make use of the marvell switch in the atheros port
authorFelix Fietkau <nbd@openwrt.org>
Sun, 20 Apr 2008 08:39:16 +0000 (08:39 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Sun, 20 Apr 2008 08:39:16 +0000 (08:39 +0000)
SVN-Revision: 10877

target/linux/atheros/base-files/etc/preinit.arch
target/linux/atheros/base-files/etc/uci-defaults/network

index d02e407be7caf9ac73c4b15eb963db1100cdbbd7..8a1bd98cd8939c8c8c39c3a3a423ebcbd162a3ce 100755 (executable)
@@ -1,6 +1,7 @@
 # reset button only supported on ar5315+ at the moment
 grep 'Atheros AR231[567]' /proc/cpuinfo > /dev/null && {
-       if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" ]; then
+       if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
+            -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:1f" ]; then
                vconfig set_name_type DEV_PLUS_VID_NO_PAD
                ifconfig eth0 up
                vconfig add eth0 0
@@ -12,7 +13,8 @@ grep 'Atheros AR231[567]' /proc/cpuinfo > /dev/null && {
        netmsg 192.168.1.255 "Press reset now, to enter Failsafe!"
        ifconfig "$ifname" 0.0.0.0 down
        sleep 2
-       if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" ]; then
+       if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
+            -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:1f" ]; then
                vconfig rem eth0.0
                ifconfig eth0 down
        fi
index e2fe6cd5e3c7a5425ddabee72d8fc9e297585342..61a790f8685a605c74efbd75215912be023a3179 100644 (file)
@@ -1,5 +1,6 @@
 #!/bin/sh
-if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" ]; then
+if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
+     -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:1f" ]; then
        uci batch <<EOF
 set network.lan.ifname=eth0.0
 set network.wan=interface