X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Far71xx%2Fbase-files%2Fetc%2Fuci-defaults%2F02_network;h=af8725e8975b6dfe8b0f5ba338aa4c8ccf385f88;hb=2c72ffc154c70b371a93f179587d899bbba921ca;hp=0819cb2426cdc2ca429db9d7419669e733b2d19a;hpb=d4cc7aac4b2113cc9a757cc1e9a5c6390005329e;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index 0819cb2426..af8725e897 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -22,15 +22,22 @@ ubnt-unifi-outdoor)
 	ucidef_set_interface_lan "eth0 eth1"
 	;;
 
-ap132)
+ap132 |\
+wlr8100)
 	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 	ucidef_add_switch "switch0" "1" "1"
 	ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
 	ucidef_add_switch_vlan "switch0" "2" "0t 1"
 	;;
 
-ap136-010 |\
-wlr8100)
+esr1750)
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+	ucidef_add_switch "switch0" "1" "1"
+	ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
+	ucidef_add_switch_vlan "switch0" "2" "0t 1"
+	;;
+
+ap136-010)
 	ucidef_set_interfaces_lan_wan "eth0" "eth1"
 	ucidef_add_switch "switch0" "1" "1"
 	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
@@ -38,14 +45,18 @@ wlr8100)
 	;;
 
 ap136-020 |\
-ap135-020)
+ap135-020 |\
+tl-wr1043nd-v2 |\
+wzr-450hp2)
 	ucidef_set_interfaces_lan_wan "eth1" "eth0"
 	ucidef_add_switch "switch0" "1" "1"
 	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4"
 	ucidef_add_switch_vlan "switch0" "2" "5 6"
 	;;
 
-archer-c7)
+archer-c5 |\
+archer-c7 |\
+tl-wdr4900-v2)
 	ucidef_set_interfaces_lan_wan "eth1" "eth0"
 	ucidef_add_switch "switch0" "1" "1"
 	ucidef_add_switch_vlan "switch0" "1" "0 2 3 4 5"
@@ -55,7 +66,9 @@ archer-c7)
 db120 |\
 rb-2011l | \
 rb-2011uas |\
-rb-2011uas-2hnd)
+rb-2011uias |\
+rb-2011uas-2hnd|\
+rb-2011uias-2hnd)
 	ucidef_set_interfaces_lan_wan "eth0.1 eth1" "eth0.2"
 	ucidef_add_switch "switch0" "1" "1"
 	ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
@@ -64,7 +77,7 @@ rb-2011uas-2hnd)
 	ucidef_add_switch_vlan "switch1" "1" "0 1 2 3 4 5"
 
 	case "$board" in
-	rb-2011uas*)
+	rb-2011uas* | rb-2011uias | rb-2011uias-2hnd)
 		ucidef_set_interface_raw "sfp" "eth0.3"
 		ucidef_add_switch_vlan "switch0" "3" "0t 6"
 		;;
@@ -84,6 +97,13 @@ nbg460n_550n_550nh)
 	ucidef_add_switch_vlan "switch0" "0" "0 1 2 3 5"
 	;;
 
+nbg6716)
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
+	ucidef_add_switch "switch0" "1" "1"
+	ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
+	ucidef_add_switch_vlan "switch0" "2" "5 6"
+	;;
+
 rb-433 |\
 rb-433u)
 	ucidef_set_interfaces_lan_wan "eth1" "eth0"
@@ -121,6 +141,10 @@ wzr-hp-g450h)
 	ucidef_add_switch_vlan "switch0" "2" "0t 1"
 	;;
 
+rb-951ui-2hnd)
+	ucidef_set_interfaces_lan_wan "eth1" "eth0"
+	;;
+
 rb-493g)
 	ucidef_set_interfaces_lan_wan "eth0 eth1.1" "eth1.2"
 	ucidef_add_switch "switch0" "1" "1"
@@ -139,6 +163,16 @@ ap113)
 	ucidef_add_switch_vlan "switch0" "2" "0t 2"
 	;;
 
+el-m150)
+	ucidef_set_interfaces_lan_wan "eth1" "eth0"
+	ucidef_add_switch "switch0" "1" "1"
+	ucidef_add_switch_vlan "switch0" "1" "0 1 3"
+	;;
+
+el-mini)
+	ucidef_set_interface_lan "eth0"
+	;;
+
 tl-wdr4300|\
 tl-wr1041n-v2)
 	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
@@ -167,9 +201,12 @@ tl-wr941nd)
 	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
 	;;
 
+smart-300 | \
 tl-mr3420-v2 |\
 tl-wr841n-v8 |\
+tl-wr842n-v2 |\
 wnr2000-v3 |\
+wnr2000-v4 |\
 wnr2200 |\
 wnr612-v2)
 	ucidef_set_interfaces_lan_wan "eth1" "eth0"
@@ -183,6 +220,13 @@ uap-pro)
 	ucidef_add_switch_vlan "switch0" "1" "0 1 2"
 	;;
 
+nanostation-m-xw)
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+	ucidef_add_switch "switch0" "1" "1"
+	ucidef_add_switch_vlan "switch0" "1" "0t 5"
+	ucidef_add_switch_vlan "switch0" "2" "0t 1"
+	;;
+
 wrt160nl)
 	ucidef_set_interfaces_lan_wan "eth0" "eth1"
 	ucidef_add_switch "switch0" "1" "1"
@@ -201,26 +245,59 @@ dir-825-c1)
 	ucidef_add_switch "switch0" "1" "1"
 	ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
 	ucidef_add_switch_vlan "switch0" "2" "0t 5"
-	mac=$(mtd_get_mac_ascii nvram "^wan_mac")
+	mac=$(mtd_get_mac_ascii nvram "wan_mac")
+	[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
+	;;
+
+mynet-n750)
+	local mac
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+	ucidef_add_switch "switch0" "1" "1"
+	ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
+	ucidef_add_switch_vlan "switch0" "2" "0t 5"
+	mac=$(mtd_get_mac_ascii devdata "wanmac")
 	[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
 	;;
 
 dir-835-a1 |\
+wndr3700v4 | \
 wndr4300)
 	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 	ucidef_add_switch "switch0" "1" "1"
 	ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
 	ucidef_add_switch_vlan "switch0" "2" "0t 5"
+	mac_lan=$(mtd_get_mac_binary caldata 0)
+	[ -n "$mac_lan" ] && ucidef_set_interface_macaddr "lan" "$mac_lan"
+	mac_wan=$(mtd_get_mac_binary caldata 6)
+	[ -n "$mac_wan" ] && ucidef_set_interface_macaddr "wan" "$mac_wan"
+	;;
+
+esr900)
+	local mac
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+	ucidef_add_switch "switch0" "1" "1"
+	ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
+	ucidef_add_switch_vlan "switch0" "2" "0t 5"
+	mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")
+	[ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
 	;;
 
 all0305 |\
 aw-nr580 |\
 bullet-m |\
 cap4200ag |\
+eap300v2 |\
 eap7660d |\
+loco-m-xw |\
 mr600 |\
 mr600v2 |\
 rb-411 |\
+rb-911g-2hpnd |\
+rb-911g-5hpnd |\
+rb-912uag-2hpnd |\
+rb-912uag-5hpnd |\
+rb-sxt2n |\
+rb-sxt5n |\
 tl-mr10u |\
 tl-mr11u |\
 tl-mr13u |\
@@ -229,9 +306,13 @@ tl-mr3040 |\
 tl-mr3040-v2 |\
 tl-wa750re |\
 tl-wa850re |\
+tl-wa830re-v2 |\
+tl-wa801nd-v2 |\
 tl-wa901nd |\
 tl-wa901nd-v2 |\
+tl-wa901nd-v3 |\
 tl-wr703n |\
+tube2h |\
 wndap360 |\
 mynet-rext |\
 wp543)
@@ -245,6 +326,7 @@ dir-505-a1)
 alfa-ap96 |\
 alfa-nx |\
 ap83 |\
+gl-inet |\
 jwap003 |\
 pb42 |\
 pb44 |\
@@ -261,9 +343,13 @@ ap96 |\
 airrouter |\
 dir-600-a1 |\
 dir-615-c1 |\
+dir-615-e1 |\
 dir-615-e4 |\
+hiwifi-hc6361 |\
 ja76pf |\
 mynet-n600 |\
+oolite |\
+qihoo-c301 |\
 rb-750 |\
 rb-751 |\
 tew-632brp |\
@@ -275,6 +361,7 @@ tl-wdr3500 |\
 tl-wr741nd |\
 tl-wr741nd-v4 |\
 tl-wr841n-v7 |\
+tl-wr841n-v9 |\
 whr-g301n |\
 whr-hp-g300n |\
 whr-hp-gn |\
@@ -292,9 +379,10 @@ wzr-hp-g450h)
 	;;
 
 ew-dorin)
-	ucidef_set_interface_lan "eth0"
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 	ucidef_add_switch "switch0" "1" "1"
-	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3"
+	ucidef_add_switch_vlan "switch0" "1" "0t 1 2"
+	ucidef_add_switch_vlan "switch0" "2" "0t 3"
 	;;
 
 ew-dorin-router)
@@ -303,6 +391,46 @@ ew-dorin-router)
 	ucidef_add_switch_vlan "switch0" "1" "0 2 3"
 	;;
 
+wndr3700)
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
+	ucidef_add_switch "switch0" "1" "1"
+	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
+	# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
+	uci set network.@switch[-1].blinkrate='2'
+
+	ucidef_add_switch_port "switch0" "1"
+	# Port 1 controls the GREEN configuration of LEDs for
+	# the switch and the section does not correspond to a real
+	# switch port.
+	#
+	# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
+	# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
+	# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
+	# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
+	# 14: Link (master); 15: separate register
+	uci set network.@switch_port[-1].led='6'
+
+	ucidef_add_switch_port "switch0" "2"
+	# Port 2 controls the ORANGE configuration of LEDs for
+	# the switch and the section does not correspond to a real
+	# switch port.
+	#
+	# See the key above for switch port 1 for the meaning of the
+	# 'led' setting below.
+	uci set network.@switch_port[-1].led='9'
+
+	ucidef_add_switch_port "switch0" "5"
+	# Port 5 controls the configuration of the WAN LED and the
+	# section does not correspond to a real switch port.
+	#
+	# To toggle the use of green or orange LEDs for the WAN port,
+	# see the LED setting for wndr3700:green:wan in /etc/config/system.
+	#
+	# See the key above for switch port 1 for the meaning of the
+	# 'led' setting below.
+	uci set network.@switch_port[-1].led='2'
+	;;
+
 *)
 	ucidef_set_interfaces_lan_wan "eth0" "eth1"
 	;;