apcupsd: add driver modbus-usb

Signed-off-by: Othmar Truniger <github@truniger.ch>

diff --git a/net/apcupsd/Makefile b/net/apcupsd/Makefile
index 65b318e44d1a73944977e430bfaf457d181940c0..fd8236d8ce7fbf8fd043359b4450935f680a8ff1 100644 (file)
--- a/net/apcupsd/Makefile
+++ b/net/apcupsd/Makefile
@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=apcupsd
 PKG_VERSION:=3.14.13
-PKG_RELEASE:=3
+PKG_RELEASE:=4
 
 PKG_MAINTAINER:=Othmar Truniger <github@truniger.ch>
 PKG_LICENSE:=GPL-2.0
@@ -26,7 +26,7 @@ include $(INCLUDE_DIR)/package.mk
 define Package/apcupsd
   SECTION:=net
   CATEGORY:=Network
-  DEPENDS:=+libpthread
+  DEPENDS:=+libpthread +libusb-compat
   TITLE:=UPS control software
   URL:=http://www.apcupsd.org/
 endef
@@ -46,6 +46,7 @@ define Build/Configure
                --sysconfdir=/etc/apcupsd \
                --enable-cgi \
                --enable-usb \
+               --enable-modbus-usb \
                --without-x \
        )
 endef
@@ -78,13 +79,11 @@ endef
 
 define Package/apcupsd-cgi/install
        $(INSTALL_DIR) $(1)/www/cgi-bin/apcupsd
-       $(INSTALL_BIN) $(PKG_INSTALL_DIR)/etc/apcupsd/multimon.cgi $(1)/www/cgi-bin/apcupsd
-       $(INSTALL_BIN) $(PKG_INSTALL_DIR)/etc/apcupsd/upsfstats.cgi $(1)/www/cgi-bin/apcupsd
-       $(INSTALL_BIN) $(PKG_INSTALL_DIR)/etc/apcupsd/upsimage.cgi $(1)/www/cgi-bin/apcupsd
-       $(INSTALL_BIN) $(PKG_INSTALL_DIR)/etc/apcupsd/upsstats.cgi $(1)/www/cgi-bin/apcupsd
+       $(INSTALL_BIN) $(PKG_INSTALL_DIR)/etc/apcupsd/*.cgi $(1)/www/cgi-bin/apcupsd
        $(INSTALL_DIR) $(1)/etc/apcupsd
        $(INSTALL_CONF) ./files/apcupsd.css $(1)/etc/apcupsd/
        $(INSTALL_CONF) ./files/hosts.conf $(1)/etc/apcupsd/
+       $(INSTALL_CONF) ./files/multimon.conf $(1)/etc/apcupsd/
 endef
 
 define Package/apcupsd/conffiles
@@ -100,6 +99,7 @@ endef
 define Package/apcupsd-cgi/conffiles
 /etc/apcupsd/apcupsd.css
 /etc/apcupsd/hosts.conf
+/etc/apcupsd/multimon.conf
 endef
 
 $(eval $(call BuildPackage,apcupsd))

diff --git a/net/apcupsd/files/multimon.conf b/net/apcupsd/files/multimon.conf
new file mode 100644 (file)
index 0000000..4cdf9b0
--- /dev/null
+++ b/net/apcupsd/files/multimon.conf
@@ -0,0 +1,63 @@
+# Sample multimon configuration file
+#
+# This file is not required.  Without it, multimon will use the default
+# field layout.
+#
+# Temperature selection
+# 
+# Pick "TEMPC" for Celsius or "TEMPF" for Fahrenheit.  This will override
+# the --enable-celsius setting from the compile.  UPSTEMP (below) will 
+# use this setting by default.
+
+TEMPC
+
+# Format:
+# FIELD <variable> "<field name>" "<field suffix>"
+#
+# <variable> is either a word from the UPS protocol like battchg (see the
+# table in src/cgi/upsfetch.c) or a special word in uppercase.  
+#
+# Special words are:
+# MODEL    - Show the model name for this system in cyan
+#
+# STATUS   - Parse the status for this system using the appropriate color
+#
+# UPSTEMP and AMBTEMP use the default scale.  This is set to C if you use
+# --enable-celsius at compile time *or* if you use "TEMPC" above.
+#
+# UPSTEMP  - Show the UPS temperature in the default scale (suffix ignored)
+# AMBTEMP  - Show the ambient temperature in the default scale (suffix ignored)
+#
+# UPSTEMPC - Show the UPS temperature in degrees C (suffix ignored)
+# UPSTEMPF - Show the UPS temperature in degrees F (suffix ignored)
+# AMBTEMPC - Show the ambient temperature in degrees C (suffix ignored)
+# AMBTEMPF - Show the ambient temperature in degrees F (suffix ignored)
+# 
+# They're called "special" since they actually understand the content
+# being printed and do other things based on what's in there.
+# 
+# <field name> is what you'd like this column to be called on the page.
+# Remember that this is HTML, so you can actually embed markup in here.
+# This means you can even include images here.  You can include quotes
+# (and backslashes!) in the string by escaping them with a backslash (\).
+# 
+# <field suffix> is typically something like % or VAC.  It's useful if
+# you want to convey the units that apply to a value.
+#
+# Example config
+
+FIELD SYSTEM "System" ""
+FIELD MODEL "Model" ""
+FIELD STATUS "Status" ""
+FIELD battpct "Battery Chg" "%"
+FIELD utility "Utility" "VAC"
+FIELD loadpct "UPS Load" "%"
+FIELD UPSTEMP "UPS Temp" ""
+FIELD runtime "Batt. Run Time" "min."
+FIELD DATA   "Data" "All data"
+
+# These are only useful if you have a Smart-UPS model with the Measure-UPS II
+# measurement card.  No other models presently support these features.
+# 
+# FIELD AMBTEMP "Ambient Temp" ""
+# FIELD HUMIDITY "Ambient Humidity" "%"

diff --git a/net/apcupsd/patches/010-fix-usb.patch b/net/apcupsd/patches/010-fix-usb.patch
new file mode 100644 (file)
index 0000000..b313bb2
--- /dev/null
+++ b/net/apcupsd/patches/010-fix-usb.patch
@@ -0,0 +1,8 @@
+--- a/include/libusb.h.in.orig 2015-02-21 18:53:51.023682068 +0100
++++ a/include/libusb.h.in      2015-02-21 18:54:14.722788757 +0100
+@@ -6,4 +6,4 @@
+  * path at configure time and various apcupsd bits include this\r
+  * when they need libusb's usb.h.\r
+  */\r
+-#include "@LIBUSBH@"\r
++#include "usb.h"\r