make adm6996 switches work on tnetd7200 and tnetd7300
authorFlorian Fainelli <florian@openwrt.org>
Sun, 22 Aug 2010 17:09:11 +0000 (17:09 +0000)
committerFlorian Fainelli <florian@openwrt.org>
Sun, 22 Aug 2010 17:09:11 +0000 (17:09 +0000)
SVN-Revision: 22771

target/linux/ar7/config-2.6.32
target/linux/ar7/patches-2.6.32/972-cpmac_multi_probe.patch [new file with mode: 0644]

index 3e7fb4edde54ecc49d9e277a5d2cfc78b2225b0a..208c0baf0a4eba8ea05edab80d73565e47b2d3a2 100644 (file)
@@ -60,6 +60,7 @@ CONFIG_DECOMPRESS_LZMA=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_EARLY_PRINTK=y
+CONFIG_FIXED_PHY=y
 # CONFIG_FSNOTIFY is not set
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
diff --git a/target/linux/ar7/patches-2.6.32/972-cpmac_multi_probe.patch b/target/linux/ar7/patches-2.6.32/972-cpmac_multi_probe.patch
new file mode 100644 (file)
index 0000000..44933d0
--- /dev/null
@@ -0,0 +1,67 @@
+--- a/drivers/net/cpmac.c
++++ b/drivers/net/cpmac.c
+@@ -33,6 +33,7 @@
+ #include <linux/skbuff.h>
+ #include <linux/mii.h>
+ #include <linux/phy.h>
++#include <linux/phy_fixed.h>
+ #include <linux/platform_device.h>
+ #include <linux/dma-mapping.h>
+ #include <asm/gpio.h>
+@@ -217,6 +218,12 @@ static void cpmac_hw_stop(struct net_dev
+ static int cpmac_stop(struct net_device *dev);
+ static int cpmac_open(struct net_device *dev);
++static struct fixed_phy_status fixed_phy_status = {
++      .link = 1,
++      .speed = 100,
++      .duplex = 1,
++};
++
+ static void cpmac_dump_regs(struct net_device *dev)
+ {
+       int i;
+@@ -1122,12 +1129,39 @@ static int __devinit cpmac_probe(struct
+               strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE);
+               break;
+       }
+-      
+-      if (phy_id == PHY_MAX_ADDR) {
+-              dev_err(&pdev->dev, "no PHY present\n");
+-              return -ENODEV;
++
++      if (phy_id < PHY_MAX_ADDR)
++              goto dev_alloc;
++
++      dev_info(&pdev->dev, "trying external MII\n");
++      /* Now disable EPHY and enable MII */
++      ar7_device_disable(AR7_RESET_BIT_EPHY);
++      *(unsigned long*) ioremap(0x08611A08, 4) |= 0x00000001;
++
++      for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
++              if (!(pdata->phy_mask & (1 << phy_id)))
++                      continue;
++              if (!cpmac_mii->phy_map[phy_id])
++                      continue;
++              strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE);
++              break;
++      }
++
++      if (phy_id < PHY_MAX_ADDR)
++              goto dev_alloc;
++
++      /* This still does not work, so now we register a fixed phy */
++      dev_info(&pdev->dev, "using fixed PHY\n");
++      rc = fixed_phy_add(PHY_POLL, pdev->id, &fixed_phy_status);
++      if (rc && rc != -ENODEV) {
++              dev_err(&pdev->dev, "unable to register fixed PHY\n");
++              return rc;
+       }
++      strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
++      phy_id = pdev->id;
++
++dev_alloc:
+       dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES);
+       if (!dev) {