X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Flantiq%2Fbase-files%2Fetc%2Fboard.d%2F02_network;h=6140a160355cbe3ba5b1d4a3e617596715712a19;hb=d49920e45044dfb635a93f317e5b965b5c8afdad;hp=16b85a815b914eec2bc200143d2f4f6dc300305b;hpb=ecab50023289fc1626dc0e080462897790039b75;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network
index 16b85a815b..6140a16035 100755
--- a/target/linux/lantiq/base-files/etc/board.d/02_network
+++ b/target/linux/lantiq/base-files/etc/board.d/02_network
@@ -58,7 +58,7 @@ ARV7519PW)
 ARV7519RW22)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 22)" 1)
 	ucidef_add_switch "switch0" \
-		"0:lan" "2:lan" "3:lan" "4:lan" "5:lan" "6t@eth0"
+		"0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
 	;;
 
 BTHOMEHUBV2B)
@@ -75,7 +75,8 @@ BTHOMEHUBV3A)
 	;;
 
 BTHOMEHUBV5A)
-	wan_mac=$(macaddr_add "$(mtd_get_mac_binary caldata 4364)" 1)
+	lan_mac=$(mtd_get_mac_binary_ubi caldata 4364)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_add_switch "switch0" \
 		"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
 	;;
@@ -92,7 +93,16 @@ EASY80920NAND|EASY80920NOR)
 		"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
 	;;
 
+FRITZ3370)
+	wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2439)" 1)
+	;;
+
+FRITZ7320)
+	wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
+	;;
+
 FRITZ7360SL)
+	wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
 	ucidef_add_switch "switch0" \
 		"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
 	;;
@@ -133,13 +143,13 @@ VR200v)
 		"0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
 	;;
 
-VGV7510KW22)
+VGV7510KW22*)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
 	ucidef_add_switch "switch0" \
 		"2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "6t@eth0"
 	;;
 
-VGV7519)
+VGV7519*)
 	wan_mac=$(mtd_get_mac_binary board_config 22)
 	ucidef_add_switch "switch0" \
 		"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "6t@eth0"
@@ -167,7 +177,7 @@ if [ -n "$(ls /lib/modules/`uname -r`/ltq_atm*)" ]; then
 	ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload"
 fi
 
-if grep -qE "system type.*: (VR9|xRX200)" /proc/cpuinfo; then
+if lantiq_is_vdsl_system; then
 	interface_wan="ptm0"
 	ucidef_add_vdsl_modem "$annex" "av" "ptm"
 else