bmips: bcm6348-enet: add PHY support
authorÁlvaro Fernández Rojas <noltari@gmail.com>
Wed, 29 Mar 2023 14:17:04 +0000 (16:17 +0200)
committerÁlvaro Fernández Rojas <noltari@gmail.com>
Wed, 29 Mar 2023 14:26:42 +0000 (16:26 +0200)
We should ensure that the PHY is properly configured.
This is specially needed in devices using the internal PHY for ethernet0.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
target/linux/bmips/dts/bcm6358-huawei-hg556a-b.dts
target/linux/bmips/files/drivers/net/ethernet/broadcom/bcm6348-enet.c

index 2ad9460a9c753867f86d30b0f00e640455d8cb25..273470b1bd3410fedafaeb928686f5f0d25d7832 100644 (file)
 
        nvmem-cells = <&macaddr_cfe_6a0>;
        nvmem-cell-names = "mac-address";
+
+       phy-mode = "mii";
+
+       fixed-link {
+               speed = <100>;
+               full-duplex;
+       };
 };
 
 &iudma {
index 06a9df1c0a569c016e1c2b28753355ed60f60d2e..75e85aa0f32f141b1fe2b68044d5e70014242f7e 100644 (file)
@@ -489,6 +489,11 @@ struct bcm6348_emac {
 
        /* external mii bus */
        bool ext_mii;
+
+       /* phy */
+       int old_link;
+       int old_duplex;
+       int old_pause;
 };
 
 static inline void emac_writel(struct bcm6348_emac *emac, u32 val, u32 off)
@@ -968,6 +973,96 @@ static void bcm6348_emac_disable_mac(struct bcm6348_emac *emac)
        } while (limit--);
 }
 
+/*
+ * set emac duplex parameters
+ */
+static void bcm6348_emac_set_duplex(struct bcm6348_emac *emac, int fullduplex)
+{
+       u32 val;
+
+       val = emac_readl(emac, ENET_TXCTL_REG);
+       if (fullduplex)
+               val |= ENET_TXCTL_FD_MASK;
+       else
+               val &= ~ENET_TXCTL_FD_MASK;
+       emac_writel(emac, val, ENET_TXCTL_REG);
+}
+
+/*
+ * set emac flow control parameters
+ */
+static void bcm6348_emac_set_flow(struct bcm6348_emac *emac, bool rx_en, bool tx_en)
+{
+       struct bcm6348_iudma *iudma = emac->iudma;
+       u32 val;
+
+       val = emac_readl(emac, ENET_RXCFG_REG);
+       if (rx_en)
+               val |= ENET_RXCFG_ENFLOW_MASK;
+       else
+               val &= ~ENET_RXCFG_ENFLOW_MASK;
+       emac_writel(emac, val, ENET_RXCFG_REG);
+
+       dmas_writel(iudma, emac->rx_desc_dma, DMAS_RSTART_REG, emac->rx_chan);
+       dmas_writel(iudma, emac->tx_desc_dma, DMAS_RSTART_REG, emac->tx_chan);
+
+       val = dma_readl(iudma, DMA_CFG_REG);
+       if (tx_en)
+               val |= DMA_CFG_FLOWCH_MASK(emac->rx_chan);
+       else
+               val &= ~DMA_CFG_FLOWCH_MASK(emac->rx_chan);
+       dma_writel(iudma, val, DMA_CFG_REG);
+}
+
+/*
+ * adjust emac phy
+ */
+static void bcm6348_emac_adjust_phy(struct net_device *ndev)
+{
+       struct phy_device *phydev = ndev->phydev;
+       struct bcm6348_emac *emac = netdev_priv(ndev);
+       struct platform_device *pdev = emac->pdev;
+       struct device *dev = &pdev->dev;
+       bool status_changed = false;
+
+       if (emac->old_link != phydev->link) {
+               status_changed = true;
+               emac->old_link = phydev->link;
+       }
+
+       if (phydev->link && phydev->duplex != emac->old_duplex) {
+               bcm6348_emac_set_duplex(emac, phydev->duplex == DUPLEX_FULL);
+               status_changed = true;
+               emac->old_duplex = phydev->duplex;
+       }
+
+       if (phydev->link && phydev->pause != emac->old_pause) {
+               bool rx_pause_en, tx_pause_en;
+
+               if (phydev->pause) {
+                       rx_pause_en = true;
+                       tx_pause_en = true;
+               } else {
+                       rx_pause_en = false;
+                       tx_pause_en = false;
+               }
+
+               bcm6348_emac_set_flow(emac, rx_pause_en, tx_pause_en);
+               status_changed = true;
+               emac->old_pause = phydev->pause;
+       }
+
+       if (status_changed)
+               dev_info(dev, "%s: phy link %s %s/%s/%s/%s\n",
+                        ndev->name,
+                        phydev->link ? "UP" : "DOWN",
+                        phy_modes(phydev->interface),
+                        phy_speed_to_str(phydev->speed),
+                        phy_duplex_to_str(phydev->duplex),
+                        phydev->pause ? "rx/tx" : "off");
+}
+
+
 static int bcm6348_emac_open(struct net_device *ndev)
 {
        struct bcm6348_emac *emac = netdev_priv(ndev);
@@ -1133,6 +1228,9 @@ static int bcm6348_emac_open(struct net_device *ndev)
        dmac_writel(iudma, DMAC_IR_PKTDONE_MASK,
                    DMAC_IRMASK_REG, emac->tx_chan);
 
+       if (ndev->phydev)
+               phy_start(ndev->phydev);
+
        netif_carrier_on(ndev);
        netif_start_queue(ndev);
 
@@ -1171,6 +1269,9 @@ out_freeirq_rx:
        free_irq(emac->irq_rx, ndev);
 
 out_freeirq:
+       if (ndev->phydev)
+               phy_disconnect(ndev->phydev);
+
        return ret;
 }
 
@@ -1183,6 +1284,8 @@ static int bcm6348_emac_stop(struct net_device *ndev)
 
        netif_stop_queue(ndev);
        napi_disable(&emac->napi);
+       if (ndev->phydev)
+               phy_stop(ndev->phydev);
        del_timer_sync(&emac->rx_timeout);
 
        /* mask all interrupts */
@@ -1454,6 +1557,10 @@ static int bcm6348_emac_probe(struct platform_device *pdev)
        emac->tx_ring_size = ENET_DEF_TX_DESC;
        emac->copybreak = ENET_DEF_CPY_BREAK;
 
+       emac->old_link = 0;
+       emac->old_duplex = -1;
+       emac->old_pause = -1;
+
        of_get_mac_address(node, ndev->dev_addr);
        if (is_valid_ether_addr(ndev->dev_addr)) {
                dev_info(dev, "mtd mac %pM\n", ndev->dev_addr);
@@ -1543,6 +1650,11 @@ static int bcm6348_emac_probe(struct platform_device *pdev)
 
        netif_carrier_off(ndev);
 
+       ndev->phydev = of_phy_get_and_connect(ndev, node,
+                                             bcm6348_emac_adjust_phy);
+       if (IS_ERR_OR_NULL(ndev->phydev))
+               dev_warn(dev, "PHY not found!\n");
+
        dev_info(dev, "%s at 0x%px, IRQ %d\n", ndev->name, emac->base,
                 ndev->irq);