Refresh kernel patches using make target/linux/refresh.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
-@@ -407,6 +407,29 @@ int qcom_scm_set_remote_state(u32 state,
+@@ -410,6 +410,29 @@ int qcom_scm_set_remote_state(u32 state,
}
- EXPORT_SYMBOL(qcom_scm_set_remote_state);
+ EXPORT_SYMBOL_GPL(qcom_scm_set_remote_state);
+static int qcom_scm_disable_sdi(void)
+{
static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
{
struct qcom_scm_desc desc = {
-@@ -1411,6 +1434,13 @@ static int qcom_scm_probe(struct platfor
+@@ -1467,6 +1490,13 @@ static int qcom_scm_probe(struct platfor
__get_convention();
* will cause the boot stages to enter download mode, unless
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
-@@ -77,6 +77,7 @@ extern int scm_legacy_call(struct device
+@@ -80,6 +80,7 @@ extern int scm_legacy_call(struct device
#define QCOM_SCM_SVC_BOOT 0x01
#define QCOM_SCM_BOOT_SET_ADDR 0x01
#define QCOM_SCM_BOOT_TERMINATE_PC 0x02
--- a/drivers/clk/qcom/gcc-ipq4019.c
+++ b/drivers/clk/qcom/gcc-ipq4019.c
-@@ -1243,6 +1243,29 @@ static const struct clk_fepll_vco gcc_fe
+@@ -120,6 +120,29 @@ static const struct clk_fepll_vco gcc_fe
.reg = 0x2f020,
};
/*
* Round rate function for APSS CPU PLL Clock divider.
* It looks up the frequency table and returns the next higher frequency
-@@ -1255,7 +1278,7 @@ static long clk_cpu_div_round_rate(struc
+@@ -132,7 +155,7 @@ static long clk_cpu_div_round_rate(struc
struct clk_hw *p_hw;
const struct freq_tbl *f;
if (!f)
return -EINVAL;
-@@ -1277,7 +1300,7 @@ static int clk_cpu_div_set_rate(struct c
+@@ -154,7 +177,7 @@ static int clk_cpu_div_set_rate(struct c
const struct freq_tbl *f;
u32 mask;
if (!f)
return -EINVAL;
-@@ -1304,6 +1327,7 @@ static unsigned long
+@@ -181,6 +204,7 @@ static unsigned long
clk_cpu_div_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct clk_fepll *pll = to_clk_fepll(hw);
u32 cdiv, pre_div;
u64 rate;
-@@ -1324,7 +1348,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *h
+@@ -201,7 +225,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *h
rate = clk_fepll_vco_calc_rate(pll, parent_rate) * 2;
do_div(rate, pre_div);
drivers/mtd/mtdcore.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
-index 5887feb347a4..6872477a5129 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
-@@ -900,7 +900,7 @@ static struct nvmem_device *mtd_otp_nvmem_register(struct mtd_info *mtd,
+@@ -933,7 +933,7 @@ static struct nvmem_device *mtd_otp_nvme
config.name = compatible;
config.id = NVMEM_DEVID_AUTO;
config.owner = THIS_MODULE;
config.type = NVMEM_TYPE_OTP;
config.root_only = true;
config.ignore_wp = true;
---
-2.43.0
-
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
-@@ -2451,7 +2451,7 @@ MODULE_DEVICE_TABLE(of, sdhci_msm_dt_mat
+@@ -2320,7 +2320,7 @@ MODULE_DEVICE_TABLE(of, sdhci_msm_dt_mat
static const struct sdhci_ops sdhci_msm_ops = {
.reset = sdhci_and_cqhci_reset,
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
-@@ -1751,49 +1751,49 @@ static unsigned int sdhci_msm_get_min_cl
+@@ -1755,49 +1755,49 @@ static unsigned int sdhci_msm_get_min_cl
return SDHCI_MSM_MIN_CLOCK;
}
}
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
-@@ -312,6 +312,17 @@ static int qcom_scm_set_boot_addr(void *
+@@ -315,6 +315,17 @@ static int qcom_scm_set_boot_addr(void *
desc.args[0] = flags;
desc.args[1] = virt_to_phys(entry);
--- a/MAINTAINERS
+++ b/MAINTAINERS
-@@ -17075,6 +17075,13 @@ L: netdev@vger.kernel.org
+@@ -17708,6 +17708,13 @@ L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/qualcomm/emac/
R: Bhupesh Sharma <bhupesh.sharma@linaro.org>
--- a/drivers/net/ethernet/qualcomm/Kconfig
+++ b/drivers/net/ethernet/qualcomm/Kconfig
-@@ -60,6 +60,17 @@ config QCOM_EMAC
+@@ -61,6 +61,17 @@ config QCOM_EMAC
low power, Receive-Side Scaling (RSS), and IEEE 1588-2008
Precision Clock Synchronization Protocol.
--- a/MAINTAINERS
+++ b/MAINTAINERS
-@@ -17081,6 +17081,7 @@ L: netdev@vger.kernel.org
+@@ -17714,6 +17714,7 @@ L: netdev@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/net/qcom,ipq4019-ess-edma.yaml
F: drivers/net/ethernet/qualcomm/ipqess/
+#endif
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
-@@ -4588,6 +4588,9 @@ enum skb_ext_id {
+@@ -4627,6 +4627,9 @@ enum skb_ext_id {
#if IS_ENABLED(CONFIG_MCTP_FLOWS)
SKB_EXT_MCTP,
#endif
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
-@@ -55,6 +55,7 @@ struct phylink_link_state;
+@@ -56,6 +56,7 @@ struct phylink_link_state;
#define DSA_TAG_PROTO_RTL8_4T_VALUE 25
#define DSA_TAG_PROTO_RZN1_A5PSW_VALUE 26
#define DSA_TAG_PROTO_LAN937X_VALUE 27
enum dsa_tag_protocol {
DSA_TAG_PROTO_NONE = DSA_TAG_PROTO_NONE_VALUE,
-@@ -85,6 +86,7 @@ enum dsa_tag_protocol {
+@@ -86,6 +87,7 @@ enum dsa_tag_protocol {
DSA_TAG_PROTO_RTL8_4T = DSA_TAG_PROTO_RTL8_4T_VALUE,
DSA_TAG_PROTO_RZN1_A5PSW = DSA_TAG_PROTO_RZN1_A5PSW_VALUE,
DSA_TAG_PROTO_LAN937X = DSA_TAG_PROTO_LAN937X_VALUE,
struct dsa_switch;
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
-@@ -62,8 +62,12 @@
+@@ -63,8 +63,12 @@
#include <linux/mpls.h>
#include <linux/kcov.h>
#include <linux/if.h>
#include <net/dst.h>
#include <net/sock.h>
#include <net/checksum.h>
-@@ -4517,6 +4521,9 @@ static const u8 skb_ext_type_len[] = {
+@@ -4812,6 +4816,9 @@ static const u8 skb_ext_type_len[] = {
#if IS_ENABLED(CONFIG_MCTP_FLOWS)
[SKB_EXT_MCTP] = SKB_EXT_CHUNKSIZEOF(struct mctp_flow),
#endif
static __always_inline unsigned int skb_ext_total_length(void)
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
-@@ -113,6 +113,15 @@ config NET_DSA_TAG_OCELOT_8021Q
+@@ -119,6 +119,15 @@ config NET_DSA_TAG_OCELOT_8021Q
this mode, less TCAM resources (VCAP IS1, IS2, ES0) are available for
use with tc-flower.
help
--- a/net/dsa/Makefile
+++ b/net/dsa/Makefile
-@@ -22,6 +22,7 @@ obj-$(CONFIG_NET_DSA_TAG_LAN9303) += tag
- obj-$(CONFIG_NET_DSA_TAG_MTK) += tag_mtk.o
+@@ -31,6 +31,7 @@ obj-$(CONFIG_NET_DSA_TAG_MTK) += tag_mtk
+ obj-$(CONFIG_NET_DSA_TAG_NONE) += tag_none.o
obj-$(CONFIG_NET_DSA_TAG_OCELOT) += tag_ocelot.o
obj-$(CONFIG_NET_DSA_TAG_OCELOT_8021Q) += tag_ocelot_8021q.o
+obj-$(CONFIG_NET_DSA_TAG_OOB) += tag_oob.o
--- a/drivers/net/ethernet/qualcomm/Kconfig
+++ b/drivers/net/ethernet/qualcomm/Kconfig
-@@ -64,6 +64,7 @@ config QCOM_IPQ4019_ESS_EDMA
+@@ -65,6 +65,7 @@ config QCOM_IPQ4019_ESS_EDMA
tristate "Qualcomm Atheros IPQ4019 ESS EDMA support"
depends on (OF && ARCH_QCOM) || COMPILE_TEST
select PHYLINK
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
-@@ -594,6 +594,54 @@
+@@ -596,6 +596,54 @@
status = "disabled";
};
--- a/drivers/net/dsa/qca/Kconfig
+++ b/drivers/net/dsa/qca/Kconfig
-@@ -23,3 +23,11 @@ config NET_DSA_QCA8K_LEDS_SUPPORT
+@@ -24,3 +24,11 @@ config NET_DSA_QCA8K_LEDS_SUPPORT
help
This enabled support for LEDs present on the Qualcomm Atheros
QCA8K Ethernet switch chips.
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
-@@ -594,6 +594,82 @@
+@@ -596,6 +596,82 @@
status = "disabled";
};
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
-@@ -725,24 +725,33 @@
+@@ -727,24 +727,33 @@
reg = <0x90000 0x64>;
status = "disabled";
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
-@@ -752,6 +752,10 @@
+@@ -754,6 +754,10 @@
ethphy4: ethernet-phy@4 {
reg = <4>;
};
Subject: SoC: add qualcomm syscon
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
-@@ -248,4 +248,11 @@ config QCOM_ICC_BWMON
- the fixed bandwidth votes from cpufreq (CPU nodes) thus achieve high
- memory throughput even with lower CPU frequencies.
+@@ -291,4 +291,11 @@ config QCOM_INLINE_CRYPTO_ENGINE
+ tristate
+ select QCOM_SCM
+config QCOM_TCSR
+ tristate "QCOM Top Control and Status Registers"
endmenu
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
-@@ -29,3 +29,4 @@ obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o
+@@ -32,3 +32,4 @@ obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) +=
obj-$(CONFIG_QCOM_ICC_BWMON) += icc-bwmon.o
qcom_ice-objs += ice.o
obj-$(CONFIG_QCOM_INLINE_CRYPTO_ENGINE) += qcom_ice.o
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
-@@ -1466,7 +1466,8 @@ static int qcom_scm_probe(struct platfor
+@@ -1522,7 +1522,8 @@ static int qcom_scm_probe(struct platfor
static void qcom_scm_shutdown(struct platform_device *pdev)
{
/* Clean shutdown, disable download mode to allow normal restart */
projects / openwrt / staging / nbd.git / commitdiff