configs: Update Meson GX configs
authorNeil Armstrong <narmstrong@baylibre.com>
Thu, 14 Jun 2018 11:43:41 +0000 (13:43 +0200)
committerTom Rini <trini@konsulko.com>
Tue, 19 Jun 2018 11:31:47 +0000 (07:31 -0400)
Enable USB on all Amlogic Meson GXL based board.
Enable Regulator support on all boards.
Enable ADC support on the LibreTech-CC board.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
configs/khadas-vim_defconfig
configs/libretech-cc_defconfig
configs/odroid-c2_defconfig
configs/p212_defconfig

index 49a653f0424b1c82fdc1af510bd0a80185e2c4ec..1eb13df4b48539a04eb351f0266a53974b593e49 100644 (file)
@@ -16,10 +16,15 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
 CONFIG_OF_CONTROL=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM_GPIO=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_RESET=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_MESON_GX=y
 CONFIG_PHY_ADDR_ENABLE=y
@@ -34,3 +39,12 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_DEBUG_UART_SKIP_INIT=y
 CONFIG_MESON_SERIAL=y
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_PHY=y
+CONFIG_MESON_GXL_USB_PHY=y
index 7ba2fa1fe2da29d33dfeafaddb1218a1adee906e..d4f2f58c8a7e25e2b0d50abb31e8fe0291893fbe 100644 (file)
@@ -13,13 +13,21 @@ CONFIG_OF_BOARD_SETUP=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
+CONFIG_CMD_ADC=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
+CONFIG_ADC=y
+CONFIG_SARADC_MESON=y
 CONFIG_OF_CONTROL=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM_GPIO=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_RESET=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_MESON_GX=y
 CONFIG_PHY_ADDR_ENABLE=y
@@ -34,3 +42,12 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_DEBUG_UART_SKIP_INIT=y
 CONFIG_MESON_SERIAL=y
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_PHY=y
+CONFIG_MESON_GXL_USB_PHY=y
index ecc8d03e318f593c2c145d79a1d0c3af07cd0bd9..9be69adcac9e32901b252c921f31cc635b03071a 100644 (file)
@@ -18,11 +18,15 @@ CONFIG_CMD_I2C=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
 CONFIG_OF_CONTROL=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_MESON=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_RESET=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_MESON_GX=y
 CONFIG_DM_ETH=y
index 344c04aa8d58c13c2cee4dfd564766facbd82153..f9b282e2daaea12f729e50c409b8f94fe7846f01 100644 (file)
@@ -16,10 +16,15 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
 CONFIG_OF_CONTROL=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM_GPIO=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_RESET=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_MESON_GX=y
 CONFIG_PHY_ADDR_ENABLE=y
@@ -34,3 +39,12 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_DEBUG_UART_SKIP_INIT=y
 CONFIG_MESON_SERIAL=y
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_PHY=y
+CONFIG_MESON_GXL_USB_PHY=y