa7abab97cb928aaa6cd5732a413d973ac95)

4 years agolibubox: update to version 2020-01-20
Petr Štetiar [Mon, 20 Jan 2020 15:22:07 +0000 (16:22 +0100)]
libubox: update to version 2020-01-20

 43a103ff17ee blobmsg: blobmsg_parse and blobmsg_parse_array oob read fixes
 5c0faaf4f5e2 tests: prefer dynamically allocated buffers
 1ffa41535369 blobmsg_json: prefer snprintf usage
 132ecb563da7 blobmsg: blobmsg_vprintf: prefer vsnprintf
 a2aab30fc918 jshn: prefer snprintf usage
 b0886a37f39a cmake: add a possibility to set library version
 a36ee96618a9 blobmsg: blobmsg_add_json_element() 64-bit values
 f0da3a4283b7 blobmsg_json: fix int16 serialization
 20a070f08139 tests: blobmsg/json: add more test cases
 379cd33d1992 tests: include json script shunit2 based testing

Acked-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 5c73bb12c82c078d8a93cb896348b41598ed9e19)

4 years agofstools: backport fix from version 2020-01-18
Petr Štetiar [Sat, 18 Jan 2020 13:49:11 +0000 (14:49 +0100)]
fstools: backport fix from version 2020-01-18

Contains only the FS#2735 fix:

 189b41b6b487 libblkid-tiny: fix f2fs labels by increasing label buffer

Commit adding new feature wasn't backported (needs patched kernel anyway):

 f5c7c1813f52 fstools: Add support to read-only MTD partitions (eg. recovery images)

Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 63000bfaf7163d97ac6feb343c7587e3d339e65e)

4 years agokernel: bump 4.14 to 4.14.166
Koen Vandeputte [Mon, 20 Jan 2020 11:04:33 +0000 (12:04 +0100)]
kernel: bump 4.14 to 4.14.166

Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
4 years agokernel: bump 4.14 to 4.14.165
Koen Vandeputte [Mon, 20 Jan 2020 10:01:44 +0000 (11:01 +0100)]
kernel: bump 4.14 to 4.14.165

Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
4 years agokernel: bump 4.14 to 4.14.164
Koen Vandeputte [Tue, 14 Jan 2020 13:42:28 +0000 (14:42 +0100)]
kernel: bump 4.14 to 4.14.164

Refreshed all patches.

Compile-tested on: ar71xx, cns3xxx, imx6
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
4 years agoramips: fix HiWiFi HC5962 status LED
DENG Qingfang [Thu, 16 Jan 2020 16:27:59 +0000 (00:27 +0800)]
ramips: fix HiWiFi HC5962 status LED

Match LED behavior to stock firmware:

Red: booting
White: running

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
(cherry picked from commit 9a3c9a96563c3c3fb1e15b791d9117b193fed7a6)

4 years agoramips: fix HiWiFi HC5962 switch configuration
DENG Qingfang [Thu, 16 Jan 2020 16:24:43 +0000 (00:24 +0800)]
ramips: fix HiWiFi HC5962 switch configuration

HC5962 has only 3 LAN ports, switch port 0 is unused

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
(backported from commit 68f49df31507454f86b72a5c1e250505176baed7)
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoramips: add kmod-mt7615e to Xiaomi Mi Router 3 Pro images
Ozgur Can Leonard [Fri, 2 Aug 2019 18:55:41 +0000 (21:55 +0300)]
ramips: add kmod-mt7615e to Xiaomi Mi Router 3 Pro images

Now that the mt76/mt7615e driver is in Openwrt, might as well use it.

Signed-off-by: Ozgur Can Leonard <ozgurcan@gmail.com>
(cherry picked from commit d7c082ba4f7de97b3708d1f4a064954ffc774778)

4 years agoar71xx/mikrotik: use ath10k-ct-smallbuffers for 64 MiB devices
Thomas Nixon [Sun, 5 Jan 2020 21:38:36 +0000 (21:38 +0000)]
ar71xx/mikrotik: use ath10k-ct-smallbuffers for 64 MiB devices

This image is only needed on one device (wAP AC); since this target is
going to be removed anyway it doesn't make sense to add an extra "low
RAM" image.

Fixes OOM issues on RouterBoard wAP AC.

Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
(cherry picked from commit 788c8485eb5b71ef7e7b2a2d3077772e526e9746)

4 years agoramips: fix wps leds/btn for TP-Link TL-WA801ND v5
Jan Alexander [Wed, 15 Jan 2020 20:12:33 +0000 (21:12 +0100)]
ramips: fix wps leds/btn for TP-Link TL-WA801ND v5

- fix color and active mode for existing wps led
- add green wps led
- add wps button

Signed-off-by: Jan Alexander <jan@nalx.net>
[wrap line]
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 26105974e7f9758cd4bc443ce0322983f818acd5)

4 years agohostapd: cleanup IBSS-RSN
Daniel Golle [Thu, 16 Jan 2020 08:13:51 +0000 (10:13 +0200)]
hostapd: cleanup IBSS-RSN

set noscan also for IBSS and remove redundant/obsolete variable.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 702c70264b388c2b47e171843f297f43c71b86b9)

4 years agocryptodev-linux: remove DEFAULT redefinition
Eneas U de Queiroz [Wed, 15 Jan 2020 18:28:05 +0000 (15:28 -0300)]
cryptodev-linux: remove DEFAULT redefinition

The 'DEFAULT:=m if ALL' line prevents the phase1 buildbots from building
the package, and users from downloading it, since they use 'ALL_KMODS=y'
but 'ALL' is not set.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit 9b25f833eb840527d07c47930de2c769115844f3)

4 years agomac80211: fix a page refcounting issue leading to leaks/crashes in rx A-MSDU decap
Felix Fietkau [Mon, 13 Jan 2020 18:43:40 +0000 (19:43 +0100)]
mac80211: fix a page refcounting issue leading to leaks/crashes in rx A-MSDU decap

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry-picked from commit 9501469e1146c6d76b7dde6391479314897ba4d8)

4 years agomac80211: fix sta TID stats leak on a few nl80211 calls
Felix Fietkau [Mon, 13 Jan 2020 18:43:20 +0000 (19:43 +0100)]
mac80211: fix sta TID stats leak on a few nl80211 calls

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry-picked from commit d5b3024139089e38f57bd1827273d7fba8497635)

4 years agoucert: update to version 2019-12-19
Petr Štetiar [Thu, 19 Dec 2019 12:25:03 +0000 (13:25 +0100)]
ucert: update to version 2019-12-19

14a279411cff fix certificate blob parsing vulnerability by using blob_parse_untrusted
19a7225ac018 fix leaking memory in cert_dump_blob
9dba44ddd4f5 fix possibly garbage value returned in cert_process_revoker
4462ff9dedfa add cram based unit tests
5fe64b5606aa cmake: split usign bits into static library
5d7626a2b6d8 cmake: reindent the file
e284ed941972 cmake: enable hardening compiler flags and fix the reported issues
7e5390666347 add initial GitLab CI support
fa0bf4ef45b1 cmake: add proper include and library dependencies

Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 2544cb1ba377149a8663c7ac4a625d5399993e33)

4 years agoramips: mt7621: disable images for gehua_ghl-r-001
Petr Štetiar [Mon, 13 Jan 2020 16:52:46 +0000 (17:52 +0100)]
ramips: mt7621: disable images for gehua_ghl-r-001

This device OOPs during the boot due to broken flash. It can be probably
fixed with `broken-flash-reset` once ramips is on 4.19 kernel.

So disable images for this device until its fixed.

Ref: FS#2695, PR#2483
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 28080d54d217fb4ab112e079f69462fee695dbf8)

4 years agoramips: fix leds for TP-Link Archer C20 v4
Maxim Anisimov [Wed, 18 Dec 2019 06:48:38 +0000 (09:48 +0300)]
ramips: fix leds for TP-Link Archer C20 v4

- add "gpio" group for wan_orange led
- use tpt triggers for wifi led indication
- add wifi 5 GHz led support

Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
[slight commit message adjustment, backport]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 3a538db60abfc50b47ce1774f66d489700a50c00)

4 years agoath79: add SUPPORTED_DEVICES for TP-Link TL-WR841N/ND v9 to v12
Adrian Schmutzler [Mon, 22 Jul 2019 15:42:39 +0000 (17:42 +0200)]
ath79: add SUPPORTED_DEVICES for TP-Link TL-WR841N/ND v9 to v12

In ar71xx, v10 and v12 did not have separate board_name.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 7ed643d2052381bdd0e9680ca964eb87700cbc5e)