X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fbcm53xx%2Fimage%2FMakefile;h=22507b04809ec036c149531d4b1405aa9545d662;hb=1bef5050ef62e82e061b9e6d88262dafd52fe966;hp=70bd2f9eb334f90cdc9d3c433690e308f613388e;hpb=251b42d4918a4508e71355669009399dfd5b47c4;p=openwrt%2Fopenwrt.git diff --git a/target/linux/bcm53xx/image/Makefile b/target/linux/bcm53xx/image/Makefile index 70bd2f9eb3..22507b0480 100644 --- a/target/linux/bcm53xx/image/Makefile +++ b/target/linux/bcm53xx/image/Makefile @@ -12,89 +12,223 @@ define Image/Prepare echo -ne '\xde\xad\xc0\xde' > $(KDIR)/fs_mark $(call prepare_generic_squashfs,$(KDIR)/fs_mark) - $(CP) ./ubinize.cfg $(KDIR) + # For UBI we want only one extra block + rm -f $(KDIR)/ubi_mark + echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark endef -define trx2ndpart/serial --a 1024 -f $(KDIR)/root.squashfs -a 0x10000 -A $(KDIR)/fs_mark +define Build/lzma-d16 + $(STAGING_DIR_HOST)/bin/lzma e $@ -d16 $(1) $@.new + mv $@.new $@ endef -define trx2ndpart/nand-0x20000-0x800 --a 0x20000 -f $(KDIR)/root-block-0x20000-min-0x800.ubi -a 0x20000 -A $(KDIR)/fs_mark +define Build/trx-serial + $(STAGING_DIR_HOST)/bin/trx \ + -o $@.new \ + -m 33554432 \ + -f $(IMAGE_KERNEL) -a 1024 \ + -f $@ -a 0x10000 -A $(KDIR)/fs_mark + mv $@.new $@ endef -# $(1): dts filename (also used for the firmware file). -# $(2): flash type (not used). -define Image/Build/initramfs/DTB - $(call Image/Build/DTB,zImage-initramfs,$(1)) - $(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/$(IMG_PREFIX)-$(1)-initramfs.trx \ - -f $(KDIR)/zImage-initramfs-$(1).lzma +define Build/trx-nand + # kernel: always use 4 MiB (-28 B or TRX header) to allow upgrades even + # if it grows up between releases + # root: UBI with one extra block containing UBI mark to trigger erasing + # rest of partition + $(STAGING_DIR_HOST)/bin/trx \ + -o $@.new \ + -m 33554432 \ + -f $(IMAGE_KERNEL) -a 0x20000 -b 0x400000 \ + -f $@ \ + -A $(KDIR)/ubi_mark -a 0x20000 + mv $@.new $@ endef -# $(1): dts filename (also used for the firmware file). -# $(2): flash type. -define Image/Build/squashfs/DTB - $(call Image/Build/DTB,zImage,$(1)) - $(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/$(IMG_PREFIX)-$(1)-squashfs.trx \ - -f $(KDIR)/zImage-$(1).lzma \ - $(call trx2ndpart/$(2)) +define Build/asus-trx + $(STAGING_DIR_HOST)/bin/asustrx \ + -p $(PRODUCTID) -i $@ -o $@.new + mv $@.new $@ endef -# $(1): kernel (Linux) image file -# $(2): dts filename (also used for the firmware file). -define Image/Build/DTB - rm -f $(KDIR)/$(1)-$(2).lzma - rm -f $(KDIR)/$(1)-$(2).dts - cat $(KDIR)/$(1) $(DTS_DIR)/$(2).dtb > $(KDIR)/$(1)-$(2).dts; - $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/$(1)-$(2).dts $(KDIR)/$(1)-$(2).lzma -d16 +define Build/seama-nand + # Seama entity + $(STAGING_DIR_HOST)/bin/oseama \ + entity $@.entity \ + -m "dev=/dev/mtdblock/7" \ + -m "type=firmware" \ + -f $(IMAGE_KERNEL) \ + -b 0x400000 \ + -f $@ \ + -f $(KDIR)/ubi_mark + # Seama container + $(STAGING_DIR_HOST)/bin/seama \ + -s $@ \ + -m "signature=$(SIGNATURE)" \ + -i $@.entity endef -# $(1): filesystem type (e.g. squashfs, initramfs). -# $(2): dts filename (also used for the firmware file). -# $(3): flash type. -# $(4): device specific magic. -define Image/Build/AsusTrx - $(call Image/Build/$(1)/DTB,$(2),$(3)) - # TODO: Put magic in TRX file - cp $(KDIR)/$(IMG_PREFIX)-$(2)-$(1).trx $(BIN_DIR)/ +DEVICE_VARS += PRODUCTID SIGNATURE NETGEAR_BOARD_ID NETGEAR_REGION + +USB2_PACKAGES := kmod-usb-ohci kmod-usb2 +USB3_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb3 + +define Device/Default + # .dtb files are prefixed by SoC type, e.g. bcm4708- which is not included in device/image names + # extract the full dtb name based on the device info + DEVICE_DTS := $(patsubst %.dtb,%,$(notdir $(wildcard $(if $(IB),$(KDIR),$(DTS_DIR))/*-$(1).dtb))) + KERNEL := kernel-bin | append-dtb | lzma-d16 + KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts) + FILESYSTEMS := squashfs + KERNEL_NAME := zImage + IMAGE_NAME = $$(IMAGE_PREFIX)-$$(1).$$(2) + IMAGES := trx + BLOCKSIZE := 128KiB + PAGESIZE := 2048 + UBINIZE_OPTS := + IMAGE/trx := append-ubi | trx-nand +endef + +define Device/asus + IMAGES := trx + IMAGE/trx := append-ubi | trx-nand | asus-trx +endef + +define Device/asus-rt-ac56u + DEVICE_TITLE := Asus RT-AC56U + DEVICE_PACKAGES := kmod-b43 $(USB3_PACKAGES) +endef +TARGET_DEVICES += asus-rt-ac56u + +define Device/asus-rt-ac68u + DEVICE_TITLE := Asus RT-AC68U + DEVICE_PACKAGES := $(USB3_PACKAGES) +endef +TARGET_DEVICES += asus-rt-ac68u + +define Device/asus-rt-ac87u + DEVICE_TITLE := Asus RT-AC87U + DEVICE_PACKAGES := $(USB3_PACKAGES) endef +TARGET_DEVICES += asus-rt-ac87u -# $(1): filesystem type (e.g. squashfs, initramfs). -# $(2): dts filename (also used for the firmware file). -# $(3): flash type. -define Image/Build/Trx - $(call Image/Build/$(1)/DTB,$(2),$(3)) - cp $(KDIR)/$(IMG_PREFIX)-$(2)-$(1).trx $(BIN_DIR)/ +define Device/asus-rt-n18u + DEVICE_TITLE := Asus RT-N18U + DEVICE_PACKAGES := $(USB3_PACKAGES) endef +TARGET_DEVICES += asus-rt-n18u -# $(1): filesystem type (e.g. squashfs, initramfs). -# $(2): dts filename (also used for the firmware file). -# $(3): flash type. -# $(4): board_id (device specific magic). -# $(5): region. -define Image/Build/Chk - $(call Image/Build/$(1)/DTB,$(2),$(3)) - $(STAGING_DIR_HOST)/bin/mkchkimg -o $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1).chk -k $(KDIR)/$(IMG_PREFIX)-$(2)-$(1).trx -b $(4) -r $(5) +define Device/buffalo-wxr-1900dhp + DEVICE_TITLE := Buffalo WXR-1900DHP + DEVICE_PACKAGES := $(USB3_PACKAGES) endef +TARGET_DEVICES += buffalo-wxr-1900dhp -# $(1): filesystem type (e.g. squashfs, initramfs). -define Image/Build - ( cd $(KDIR); $(STAGING_DIR_HOST)/bin/ubinize -p 128KiB -m 2048 -o $(KDIR)/root-block-0x20000-min-0x800.ubi ubinize.cfg ) +define Device/buffalo-wzr-600dhp2 + DEVICE_TITLE := Buffalo WZR-600DHP2 + DEVICE_PACKAGES := kmod-b43 $(USB2_PACKAGES) +endef +TARGET_DEVICES += buffalo-wzr-600dhp2 - $(call Image/Build/AsusTrx,$(1),bcm47081-asus-rt-n18u,nand-0x20000-0x800,RT-N18U) - $(call Image/Build/AsusTrx,$(1),bcm4709-asus-rt-ac87u,nand-0x20000-0x800,RT-N18U) +define Device/buffalo-wzr-900dhp + DEVICE_TITLE := Buffalo WZR-900DHP + DEVICE_PACKAGES := kmod-b43 $(USB3_PACKAGES) +endef +TARGET_DEVICES += buffalo-wzr-900dhp + +define Device/buffalo-wzr-1750dhp + DEVICE_TITLE := Buffalo WZR-1750DHP + DEVICE_PACKAGES := kmod-b43 $(USB3_PACKAGES) +endef +TARGET_DEVICES += buffalo-wzr-1750dhp + +define Device/dlink + IMAGES := bin + IMAGE/bin := append-ubi | seama-nand +endef + +define Device/dlink-dir-885l + DEVICE_TITLE := D-Link DIR-885L + DEVICE_PACKAGES := kmod-brcmfmac $(USB3_PACKAGES) + $(Device/dlink) + SIGNATURE := wrgac42_dlink.2015_dir885l +endef +TARGET_DEVICES += dlink-dir-885l - $(call Image/Build/Chk,$(1),bcm4708-netgear-r6250,nand-0x20000-0x800,U12H245T00_NETGEAR,1) - $(call Image/Build/Chk,$(1),bcm4708-netgear-r6300-v2,nand-0x20000-0x800,U12H240T00_NETGEAR,1) - $(call Image/Build/Chk,$(1),bcm4709-netgear-r8000,nand-0x20000-0x800,U12H315T00_NETGEAR,1) - - $(call Image/Build/Trx,$(1),bcm4708-buffalo-wzr-1750dhp,nand-0x20000-0x800) - $(call Image/Build/Trx,$(1),bcm47081-buffalo-wzr-600dhp2,nand-0x20000-0x800) - $(call Image/Build/Trx,$(1),bcm47081-buffalo-wzr-900dhp,nand-0x20000-0x800) +define Device/linksys-ea6300-v1 + DEVICE_TITLE := Linksys EA6300 V1 + DEVICE_PACKAGES := kmod-b43 $(USB3_PACKAGES) endef +TARGET_DEVICES += linksys-ea6300-v1 -define Image/Build/Initramfs - $(call Image/Build,initramfs) +define Device/netgear + IMAGES := chk + IMAGE/chk := append-ubi | trx-nand | netgear-chk + NETGEAR_REGION := 1 endef +define Device/netgear-r6250 + DEVICE_TITLE := Netgear R6250 + DEVICE_PACKAGES := kmod-b43 $(USB3_PACKAGES) + $(Device/netgear) + NETGEAR_BOARD_ID := U12H245T00_NETGEAR +endef + +define Device/netgear-r6300-v2 + DEVICE_TITLE := Netgear R6300 V2 + DEVICE_PACKAGES := kmod-b43 $(USB3_PACKAGES) + $(Device/netgear) + NETGEAR_BOARD_ID := U12H240T00_NETGEAR +endef + +define Device/netgear-r7000 + DEVICE_TITLE := Netgear R7000 + DEVICE_PACKAGES := $(USB3_PACKAGES) + $(Device/netgear) + NETGEAR_BOARD_ID := U12H270T00_NETGEAR +endef +TARGET_DEVICES += netgear-r7000 + +define Device/netgear-r7900 + DEVICE_TITLE := Netgear R7900 + DEVICE_PACKAGES := kmod-brcmfmac $(USB3_PACKAGES) + $(Device/netgear) + NETGEAR_BOARD_ID := U12H315T30_NETGEAR +endef +TARGET_DEVICES += netgear-r7900 + +define Device/netgear-r8000 + DEVICE_TITLE := Netgear R8000 + DEVICE_PACKAGES := kmod-brcmfmac $(USB3_PACKAGES) + $(Device/netgear) + NETGEAR_BOARD_ID := U12H315T00_NETGEAR +endef + +define Device/netgear-r8500 + DEVICE_TITLE := Netgear R8500 + DEVICE_PACKAGES := kmod-brcmfmac $(USB3_PACKAGES) + $(Device/netgear) + NETGEAR_BOARD_ID := U12H334T00_NETGEAR +endef +# TARGET_DEVICES += netgear-r8500 + +define Device/smartrg-sr400ac + DEVICE_TITLE := SmartRG SR400ac + DEVICE_PACKAGES := kmod-brcmfmac $(USB3_PACKAGES) + IMAGES := trx + IMAGE/trx := append-rootfs | trx-serial +endef + +define Device/tenda-ac9 + DEVICE_TITLE := Tenda AC9 + DEVICE_PACKAGES := $(USB2_PACKAGES) + IMAGES := trx + IMAGE/trx := append-rootfs | trx-serial +endef +TARGET_DEVICES += tenda-ac9 + +TARGET_DEVICES += \ + netgear-r6250 netgear-r6300-v2 netgear-r8000 \ + smartrg-sr400ac + $(eval $(call BuildImage))