X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fbase-files%2Fetc%2Fboard.d%2F02_network;h=baf619f7a1ab07cacc63d6f6a4e62852964f1851;hb=ab90f15c89da6aeadf8b95554fcd8ab8e3f433d0;hp=2af5c45d8af458d71c02b4d66f3bda27f30c8d53;hpb=377eac0ceb7145be6e294cbd077b9e562776fd50;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 2af5c45d8a..baf619f7a1 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -32,6 +32,11 @@ ramips_setup_interfaces()
 	local board="$1"
 
 	case $board in
+	11acnas|\
+	w2914nsv2)
+		ucidef_add_switch "switch0" \
+			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0"
+		;;
 	3g150b|\
 	3g300m|\
 	a5-v11|\
@@ -48,6 +53,8 @@ ramips_setup_interfaces()
 	microwrt|\
 	mpr-a2|\
 	ncs601w|\
+	omega2 | \
+	omega2p | \
 	timecloud|\
 	w150m|\
 	widora-neo|\
@@ -203,6 +210,11 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0"
 		;;
+	kn_rc|\
+	kn_rf)
+		ucidef_add_switch "switch" \
+			"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6@eth0"
+		;;
 	kng_rc)
 		ucidef_add_switch "switch1" \
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "7t@eth0"
@@ -212,6 +224,11 @@ ramips_setup_interfaces()
 	wl-330n)
 		ucidef_set_interface_lan "eth0.1"
 		;;
+	mr200)
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0"
+		ucidef_set_interface_wan "usb0"
+		;;
 	mzk-dp150n|\
 	vocore)
 		ucidef_add_switch "switch0" \
@@ -234,6 +251,10 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
 		;;
+	vocore2)
+		ucidef_add_switch "switch0" \
+			"0:lan" "2:lan" "6t@eth0"
+		;;
 	f5d8235-v1|\
 	tew-714tru|\
 	v11st-fe|\
@@ -241,10 +262,6 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
 		;;
-	w2914nsv2)
-		ucidef_add_switch "switch0" \
-			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0"
-		;;
 	wcr-150gn)
 		ucidef_add_switch "switch0" \
 			"0:lan" "6t@eth0"
@@ -351,6 +368,11 @@ ramips_setup_macs()
 		lan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$lan_mac" 2)
 		;;
+	omega2|\
+	omega2p)
+		wan_mac=$(mtd_get_mac_binary factory 4)
+		lan_mac=$(mtd_get_mac_binary factory 46)
+		;;
 	oy-0001)
 		lan_mac=$(mtd_get_mac_binary factory 40)
 		wan_mac=$(mtd_get_mac_binary factory 46)