-From 961c38974fa5b34d6232d7485120e4392d279ab4 Mon Sep 17 00:00:00 2001
+From 527a3ac9bdf81da4b7160ce3cea57f28a0e5eb64 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 13 Jan 2021 12:14:06 +0100
Subject: [PATCH] arm64: dts: broadcom: bcm4908: describe internal switch
+
+&mdio {
+ /* lan8 */
-+ phy@0 {
++ ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ /* lan7 */
-+ phy@1 {
++ ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ /* lan4 */
-+ phy@2 {
++ ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ /* lan3 */
-+ phy@3 {
++ ethernet-phy@3 {
+ reg = <3>;
+ };
+};
status = "disabled";
};
+
-+ switch@80000 {
++ ethernet-switch@80000 {
+ compatible = "simple-bus";
+ #size-cells = <1>;
+ #address-cells = <1>;
+ ranges = <0 0x80000 0x50000>;
+
-+ switch@0 {
++ ethernet-switch@0 {
+ compatible = "brcm,bcm4908-switch";
+ reg = <0x0 0x40000>,
+ <0x40000 0x110>,
+ compatible = "brcm,unimac-mdio";
+ reg = <0x405c0 0x8>;
+ reg-names = "mdio";
-+ #size-cells = <1>;
-+ #address-cells = <0>;
++ #size-cells = <0>;
++ #address-cells = <1>;
+
-+ phy8: phy@8 {
++ phy8: ethernet-phy@8 {
+ reg = <8>;
+ };
+
-+ phy9: phy@9 {
++ phy9: ethernet-phy@9 {
+ reg = <9>;
+ };
+
-+ phy10: phy@a {
++ phy10: ethernet-phy@a {
+ reg = <10>;
+ };
+
-+ phy11: phy@b {
++ phy11: ethernet-phy@b {
+ reg = <11>;
+ };
+
-+ phy12: phy@c {
++ phy12: ethernet-phy@c {
+ reg = <12>;
+ };
+ };
--- /dev/null
+From 3c321ba794ca6383a4aa68ea803e18cc6ad44412 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Fri, 19 Feb 2021 06:50:26 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcm4908: describe USB PHY
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+BCM4908 uses slightly modified STB family USB PHY. It handles OHCI/EHCI
+and XHCI. It requires powering up using the PMB.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ .../bcm4908/bcm4906-netgear-r8000p.dts | 17 +++++++++++++
+ .../bcm4908/bcm4908-asus-gt-ac5300.dts | 17 +++++++++++++
+ .../boot/dts/broadcom/bcm4908/bcm4908.dtsi | 25 ++++++++++++++++---
+ 3 files changed, 55 insertions(+), 4 deletions(-)
+
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+@@ -26,6 +26,23 @@
+ };
+ };
+
++&usb_phy {
++ brcm,ioc = <1>;
++ status = "okay";
++};
++
++&ehci {
++ status = "okay";
++};
++
++&ohci {
++ status = "okay";
++};
++
++&xhci {
++ status = "okay";
++};
++
+ &nandcs {
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
+@@ -44,6 +44,23 @@
+ };
+ };
+
++&usb_phy {
++ brcm,ioc = <1>;
++ status = "okay";
++};
++
++&ehci {
++ status = "okay";
++};
++
++&ohci {
++ status = "okay";
++};
++
++&xhci {
++ status = "okay";
++};
++
+ &ports {
+ port@0 {
+ label = "lan2";
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+@@ -2,6 +2,8 @@
+
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
++#include <dt-bindings/phy/phy.h>
++#include <dt-bindings/soc/bcm-pmb.h>
+
+ /dts-v1/;
+
+@@ -110,24 +112,39 @@
+ #size-cells = <1>;
+ ranges = <0x00 0x00 0x80000000 0x281000>;
+
+- usb@c300 {
++ usb_phy: usb-phy@c200 {
++ compatible = "brcm,bcm4908-usb-phy";
++ reg = <0xc200 0x100>;
++ reg-names = "ctrl";
++ power-domains = <&pmb BCM_PMB_HOST_USB>;
++ dr_mode = "host";
++ brcm,has-xhci;
++ brcm,has-eohci;
++ #phy-cells = <1>;
++ status = "disabled";
++ };
++
++ ehci: usb@c300 {
+ compatible = "generic-ehci";
+ reg = <0xc300 0x100>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
++ phys = <&usb_phy PHY_TYPE_USB2>;
+ status = "disabled";
+ };
+
+- usb@c400 {
++ ohci: usb@c400 {
+ compatible = "generic-ohci";
+ reg = <0xc400 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
++ phys = <&usb_phy PHY_TYPE_USB2>;
+ status = "disabled";
+ };
+
+- usb@d000 {
++ xhci: usb@d000 {
+ compatible = "generic-xhci";
+ reg = <0xd000 0x8c8>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
++ phys = <&usb_phy PHY_TYPE_USB3>;
+ status = "disabled";
+ };
+
+@@ -222,7 +239,7 @@
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+- power-controller@2800c0 {
++ pmb: power-controller@2800c0 {
+ compatible = "brcm,bcm4908-pmb";
+ reg = <0x2800c0 0x40>;
+ #power-domain-cells = <1>;
--- /dev/null
+From b1bbe48eec190b6a35f400c5a3ec6b0fc8fc3fe6 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Fri, 19 Feb 2021 06:50:27 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcm4908: describe Ethernet controller
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+BCM4908 SoCs have an integrated Ethernet controller.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ .../boot/dts/broadcom/bcm4908/bcm4908.dtsi | 19 +++++++++++++++++++
+ 1 file changed, 19 insertions(+)
+
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+@@ -112,6 +112,14 @@
+ #size-cells = <1>;
+ ranges = <0x00 0x00 0x80000000 0x281000>;
+
++ enet: ethernet@2000 {
++ compatible = "brcm,bcm4908-enet";
++ reg = <0x2000 0x1000>;
++
++ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "rx";
++ };
++
+ usb_phy: usb-phy@c200 {
+ compatible = "brcm,bcm4908-usb-phy";
+ reg = <0xc200 0x100>;
+@@ -199,6 +207,17 @@
+ phy-mode = "internal";
+ phy-handle = <&phy11>;
+ };
++
++ port@8 {
++ reg = <8>;
++ phy-mode = "internal";
++ ethernet = <&enet>;
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
+ };
+ };
+
--- /dev/null
+From 406e98afffe975982f63ea5d21bf9a47a81b56ee Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Fri, 19 Feb 2021 06:50:28 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+R8000P model has 4 LAN ports and 1 WAN port.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ .../bcm4908/bcm4906-netgear-r8000p.dts | 25 +++++++++++++++++++
+ 1 file changed, 25 insertions(+)
+
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+@@ -43,6 +43,31 @@
+ status = "okay";
+ };
+
++&ports {
++ port@0 {
++ label = "lan4";
++ };
++
++ port@1 {
++ label = "lan3";
++ };
++
++ port@2 {
++ label = "lan2";
++ };
++
++ port@3 {
++ label = "lan1";
++ };
++
++ port@7 {
++ reg = <7>;
++ phy-mode = "internal";
++ phy-handle = <&phy12>;
++ label = "wan";
++ };
++};
++
+ &nandcs {
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
--- /dev/null
+From 6224415c0389ba6661825746312163a64ece8f3a Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Fri, 19 Feb 2021 06:50:29 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P
+ LEDs
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+There are a few more GPIO connected LEDs there didn't get described
+initially.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ .../bcm4908/bcm4906-netgear-r8000p.dts | 50 ++++++++++++++++++-
+ 1 file changed, 49 insertions(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+@@ -18,11 +18,59 @@
+ leds {
+ compatible = "gpio-leds";
+
+- wps {
++ led-power-white {
++ function = LED_FUNCTION_POWER;
++ color = <LED_COLOR_ID_WHITE>;
++ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
++ };
++
++ led-power-amber {
++ function = LED_FUNCTION_POWER;
++ color = <LED_COLOR_ID_AMBER>;
++ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
++ };
++
++ led-wps {
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
++
++ led-2ghz {
++ function = "2ghz";
++ color = <LED_COLOR_ID_WHITE>;
++ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
++ };
++
++ led-5ghz-1 {
++ function = "5ghz-1";
++ color = <LED_COLOR_ID_WHITE>;
++ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
++ };
++
++ led-5ghz-2 {
++ function = "5ghz-2";
++ color = <LED_COLOR_ID_WHITE>;
++ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
++ };
++
++ led-usb2 {
++ function = "usb2";
++ color = <LED_COLOR_ID_WHITE>;
++ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
++ };
++
++ led-usb3 {
++ function = "usb3";
++ color = <LED_COLOR_ID_WHITE>;
++ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
++ };
++
++ led-wifi {
++ function = "wifi";
++ color = <LED_COLOR_ID_WHITE>;
++ gpios = <&gpio0 56 GPIO_ACTIVE_LOW>;
++ };
+ };
+ };
+
--- /dev/null
+From cbaca2c467dc25a163107e14a53b7925214eab17 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Fri, 19 Feb 2021 06:50:30 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcm4908: describe firmware partitions
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+BCM4908 bootloader supports multiple firmware partitions and has its own
+bindings defined for them.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ .../dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts | 1 +
+ .../dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 12 +++++++++++-
+ 2 files changed, 12 insertions(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+@@ -135,6 +135,7 @@
+ };
+
+ partition@100000 {
++ compatible = "brcm,bcm4908-firmware";
+ label = "firmware";
+ reg = <0x100000 0x4400000>;
+ };
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
+@@ -122,7 +122,7 @@
+ #size-cells = <0>;
+
+ partitions {
+- compatible = "fixed-partitions";
++ compatible = "brcm,bcm4908-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+@@ -130,5 +130,15 @@
+ label = "cferom";
+ reg = <0x0 0x100000>;
+ };
++
++ partition@100000 {
++ compatible = "brcm,bcm4908-firmware";
++ reg = <0x100000 0x5700000>;
++ };
++
++ partition@5800000 {
++ compatible = "brcm,bcm4908-firmware";
++ reg = <0x5800000 0x5700000>;
++ };
+ };
+ };
--- /dev/null
+From a348ff97ffb840b9d74b0e64b3e0e6002187d224 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Tue, 9 Mar 2021 19:44:09 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcm4908: fix switch parent node name
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Ethernet switch and MDIO are grouped using "simple-bus". It's not
+allowed to use "ethernet-switch" node name as it isn't a switch. Replace
+it with "bus".
+
+Fixes: 527a3ac9bdf8 ("arm64: dts: broadcom: bcm4908: describe internal switch")
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+@@ -156,7 +156,7 @@
+ status = "disabled";
+ };
+
+- ethernet-switch@80000 {
++ bus@80000 {
+ compatible = "simple-bus";
+ #size-cells = <1>;
+ #address-cells = <1>;
--- /dev/null
+From b3de2a12d1a61d90a4d86c9840acc7d05066137f Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Wed, 10 Mar 2021 08:46:02 +0100
+Subject: [PATCH] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+One more BCM4906 based device.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Reviewed-by: Rob Herring <robh@kernel.org>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
++++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
+@@ -21,6 +21,7 @@ properties:
+ items:
+ - enum:
+ - netgear,r8000p
++ - tplink,archer-c2300-v1
+ - const: brcm,bcm4906
+ - const: brcm,bcm4908
+
--- /dev/null
+From 6a30934a5470a0ce7ea32b0c6b600accfae94b1a Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Wed, 10 Mar 2021 08:46:03 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Archer C2300 V1 is a home router based on the BCM4906 (2 CPU cores). It
+has 512 MiB of RAM, NAND flash, USB 2.0 and USB 3.0 ports, 4 LAN ports,
+1 WAN port.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm64/boot/dts/broadcom/bcm4908/Makefile | 1 +
+ .../bcm4906-tplink-archer-c2300-v1.dts | 182 ++++++++++++++++++
+ 2 files changed, 183 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
+
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
++++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
+@@ -1,3 +1,4 @@
+ # SPDX-License-Identifier: GPL-2.0
+ dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb
++dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb
+ dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
+@@ -0,0 +1,182 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/leds/common.h>
++
++#include "bcm4906.dtsi"
++
++/ {
++ compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908";
++ model = "TP-Link Archer C2300 V1";
++
++ memory@0 {
++ device_type = "memory";
++ reg = <0x00 0x00 0x00 0x20000000>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ led-power {
++ function = LED_FUNCTION_POWER;
++ color = <LED_COLOR_ID_BLUE>;
++ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
++ };
++
++ led-2ghz {
++ function = "2ghz";
++ color = <LED_COLOR_ID_BLUE>;
++ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
++ };
++
++ led-5ghz {
++ function = "5ghz";
++ color = <LED_COLOR_ID_BLUE>;
++ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
++ };
++
++ led-wan-amber {
++ function = LED_FUNCTION_WAN;
++ color = <LED_COLOR_ID_AMBER>;
++ gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
++ };
++
++ led-wan-blue {
++ function = LED_FUNCTION_WAN;
++ color = <LED_COLOR_ID_BLUE>;
++ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
++ };
++
++ led-lan {
++ function = LED_FUNCTION_LAN;
++ color = <LED_COLOR_ID_BLUE>;
++ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
++ };
++
++ led-wps {
++ function = LED_FUNCTION_WPS;
++ color = <LED_COLOR_ID_BLUE>;
++ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
++ };
++
++ led-usb2 {
++ function = "usb2";
++ color = <LED_COLOR_ID_BLUE>;
++ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
++ };
++
++ led-usb3 {
++ function = "usbd3";
++ color = <LED_COLOR_ID_BLUE>;
++ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
++ };
++
++ led-brightness {
++ function = LED_FUNCTION_BACKLIGHT;
++ color = <LED_COLOR_ID_WHITE>;
++ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ gpio-keys-polled {
++ compatible = "gpio-keys-polled";
++ poll-interval = <100>;
++
++ brightness {
++ label = "LEDs";
++ linux,code = <KEY_BRIGHTNESS_ZERO>;
++ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
++ };
++
++ wps {
++ label = "WPS";
++ linux,code = <KEY_WPS_BUTTON>;
++ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
++ };
++
++ wifi {
++ label = "WiFi";
++ linux,code = <KEY_RFKILL>;
++ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
++ };
++
++ restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&usb_phy {
++ brcm,ioc = <1>;
++ status = "okay";
++};
++
++&ehci {
++ status = "okay";
++};
++
++&ohci {
++ status = "okay";
++};
++
++&xhci {
++ status = "okay";
++};
++
++&ports {
++ port@0 {
++ label = "lan4";
++ };
++
++ port@1 {
++ label = "lan3";
++ };
++
++ port@2 {
++ label = "lan2";
++ };
++
++ port@3 {
++ label = "lan1";
++ };
++
++ port@7 {
++ reg = <7>;
++ phy-mode = "internal";
++ phy-handle = <&phy12>;
++ label = "wan";
++ };
++};
++
++&nandcs {
++ nand-ecc-strength = <4>;
++ nand-ecc-step-size = <512>;
++ nand-on-flash-bbt;
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ partitions {
++ compatible = "brcm,bcm4908-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ partition@0 {
++ label = "cferom";
++ reg = <0x0 0x100000>;
++ };
++
++ partition@100000 {
++ compatible = "brcm,bcm4908-firmware";
++ reg = <0x100000 0x3900000>;
++ };
++
++ partition@5800000 {
++ compatible = "brcm,bcm4908-firmware";
++ reg = <0x3a00000 0x3900000>;
++ };
++ };
++};
--- /dev/null
+From 5ccb9f9cf05bbd729430c6d6d30d40c96a15c56a Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Fri, 12 Mar 2021 12:01:20 +0100
+Subject: [PATCH] arm64: dts: broadcom: bcm4908: set Asus GT-AC5300 port 7 PHY
+ mode
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Port 7 is connected to the external BCM53134S switch using RGMII.
+
+Fixes: 527a3ac9bdf8 ("arm64: dts: broadcom: bcm4908: describe internal switch")
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
++++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
+@@ -82,6 +82,7 @@
+ port@7 {
+ label = "sw";
+ reg = <7>;
++ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 15 Feb 2021 19:46:54 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: describe USB PHY
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 uses slightly modified STB family USB PHY. It handles OHCI/EHCI
-and XHCI. It requires powering up using the PMB.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- .../bcm4908/bcm4906-netgear-r8000p.dts | 17 +++++++++++++
- .../bcm4908/bcm4908-asus-gt-ac5300.dts | 17 +++++++++++++
- .../boot/dts/broadcom/bcm4908/bcm4908.dtsi | 25 ++++++++++++++++---
- 3 files changed, 55 insertions(+), 4 deletions(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-@@ -26,6 +26,23 @@
- };
- };
-
-+&usb_phy {
-+ brcm,ioc = <1>;
-+ status = "okay";
-+};
-+
-+&ehci {
-+ status = "okay";
-+};
-+
-+&ohci {
-+ status = "okay";
-+};
-+
-+&xhci {
-+ status = "okay";
-+};
-+
- &nandcs {
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-@@ -44,6 +44,23 @@
- };
- };
-
-+&usb_phy {
-+ brcm,ioc = <1>;
-+ status = "okay";
-+};
-+
-+&ehci {
-+ status = "okay";
-+};
-+
-+&ohci {
-+ status = "okay";
-+};
-+
-+&xhci {
-+ status = "okay";
-+};
-+
- &ports {
- port@0 {
- label = "lan2";
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -2,6 +2,8 @@
-
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include <dt-bindings/phy/phy.h>
-+#include <dt-bindings/soc/bcm-pmb.h>
-
- /dts-v1/;
-
-@@ -110,24 +112,39 @@
- #size-cells = <1>;
- ranges = <0x00 0x00 0x80000000 0x281000>;
-
-- usb@c300 {
-+ usb_phy: usb-phy@c200 {
-+ compatible = "brcm,bcm4908-usb-phy";
-+ reg = <0xc200 0x100>;
-+ reg-names = "crtl";
-+ power-domains = <&pmb BCM_PMB_HOST_USB>;
-+ dr_mode = "host";
-+ brcm,has-xhci;
-+ brcm,has-eohci;
-+ #phy-cells = <1>;
-+ status = "disabled";
-+ };
-+
-+ ehci: usb@c300 {
- compatible = "generic-ehci";
- reg = <0xc300 0x100>;
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-+ phys = <&usb_phy PHY_TYPE_USB2>;
- status = "disabled";
- };
-
-- usb@c400 {
-+ ohci: usb@c400 {
- compatible = "generic-ohci";
- reg = <0xc400 0x100>;
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-+ phys = <&usb_phy PHY_TYPE_USB2>;
- status = "disabled";
- };
-
-- usb@d000 {
-+ xhci: usb@d000 {
- compatible = "generic-xhci";
- reg = <0xd000 0x8c8>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-+ phys = <&usb_phy PHY_TYPE_USB3>;
- status = "disabled";
- };
-
-@@ -222,7 +239,7 @@
- #address-cells = <1>;
- #size-cells = <1>;
-
-- power-controller@2800c0 {
-+ pmb: power-controller@2800c0 {
- compatible = "brcm,bcm4908-pmb";
- reg = <0x2800c0 0x40>;
- #power-domain-cells = <1>;
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 15 Feb 2021 19:51:26 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: describe Ethernet controller
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 SoCs have an integrated Ethernet controller.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- .../boot/dts/broadcom/bcm4908/bcm4908.dtsi | 20 +++++++++++++++++++
- 1 file changed, 20 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -112,6 +112,14 @@
- #size-cells = <1>;
- ranges = <0x00 0x00 0x80000000 0x281000>;
-
-+ enet: ethernet@2000 {
-+ compatible = "brcm,bcm4908-enet";
-+ reg = <0x2000 0x1000>;
-+
-+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "rx";
-+ };
-+
- usb_phy: usb-phy@c200 {
- compatible = "brcm,bcm4908-usb-phy";
- reg = <0xc200 0x100>;
-@@ -199,6 +207,18 @@
- phy-mode = "internal";
- phy-handle = <&phy11>;
- };
-+
-+ port@8 {
-+ reg = <8>;
-+ phy-mode = "internal";
-+ ethernet = <&enet>;
-+ brcm,use-bcm-hdr;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
- };
- };
-
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 15 Feb 2021 19:52:58 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-R8000P model has 4 LAN ports and 1 WAN port.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- .../bcm4908/bcm4906-netgear-r8000p.dts | 25 +++++++++++++++++++
- 1 file changed, 25 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-@@ -43,6 +43,31 @@
- status = "okay";
- };
-
-+&ports {
-+ port@0 {
-+ label = "lan4";
-+ };
-+
-+ port@1 {
-+ label = "lan3";
-+ };
-+
-+ port@2 {
-+ label = "lan2";
-+ };
-+
-+ port@3 {
-+ label = "lan1";
-+ };
-+
-+ port@7 {
-+ reg = <7>;
-+ phy-mode = "internal";
-+ phy-handle = <&phy12>;
-+ label = "wan";
-+ };
-+};
-+
- &nandcs {
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 15 Feb 2021 20:05:41 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P
- LEDs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There are a few more GPIO connected LEDs there didn't get described
-initially.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- .../bcm4908/bcm4906-netgear-r8000p.dts | 48 +++++++++++++++++++
- 1 file changed, 48 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-@@ -18,11 +18,59 @@
- leds {
- compatible = "gpio-leds";
-
-+ power-white {
-+ function = LED_FUNCTION_POWER;
-+ color = <LED_COLOR_ID_WHITE>;
-+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ power-amber {
-+ function = LED_FUNCTION_POWER;
-+ color = <LED_COLOR_ID_AMBER>;
-+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
-+ };
-+
- wps {
- function = LED_FUNCTION_WPS;
- color = <LED_COLOR_ID_WHITE>;
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- };
-+
-+ 2ghz {
-+ function = "2ghz";
-+ color = <LED_COLOR_ID_WHITE>;
-+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ 5ghz-1 {
-+ function = "5ghz-1";
-+ color = <LED_COLOR_ID_WHITE>;
-+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ 5ghz-2 {
-+ function = "5ghz-2";
-+ color = <LED_COLOR_ID_WHITE>;
-+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ usb2 {
-+ function = "usb2";
-+ color = <LED_COLOR_ID_WHITE>;
-+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ usb3 {
-+ function = "usb3";
-+ color = <LED_COLOR_ID_WHITE>;
-+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ wifi {
-+ function = "wifi";
-+ color = <LED_COLOR_ID_WHITE>;
-+ gpios = <&gpio0 56 GPIO_ACTIVE_LOW>;
-+ };
- };
- };
-
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 15 Feb 2021 20:30:09 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: describe firmware partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 bootloader supports multiple firmware partitions and has its own
-bindings defined for them.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- .../dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts | 1 +
- .../dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 12 +++++++++++-
- 2 files changed, 12 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
-@@ -135,6 +135,7 @@
- };
-
- partition@100000 {
-+ compatible = "brcm,bcm4908-firmware";
- label = "firmware";
- reg = <0x100000 0x4400000>;
- };
---- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
-@@ -122,7 +122,7 @@
- #size-cells = <0>;
-
- partitions {
-- compatible = "fixed-partitions";
-+ compatible = "brcm,bcm4908-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
-@@ -130,5 +130,15 @@
- label = "cferom";
- reg = <0x0 0x100000>;
- };
-+
-+ partition@100000 {
-+ compatible = "brcm,bcm4908-firmware";
-+ reg = <0x100000 0x5700000>;
-+ };
-+
-+ partition@5800000 {
-+ compatible = "brcm,bcm4908-firmware";
-+ reg = <0x5800000 0x5700000>;
-+ };
- };
- };
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 5 Mar 2021 13:34:03 +0100
-Subject: [PATCH] dt-bindings: arm: bcm: document TP-Link Archer C2300 binding
-
-One more BCM4906 based device.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
-+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
-@@ -21,6 +21,7 @@ properties:
- items:
- - enum:
- - netgear,r8000p
-+ - tplink,archer-c2300-v1
- - const: brcm,bcm4906
- - const: brcm,bcm4908
-
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 5 Mar 2021 13:36:25 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1
-
-Archer C2300 V1 is a home router based on the BCM4906 (2 CPU cores). It
-has 512 MiB of RAM, NAND flash, USB 2.0 and USB 3.0 ports, 4 LAN ports,
-1 WAN port.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- arch/arm64/boot/dts/broadcom/bcm4908/Makefile | 1 +
- .../bcm4906-tplink-archer-c2300-v1.dts | 182 ++++++++++++++++++
- 2 files changed, 183 insertions(+)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
-
---- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
-@@ -1,3 +1,4 @@
- # SPDX-License-Identifier: GPL-2.0
- dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb
-+dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb
- dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
-@@ -0,0 +1,182 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/leds/common.h>
-+
-+#include "bcm4906.dtsi"
-+
-+/ {
-+ compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908";
-+ model = "TP-Link Archer C2300 V1";
-+
-+ memory@0 {
-+ device_type = "memory";
-+ reg = <0x00 0x00 0x00 0x20000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ power-white {
-+ function = LED_FUNCTION_POWER;
-+ color = <LED_COLOR_ID_BLUE>;
-+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ 2ghz {
-+ function = "2ghz";
-+ color = <LED_COLOR_ID_BLUE>;
-+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ 5ghz {
-+ function = "5ghz";
-+ color = <LED_COLOR_ID_BLUE>;
-+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ wan-amber {
-+ function = LED_FUNCTION_WAN;
-+ color = <LED_COLOR_ID_AMBER>;
-+ gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wan-blue {
-+ function = LED_FUNCTION_WAN;
-+ color = <LED_COLOR_ID_BLUE>;
-+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ lan {
-+ function = LED_FUNCTION_LAN;
-+ color = <LED_COLOR_ID_BLUE>;
-+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ wps {
-+ function = LED_FUNCTION_WPS;
-+ color = <LED_COLOR_ID_BLUE>;
-+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ usb-high-white {
-+ function = "usbup";
-+ color = <LED_COLOR_ID_BLUE>;
-+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ usb-low-white {
-+ function = "usbdown";
-+ color = <LED_COLOR_ID_BLUE>;
-+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ brightness {
-+ function = LED_FUNCTION_BACKLIGHT;
-+ color = <LED_COLOR_ID_WHITE>;
-+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ gpio-keys-polled {
-+ compatible = "gpio-keys-polled";
-+ poll-interval = <100>;
-+
-+ brightness {
-+ label = "LEDs";
-+ linux,code = <KEY_BRIGHTNESS_ZERO>;
-+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ wifi {
-+ label = "WiFi";
-+ linux,code = <KEY_RFKILL>;
-+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&usb_phy {
-+ brcm,ioc = <1>;
-+ status = "okay";
-+};
-+
-+&ehci {
-+ status = "okay";
-+};
-+
-+&ohci {
-+ status = "okay";
-+};
-+
-+&xhci {
-+ status = "okay";
-+};
-+
-+&ports {
-+ port@0 {
-+ label = "lan4";
-+ };
-+
-+ port@1 {
-+ label = "lan3";
-+ };
-+
-+ port@2 {
-+ label = "lan2";
-+ };
-+
-+ port@3 {
-+ label = "lan1";
-+ };
-+
-+ port@7 {
-+ reg = <7>;
-+ phy-mode = "internal";
-+ phy-handle = <&phy12>;
-+ label = "wan";
-+ };
-+};
-+
-+&nandcs {
-+ nand-ecc-strength = <4>;
-+ nand-ecc-step-size = <512>;
-+ nand-on-flash-bbt;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ partitions {
-+ compatible = "brcm,bcm4908-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition@0 {
-+ label = "cferom";
-+ reg = <0x0 0x100000>;
-+ };
-+
-+ partition@100000 {
-+ compatible = "brcm,bcm4908-firmware";
-+ reg = <0x100000 0x3900000>;
-+ };
-+
-+ partition@5800000 {
-+ compatible = "brcm,bcm4908-firmware";
-+ reg = <0x3a00000 0x3900000>;
-+ };
-+ };
-+};
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
-@@ -281,7 +281,7 @@
+@@ -280,7 +280,7 @@
gpio0: gpio-controller@500 {
compatible = "brcm,bcm6345-gpio";
reg-names = "dirout", "dat";
--- /dev/null
+From 7e2dc41c745f6d9c571919d98abed2d783fce8fb Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Sun, 14 Mar 2021 22:43:32 +0100
+Subject: [PATCH] net: dsa: bcm_sf2: quick fix for RGMII reg access on BCM4908
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+BCM4908 has only 1 RGMII register and it's used for port 7.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+ drivers/net/dsa/bcm_sf2.c | 30 +++++++++++++++++++++++-------
+ drivers/net/dsa/bcm_sf2_regs.h | 1 +
+ 2 files changed, 24 insertions(+), 7 deletions(-)
+
+--- a/drivers/net/dsa/bcm_sf2.c
++++ b/drivers/net/dsa/bcm_sf2.c
+@@ -543,10 +543,19 @@ static void bcm_sf2_sw_mac_config(struct
+ struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
+ u32 id_mode_dis = 0, port_mode;
+ u32 reg, offset;
++ u32 rgmii_ctrl;
+
+ if (port == core_readl(priv, CORE_IMP0_PRT_ID))
+ return;
+
++ if (priv->type == BCM4908_DEVICE_ID) {
++ if (port != 7)
++ return;
++ rgmii_ctrl = REG_RGMII_11_CNTRL;
++ } else {
++ rgmii_ctrl = REG_RGMII_CNTRL_P(port);
++ }
++
+ if (priv->type == BCM4908_DEVICE_ID ||
+ priv->type == BCM7445_DEVICE_ID)
+ offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
+@@ -574,7 +583,7 @@ static void bcm_sf2_sw_mac_config(struct
+ /* Clear id_mode_dis bit, and the existing port mode, let
+ * RGMII_MODE_EN bet set by mac_link_{up,down}
+ */
+- reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
++ reg = reg_readl(priv, rgmii_ctrl);
+ reg &= ~ID_MODE_DIS;
+ reg &= ~(PORT_MODE_MASK << PORT_MODE_SHIFT);
+ reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
+@@ -589,7 +598,7 @@ static void bcm_sf2_sw_mac_config(struct
+ reg |= RX_PAUSE_EN;
+ }
+
+- reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
++ reg_writel(priv, reg, rgmii_ctrl);
+
+ force_link:
+ /* Force link settings detected from the PHY */
+@@ -615,6 +624,7 @@ static void bcm_sf2_sw_mac_link_set(stru
+ phy_interface_t interface, bool link)
+ {
+ struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
++ u32 rgmii_ctrl;
+ u32 reg;
+
+ if (!phy_interface_mode_is_rgmii(interface) &&
+@@ -622,13 +632,21 @@ static void bcm_sf2_sw_mac_link_set(stru
+ interface != PHY_INTERFACE_MODE_REVMII)
+ return;
+
++ if (priv->type == BCM4908_DEVICE_ID) {
++ if (port != 7)
++ return;
++ rgmii_ctrl = REG_RGMII_11_CNTRL;
++ } else {
++ rgmii_ctrl = REG_RGMII_CNTRL_P(port);
++ }
++
+ /* If the link is down, just disable the interface to conserve power */
+- reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
++ reg = reg_readl(priv, rgmii_ctrl);
+ if (link)
+ reg |= RGMII_MODE_EN;
+ else
+ reg &= ~RGMII_MODE_EN;
+- reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
++ reg_writel(priv, reg, rgmii_ctrl);
+ }
+
+ static void bcm_sf2_sw_mac_link_down(struct dsa_switch *ds, int port,
+@@ -999,9 +1017,7 @@ static const u16 bcm_sf2_4908_reg_offset
+ [REG_PHY_REVISION] = 0x14,
+ [REG_SPHY_CNTRL] = 0x24,
+ [REG_CROSSBAR] = 0xc8,
+- [REG_RGMII_0_CNTRL] = 0xe0,
+- [REG_RGMII_1_CNTRL] = 0xec,
+- [REG_RGMII_2_CNTRL] = 0xf8,
++ [REG_RGMII_11_CNTRL] = 0x014c,
+ [REG_LED_0_CNTRL] = 0x40,
+ [REG_LED_1_CNTRL] = 0x4c,
+ [REG_LED_2_CNTRL] = 0x58,
+--- a/drivers/net/dsa/bcm_sf2_regs.h
++++ b/drivers/net/dsa/bcm_sf2_regs.h
+@@ -21,6 +21,7 @@ enum bcm_sf2_reg_offs {
+ REG_RGMII_0_CNTRL,
+ REG_RGMII_1_CNTRL,
+ REG_RGMII_2_CNTRL,
++ REG_RGMII_11_CNTRL,
+ REG_LED_0_CNTRL,
+ REG_LED_1_CNTRL,
+ REG_LED_2_CNTRL,
projects / openwrt / staging / 981213.git / commitdiff