Replace the mtd-cal-data phandle by an nvmem-cell reference to the art
partition for the 2.4GHz ath9k radio.
Add the PCIe node for the ath10k radio to the devicetree, and refer to
the art partition for the calibration data using nvmem-cells.
Use mac-address-increment to ensure the MAC address is set correctly,
and remove the device from the caldata extraction and patching script.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
+
+ wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0 0 0 0 0>;
+
+ mac-address-increment = <1>;
+
+ nvmem-cells = <&macaddr_info_8>, <&calibration_ath10k>;
+ nvmem-cell-names = "mac-address", "calibration";
+ };
label = "art";
reg = <0xff0000 0x010000>;
read-only;
label = "art";
reg = <0xff0000 0x010000>;
read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ calibration_ath9k: calibration@1000 {
+ reg = <0x1000 0x440>;
+ };
+
+ calibration_ath10k: calibration@5000 {
+ reg = <0x5000 0x2f20>;
+ };
- mtd-cal-data = <&art 0x1000>;
- nvmem-cells = <&macaddr_info_8>;
- nvmem-cell-names = "mac-address";
+ nvmem-cells = <&macaddr_info_8>, <&calibration_ath9k>;
+ nvmem-cell-names = "mac-address", "calibration";
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
- tplink,eap225-wall-v2)
- caldata_extract "art" 0x5000 0x2f20
- ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
- ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
- /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
- ;;
xiaomi,aiot-ac2350)
caldata_extract "art" 0x5000 0x2f20
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
xiaomi,aiot-ac2350)
caldata_extract "art" 0x5000 0x2f20
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \