X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fbase-files%2Fetc%2Fboard.d%2F02_network;h=5ad9a13b86d53f3d570cf2eb66a25c493424567f;hb=dce5c4f5c8629af13bdb7cb5803a349cb8305d70;hp=6807eede319d364bed11e1dc76ae8d49447c5b33;hpb=9a4935687d6d79e0eeae37204794fc68e17c8b68;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 6807eede31..5ad9a13b86 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -49,9 +49,11 @@ ramips_setup_interfaces()
 	microwrt|\
 	mpr-a2|\
 	ncs601w|\
+	timecloud|\
 	w150m|\
 	widora-neo|\
 	wnce2001|\
+	zbt-cpe102|\
 	zte-q7)
 		ucidef_add_switch "switch0"
 		ucidef_add_switch_attr "switch0" "enable" "false"
@@ -71,15 +73,18 @@ ramips_setup_interfaces()
 	dir-615-h1|\
 	firewrt|\
 	hlk-rm04|\
+	mac1200rv2|\
 	miwifi-mini|\
 	miwifi-nano|\
 	mt7621|\
 	mt7628|\
 	mzk-750dhp|\
 	mzk-w300nh2|\
+	nixcore|\
 	oy-0001|\
 	pbr-m1|\
 	psg1208|\
+	psg1218|\
 	sap-g3200u3|\
 	sk-wb8|\
 	wf-2881|\
@@ -91,9 +96,12 @@ ramips_setup_interfaces()
 	wsr-600|\
 	wt1520|\
 	y1|\
+	youku-yk1|\
+	zbt-ape522ii|\
+	zbt-we826|\
 	zbt-wg2626|\
 	zbt-wg3526|\
-	youku-yk1)
+	zbt-wr8305rt)
 		ucidef_add_switch "switch0" \
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
 		;;
@@ -113,6 +121,8 @@ ramips_setup_interfaces()
 	atp-52b|\
 	awm002-evb|\
 	awm003-evb|\
+	c20i|\
+	c50|\
 	dir-645|\
 	dir-860l-b1|\
 	f5d8235-v1|\
@@ -121,10 +131,10 @@ ramips_setup_interfaces()
 	gl-mt300n|\
 	gl-mt750|\
 	hg255d|\
-	mzk-wdpr|\
 	jhr-n805r|\
 	jhr-n825r|\
 	jhr-n926r|\
+	mzk-wdpr|\
 	rt-n14u|\
 	ubnt-erx|\
 	ur-326n4g|\
@@ -164,11 +174,14 @@ ramips_setup_interfaces()
 		;;
 	cs-qr10|\
 	d105|\
+	dch-m225|\
 	hpm|\
 	mzk-ex300np|\
 	mzk-ex750np|\
 	na930|\
+	pbr-d1|\
 	wli-tx4-ag300n|\
+	wmr-300|\
 	wrh-300cr)
 		ucidef_set_interface_lan "eth0"
 		;;
@@ -188,8 +201,7 @@ ramips_setup_interfaces()
 		;;
 	mlwg2|\
 	wizard8800|\
-	wl-330n|\
-	wmr-300)
+	wl-330n)
 		ucidef_set_interface_lan "eth0.1"
 		;;
 	mzk-dp150n|\
@@ -197,6 +209,13 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0:lan" "4:lan" "6t@eth0"
 		;;
+	newifi-d1)
+		ucidef_set_interface_lan_wan "eth0.1" "eth0.2"
+		ucidef_add_switch "switch0" \
+			"0:lan" "1:lan" "2:lan" "3:lan" "5:wan" "6t@eth0" "7t@eth0"
+		ucidef_add_switch "switch1" \
+			"4:lan" "6t@eth0" "7t@eth0"
+		;;
 	rt-n56u)
 		ucidef_add_switch "switch0" \
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
@@ -206,6 +225,7 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
 		;;
+	tew-714tru|\
 	v11st-fe|\
 	wzr-agl300nh)
 		ucidef_add_switch "switch0" \
@@ -223,11 +243,6 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "0:wan" "6@eth0"
 		;;
-	zbt-we826|\
-	zbt-wr8305rt)
-		ucidef_add_switch "switch0" \
-			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
-		;;
 	*)
 		RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"`
 		if [ -n "${RT3X5X}" ]; then
@@ -280,10 +295,17 @@ ramips_setup_macs()
 		wan_mac=$(mtd_get_mac_binary devdata 7)
 		;;
 	cy-swr1100|\
+	dch-m225)
+		lan_mac=$(mtd_get_mac_ascii factory lanmac)
+		;;
 	dir-645)
 		lan_mac=$(mtd_get_mac_ascii nvram lanmac)
 		wan_mac=$(mtd_get_mac_ascii nvram wanmac)
 		;;
+	dir-860l-b1)
+		lan_mac=$(mtd_get_mac_ascii factory lanmac)
+		wan_mac=$(mtd_get_mac_ascii factory wanmac)
+		;;
 	e1700)
 		wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
 		;;
@@ -297,6 +319,10 @@ ramips_setup_macs()
 		wan_mac=$(mtd_get_mac_binary factory 4)
 		lan_mac=$(mtd_get_mac_binary factory 46)
 		;;
+	mac1200rv2)
+		lan_mac=$(mtd_get_mac_binary factory_info 13)
+		wan_mac=$(macaddr_add "$lan_mac" 1)
+		;;
 	m3|\
 	m4|\
 	x5|\
@@ -304,6 +330,10 @@ ramips_setup_macs()
 		lan_mac=$(cat /sys/class/net/eth0/address)
 		lan_mac=$(macaddr_add "$lan_mac" -2)
 		;;
+	newifi-d1)
+		lan_mac=$(cat /sys/class/net/eth0/address)
+		lan_mac=$(macaddr_add "$lan_mac" 2)
+		;;
 	oy-0001)
 		lan_mac=$(mtd_get_mac_binary factory 40)
 		wan_mac=$(mtd_get_mac_binary factory 46)
@@ -317,12 +347,10 @@ ramips_setup_macs()
 		wan_mac=$(mtd_get_mac_binary factory 57350)
 		;;
 	tew-691gr)
-		lan_mac=$(cat /sys/class/net/eth0/address)
-		wan_mac=$(macaddr_add "$lan_mac" 3)
+		wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 3)
 		;;
 	tew-692gr)
-		lan_mac=$(cat /sys/class/net/eth0/address)
-		wan_mac=$(macaddr_add "$lan_mac" 4)
+		wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 1)
 		;;
 	tiny-ac)
 		lan_mac=$(mtd_get_mac_ascii u-boot-env LAN_MAC_ADDR)
@@ -357,8 +385,8 @@ ramips_setup_macs()
 		;;
 	esac
 
-	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac
-	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac
+	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
 }
 
 board_config_update