X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Far71xx%2Ffiles%2Farch%2Fmips%2Fath79%2FKconfig.openwrt;h=9e1b50e262a8aee63bf5ea7390912fdd343472a7;hb=c198ca682c187e61730119134e1dde75da2e7a16;hp=ac8255b8a321867a3596e8442e764b0b67d501c6;hpb=016520330440cb0aca4367150911721b748f75e8;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index ac8255b8a3..9e1b50e262 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -174,6 +174,15 @@ config ATH79_MACH_AP83
 	select ATH79_DEV_USB
 	select ATH79_DEV_WMAC
 
+config ATH79_MACH_AP90Q
+	bool "YunCore AP90Q support"
+	select SOC_QCA953X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
 config ATH79_MACH_AP96
 	bool "Atheros AP96 board support"
 	select SOC_AR71XX
@@ -271,6 +280,17 @@ config ATH79_MACH_SOM9331
 	select ATH79_DEV_USB
 	select ATH79_DEV_WMAC
 
+config ATH79_MACH_SR3200
+	bool "YunCore SR3200 support"
+	select SOC_QCA956X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
 config ATH79_MACH_BHR_4GRV2
 	bool "Buffalo BHR-4GRV2 board support"
 	select SOC_QCA955X
@@ -416,6 +436,16 @@ config ATH79_MACH_WPJ558
 	select ATH79_DEV_USB
 	select ATH79_DEV_WMAC
 
+config ATH79_MACH_XD3200
+	bool "YunCore XD3200 support"
+	select SOC_QCA956X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
 config ATH79_MACH_DGL_5500_A1
 	bool "D-Link DGL-5500 A1 support"
 	select SOC_QCA955X
@@ -553,10 +583,6 @@ config ATH79_MACH_DOMYWIFI_DW33D
 	select ATH79_DEV_NFC
 	select ATH79_DEV_WMAC
 	select ATH79_DEV_USB
-	select MTD_NAND
-	select MTD_NAND_ECC
-	select MTD_NAND_AR934X
-	select MTD_NAND_AR934X_HW_ECC
 
 config ATH79_MACH_DR344
 	bool "Wallys DR344 board support"
@@ -1202,6 +1228,24 @@ config ATH79_MACH_CPE510
 	select ATH79_DEV_M25P80
 	select ATH79_DEV_WMAC
 
+config ATH79_MACH_CPE830
+	bool "YunCore CPE830 support"
+	select SOC_QCA953X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_CPE870
+	bool "YunCore CPE870 support"
+	select SOC_AR934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
 config ATH79_MACH_TL_MR11U
 	bool "TP-LINK TL-MR11U/TL-MR3040 support"
 	select SOC_AR933X
@@ -1677,7 +1721,7 @@ config ATH79_MACH_CARAMBOLA2
 	select ATH79_DEV_WMAC
 
 config ATH79_MACH_CF_E316N_V2
-	bool "COMFAST CF-E316N v2 board"
+	bool "COMFAST CF-E316N v2 support"
 	select SOC_AR934X
 	select ATH79_DEV_ETH
 	select ATH79_DEV_GPIO_BUTTONS
@@ -1686,6 +1730,58 @@ config ATH79_MACH_CF_E316N_V2
 	select ATH79_DEV_USB
 	select ATH79_DEV_WMAC
 
+config ATH79_MACH_CF_E320N_V2
+	bool "COMFAST CF-E320N v2 support"
+	select SOC_QCA953X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_CF_E380AC_V1
+	bool "COMFAST CF-E380AC v1 support"
+	select SOC_QCA955X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_CF_E380AC_V2
+	bool "COMFAST CF-E380AC v2 support"
+	select SOC_QCA955X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_CF_E520N
+	bool "COMFAST CF-E520N support"
+	select SOC_QCA953X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
+config ATH79_MACH_CF_E530N
+	bool "COMFAST CF-E530N support"
+	select SOC_QCA953X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
 config ATH79_MACH_BHU_BXU2000N2_A
 	bool "BHU BXU2000n-2 rev. A support"
 	select SOC_AR934X