ramips: Apply pinctrl DTS changes to TL-WPA8631P

Applies changes from 7774b86019 to new device committed later. Fix some
whitespace in the DTS. Use standard model name format in DTS.

Fixes: 6c743c3006f9 ("ramips: Add support for TP-Link TL-WPA8631P v3")
Signed-off-by: Joe Mullally <jwmullally@gmail.com>
Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com>

diff --git a/target/linux/ramips/dts/mt7621_tplink_tl-wpa8631p-v3.dts b/target/linux/ramips/dts/mt7621_tplink_tl-wpa8631p-v3.dts
index 7012c315c1f0be7bd17e4f398549b33f93f243e5..0d466f1e6610cf6313272fd2af553409df9926e2 100644 (file)
--- a/target/linux/ramips/dts/mt7621_tplink_tl-wpa8631p-v3.dts
+++ b/target/linux/ramips/dts/mt7621_tplink_tl-wpa8631p-v3.dts
@@ -7,7 +7,7 @@
 
 / {
        compatible = "tplink,tl-wpa8631p-v3", "mediatek,mt7621-soc";
-       model = "TP-Link WPA8631P v3";
+       model = "TP-Link TL-WPA8631P v3";
 
        aliases {
                label-mac-device = &gmac0;
@@ -75,15 +75,15 @@
                };
        };
 
-        gpio-export {
-                compatible = "gpio-export";
+       gpio-export {
+               compatible = "gpio-export";
 
-                led_control {
-                        gpio-export,name = "tp-link:led:control";
-                        gpio-export,output = <0>;
-                        gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
-                };
-        };
+               led_control {
+                       gpio-export,name = "tp-link:led:control";
+                       gpio-export,output = <0>;
+                       gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+               };
+       };
 };
 
 &spi0 {
@@ -160,6 +160,10 @@
        };
 };
 
+&ethernet {
+       pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
+};
+
 &gmac0 {
        nvmem-cells = <&macaddr_config_2008>;
        nvmem-cell-names = "mac-address";