From: Josua Mayer Date: Thu, 26 Dec 2019 11:08:16 +0000 (+0100) Subject: mvebu: fix LAN/WAN port assignment on ClearFog Base/Pro X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=9d2dea8302f5bafb44f83af74c11213673414b42;p=openwrt%2Fstaging%2Fyousong.git mvebu: fix LAN/WAN port assignment on ClearFog Base/Pro The comments in code already describe the intended lan / wan assignment: lan: switch wan: standalone ethernet and sfp Update the interface handles to match the comments, as observed with OpenWRT-19.07-rc2 on a Clearfog Pro Rev 2.0. This also matches the effective assignment on master, while the actual interface names (ethX) are different due to the reassignment in 06_set_iface_mac, which is included in 19.07 but was dropped for master. Signed-off-by: Josua Mayer [extend commit message] Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/mvebu/base-files/etc/board.d/02_network b/target/linux/mvebu/base-files/etc/board.d/02_network index 08819104d2..b96faa5c4a 100755 --- a/target/linux/mvebu/base-files/etc/board.d/02_network +++ b/target/linux/mvebu/base-files/etc/board.d/02_network @@ -50,16 +50,16 @@ marvell,axp-gp) ucidef_set_interface_lan "eth0 eth1 eth2 eth3" ;; solidrun,clearfog*a1) - # eth0 is standalone ethernet - # eth1 is switch (-pro) or standalone ethernet (-base) - # eth2 is SFP - ucidef_set_interfaces_lan_wan "eth1" "eth0 eth2" + # eth2 is standalone ethernet + # eth0 is switch (-pro) or standalone ethernet (-base) + # eth1 is SFP + ucidef_set_interfaces_lan_wan "eth0" "eth2 eth1" # if switch exists (clearfog-pro) - # switch port 5 is connected to eth1 + # switch port 5 is connected to eth0 swconfig list 2>&1 | grep -q switch0 && \ ucidef_add_switch "switch0" \ - "0:lan:5" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5u@eth1" "6:lan:6" + "0:lan:5" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5u@eth0" "6:lan:6" ;; *) ucidef_set_interface_lan "eth0"