uqmi: add support for IPv4 autoconf from QMI
authorFilip Moc <lede@moc6.cz>
Wed, 18 Nov 2020 19:36:12 +0000 (20:36 +0100)
committerDaniel Golle <daniel@makrotopia.org>
Sun, 22 Nov 2020 21:13:39 +0000 (21:13 +0000)
There already was an option for autoconfiguring IPv4 from QMI but this
was removed by commit 3b9b963e6e08 ("uqmi: always use DHCP for IPv4").

DHCP does not work on MR400 LTE module (in TL-MR6400 v4) so let's readd
support for IPv4 autoconf from QMI but this time allow to configure this
for IPv4 and IPv6 independently and keep DHCP default on IPv4.

Signed-off-by: Filip Moc <lede@moc6.cz>
package/network/utils/uqmi/Makefile
package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh

index dee4bd051e9fd58062c82684f63c664124976ef7..4a15a15c19de07a32380b8edeea6cbfeb41641bd 100644 (file)
@@ -1,7 +1,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=uqmi
-PKG_RELEASE:=7
+PKG_RELEASE:=8
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/uqmi.git
index 31c265614210d00dfda8c591f94d5100fd7a7c78..a77523cd407feb6bd22f4f1993b9e61961bbb314 100755 (executable)
@@ -19,6 +19,7 @@ proto_qmi_init_config() {
        proto_config_add_string modes
        proto_config_add_string pdptype
        proto_config_add_int profile
+       proto_config_add_boolean dhcp
        proto_config_add_boolean dhcpv6
        proto_config_add_boolean autoconnect
        proto_config_add_int plmn
@@ -31,13 +32,13 @@ proto_qmi_setup() {
        local interface="$1"
        local dataformat connstat
        local device apn auth username password pincode delay modes pdptype
-       local profile dhcpv6 autoconnect plmn timeout mtu $PROTO_DEFAULT_OPTIONS
+       local profile dhcp dhcpv6 autoconnect plmn timeout mtu $PROTO_DEFAULT_OPTIONS
        local ip4table ip6table
        local cid_4 pdh_4 cid_6 pdh_6
        local ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6
 
        json_get_vars device apn auth username password pincode delay modes
-       json_get_vars pdptype profile dhcpv6 autoconnect plmn ip4table
+       json_get_vars pdptype profile dhcp dhcpv6 autoconnect plmn ip4table
        json_get_vars ip6table timeout mtu $PROTO_DEFAULT_OPTIONS
 
        [ "$timeout" = "" ] && timeout="10"
@@ -353,15 +354,41 @@ proto_qmi_setup() {
        }
 
        [ -n "$pdh_4" ] && {
-               json_init
-               json_add_string name "${interface}_4"
-               json_add_string ifname "@$interface"
-               json_add_string proto "dhcp"
-               [ -n "$ip4table" ] && json_add_string ip4table "$ip4table"
-               proto_add_dynamic_defaults
-               [ -n "$zone" ] && json_add_string zone "$zone"
-               json_close_object
-               ubus call network add_dynamic "$(json_dump)"
+               if [ "$dhcp" = 0 ]; then
+                       json_load "$(uqmi -s -d $device --set-client-id wds,$cid_4 --get-current-settings)"
+                       json_select ipv4
+                       json_get_var ip_4 ip
+                       json_get_var gateway_4 gateway
+                       json_get_var dns1_4 dns1
+                       json_get_var dns2_4 dns2
+                       json_get_var subnet_4 subnet
+
+                       proto_init_update "$ifname" 1
+                       proto_set_keep 1
+                       proto_add_ipv4_address "$ip_4" "$subnet_4"
+                       proto_add_ipv4_route "$gateway_4" "128"
+                       [ "$defaultroute" = 0 ] || proto_add_ipv4_route "0.0.0.0" 0 "$gateway_4"
+                       [ "$peerdns" = 0 ] || {
+                               proto_add_dns_server "$dns1_4"
+                               proto_add_dns_server "$dns2_4"
+                       }
+                       [ -n "$zone" ] && {
+                               proto_add_data
+                               json_add_string zone "$zone"
+                               proto_close_data
+                       }
+                       proto_send_update "$interface"
+               else
+                       json_init
+                       json_add_string name "${interface}_4"
+                       json_add_string ifname "@$interface"
+                       json_add_string proto "dhcp"
+                       [ -n "$ip4table" ] && json_add_string ip4table "$ip4table"
+                       proto_add_dynamic_defaults
+                       [ -n "$zone" ] && json_add_string zone "$zone"
+                       json_close_object
+                       ubus call network add_dynamic "$(json_dump)"
+               fi
        }
 }