From: Jonas Gorski <jogo@openwrt.org>
Date: Sun, 27 May 2012 13:22:46 +0000 (+0000)
Subject: bcm63xx: enable bcm6328 support and required drivers
X-Git-Tag: reboot~13813
X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=4aa43122ab59a91379bcc3720489d35a7088a64a;p=openwrt%2Fopenwrt.git

bcm63xx: enable bcm6328 support and required drivers

BCM6328 support is in a usable state, with the following issues

 * internal switch port not configurable
 * external phys not supported
 * broadcom wifis will probably not work correctly
 * and all other generic bcm63xx issues (so yes, still no ADSL)

SVN-Revision: 31883
---

diff --git a/target/linux/brcm63xx/config-3.3 b/target/linux/brcm63xx/config-3.3
index 0de9fcdc09..42ffabce91 100644
--- a/target/linux/brcm63xx/config-3.3
+++ b/target/linux/brcm63xx/config-3.3
@@ -6,7 +6,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_AUDIT=y
 CONFIG_AUDIT_GENERIC=y
 CONFIG_BCM63XX=y
-# CONFIG_BCM63XX_CPU_6328 is not set
+CONFIG_BCM63XX_CPU_6328=y
 CONFIG_BCM63XX_CPU_6338=y
 CONFIG_BCM63XX_CPU_6345=y
 CONFIG_BCM63XX_CPU_6348=y
@@ -88,6 +88,7 @@ CONFIG_IRQ_CPU=y
 CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_KEXEC=y
 CONFIG_LEDS_GPIO=y
+CONFIG_M25PXX_USE_FAST_READ=y
 CONFIG_MDIO_BOARDINFO=y
 CONFIG_MIPS=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -104,6 +105,7 @@ CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_M25P80=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
@@ -112,7 +114,8 @@ CONFIG_NEED_PER_CPU_KM=y
 CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_PCI=y
-# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCIEAER is not set
+CONFIG_PCIEPORTBUS=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PHYLIB=y
@@ -126,7 +129,7 @@ CONFIG_SERIAL_BCM63XX=y
 CONFIG_SERIAL_BCM63XX_CONSOLE=y
 CONFIG_SPI=y
 # CONFIG_SPI_BCM63XX is not set
-# CONFIG_SPI_BCM63XX_HSSPI is not set
+CONFIG_SPI_BCM63XX_HSSPI=y
 CONFIG_SPI_BITBANG=y
 CONFIG_SPI_GPIO=y
 CONFIG_SPI_MASTER=y