X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fbrcm-2.4%2Fbase-files%2Fetc%2Finit.d%2Fnetconfig;h=d63f17b124e0b35309f0956278c4c31eb47bf3d8;hb=46f75ee8698d09dcbb97447fcd2c6f5473c52331;hp=7e3ebcdbf16222546bb761e127fc2c42614325ff;hpb=5d22a524408c25d11382cdc9f43cc26c5e7326d6;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
index 7e3ebcdbf1..d63f17b124 100755
--- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
+++ b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
@@ -4,7 +4,41 @@
 START=05
 
 start() {
-	[ -e /etc/config/network ] && exit 0
+	[ -e /etc/config/network ] && {
+		local batch
+
+		config_cb() {
+			case "$1" in
+			switch)
+				option_cb() {
+					case "$1" in
+					vlan[0-9]|vlan1[0-5])
+						local id="${1#vlan}"
+						append batch "delete network.eth0.${1}${N}"
+						append batch "set network.eth0_${id}=switch_vlan${N}"
+						append batch "set network.eth0_${id}.device=eth0${N}"
+						append batch "set network.eth0_${id}.vlan=${id}${N}"
+						append batch "set network.eth0_${id}.ports='${2}'${N}"
+					;;
+					esac
+				}
+			;;
+			switch_vlan)
+				option_cb() { :; }
+				batch=""
+			;;
+			esac
+		}
+
+		config_load network
+
+		[ -n "$batch" ] && {
+			logger -t netconfig "migrating switch config to new format ..."
+			echo "$batch${N}commit network" | uci batch
+		}
+
+		exit 0
+	}
 
 	mkdir -p /etc/config
 
@@ -13,13 +47,23 @@ start() {
 			# WGT634u
 			echo boardtype=wgt634u
 		else
-			strings /dev/mtdblock/3
+			strings "$(find_mtd_part nvram)"
 		fi
 	) | awk '
 	function p(cfgname, name) {
 		if (c[name] != "") print "	option " cfgname "	\"" c[name] "\""
 	}
 
+	function vlan(id, name) {
+		if (c[name] != "") {
+			print "config switch_vlan eth0_" id
+			print "	option device   \"eth0\""
+			print "	option vlan     " id
+			print "	option ports    \"" c[name] "\""
+			print ""
+		}
+	}
+
 	function macinc(mac, maca, i, result) {
 		split(mac, maca, ":")
 		for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
@@ -47,20 +91,40 @@ start() {
 			mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
 		}
 	}
-	
+
 	($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
 		nvram[$1] = $2
 	}
-	
+
 	END {
 		if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
 			c["wan_ifname"] = ""
 			c["lan_ifname"] = "eth1"
 		}
+		if (model == "ASUS WL-330gE") {
+			c["wan_ifname"] = ""
+			c["lan_ifname"] = "eth0"
+			c["vlan0ports"] = ""
+			c["vlan1ports"] = ""
+		}
 		if (model == "ASUS WL-500g") {
 			c["wan_ifname"] = "eth1"
 			c["lan_ifname"] = "eth0"
 		}
+		if (model == "ASUS WL-500g Premium V2") {
+				c["vlan0ports"] = "0 1 2 3 5*"
+				c["vlan1ports"] = "4 5"
+		}
+		if (model == "Dell TrueMobile 2300") {
+			c["lan_ifname"] = "eth0"
+			c["wan_ifname"] = "eth1"
+			c["vlan0ports"] = "0 1 2 3 4 5u"
+			c["vlan1ports"] = ""
+		}
+		if (model == "Dell TrueMobile 2300 v2") {
+			c["vlan0ports"] = "0 1 2 3 5*"
+			c["vlan1ports"] = "4 5"
+		}
 		if (nvram["boardtype"] == "bcm94710r4") {
 			# Toshiba WRC-1000
 			c["lan_ifname"] = "eth0"
@@ -93,6 +157,20 @@ start() {
 				}
 			}
 		}
+		# Buffalo WBR-B11 and Buffalo WBR-G54
+		if (nvram["boardtype"] == "bcm94710ap") {
+			c["vlan0ports"] = "0 1 2 3 4 5u"
+			c["vlan1ports"] = ""
+			c["lan_ifname"] = "eth0"
+			c["wan_ifname"] = "eth1"
+		}
+		# generic broadcom 4705/4785 processor with 5397 switch?
+		#  EXCEPT Linksys WRT300N V1.1
+		if ((nvram["boardtype"] == "0x478") && \
+		    (model != "Linksys WRT300N V1.1")) {
+			c["vlan0ports"] = "1 2 3 4 8*"
+			c["vlan1ports"] = "0 8"
+		}
 
 		# WAP54G
 		if ((nvram["boardnum"] == "2") || \
@@ -100,13 +178,44 @@ start() {
 			c["lan_ifname"]="eth0"
 			c["wan_ifname"]=""
 		}
-	
-		print "#### VLAN configuration "
-		print "config switch eth0"
-		p("vlan0", "vlan0ports")
-		p("vlan1", "vlan1ports")
-		print ""
-		print ""
+
+		# Sitecom WL-105b
+		if ((nvram["boardum"] == "2") && \
+			(nvram["GemtekPmonVer"] == "1")) {
+			c["lan_ifname"]="eth0"
+			c["wan_ifname"]=""
+		}
+
+		# ASUS WL-700gE
+		# These are actually same as defaults above. For some reason this script applies
+		# Generic BCM94704 settings instead so we revert to proper settings here.
+		# Hopefully someone will fix this properly soon.
+		if (model == "ASUS WL-700gE") {
+			c["lan_ifname"]="eth0.0"
+			c["wan_ifname"]="eth0.1"
+			c["vlan0ports"]="1 2 3 4 5*"
+			c["vlan1ports"]="0 5"
+		}
+
+		if (model == "Motorola WR850G V2/V3") {
+			c["vlan0ports"]="0 1 2 3 5*"
+			c["vlan1ports"]="4 5"
+		}
+		if (model == "ASUS WL-500W") {
+			c["lan_ifname"] = "eth0"
+			c["wan_ifname"] = "eth1"
+			c["vlan0ports"] = "0 1 2 3 4 5u"
+			c["vlan1ports"] = ""
+		}
+
+		if (c["vlan0ports"] || c["vlan1ports"]) {
+			print "#### VLAN configuration "
+			print "config switch eth0"
+			print "	option enable   1"
+			print ""		
+			vlan(0, "vlan0ports")
+			vlan(1, "vlan1ports")
+		}
 		print "#### Loopback configuration"
 		print "config interface loopback"
 		print "	option ifname	\"lo\""
@@ -125,10 +234,16 @@ start() {
 		print "	option netmask	255.255.255.0"
 		print ""
 		print ""
-		print "#### WAN configuration"
-		print "config interface	wan"
-		p("ifname", "wan_ifname")
-		p("macaddr", "wan_macaddr")
-		print "	option proto	dhcp"
+		if (c["wan_ifname"]) {
+			print "#### WAN configuration"
+			print "config interface	wan"
+			p("ifname", "wan_ifname")
+			p("macaddr", "wan_macaddr")
+			print "	option proto	dhcp"
+		} else {
+			print "#### WAN configuration (disabled)"
+			print "#config interface wan"
+			print "#	option proto	dhcp"
+		}
 	}' > /etc/config/network
 }