+// SPDX-License-Identifier: BSD-2-Clause
/*
Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
-
- 1. Redistributions of source code must retain the above copyright notice,
- this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright notice,
- this list of conditions and the following disclaimer in the documentation
- and/or other materials provided with the distribution.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <assert.h>
+#include <ctype.h>
#include <errno.h>
#include <stdbool.h>
+#include <stddef.h>
#include <stdio.h>
#include <stdint.h>
#include <stdlib.h>
uint32_t size;
};
+/** Partition trailing padding definitions
+ * Values 0x00 to 0xff are reserved to indicate the padding value
+ * Values from 0x100 are reserved to indicate other behaviour */
+enum partition_trail_value {
+ PART_TRAIL_00 = 0x00,
+ PART_TRAIL_FF = 0xff,
+ PART_TRAIL_MAX = 0xff,
+ PART_TRAIL_NONE = 0x100
+};
+
+/** soft-version value overwrite types
+ * The default (for an uninitialised soft_ver field) is to use the numerical
+ * version number "0.0.0"
+ */
+enum soft_ver_type {
+ SOFT_VER_TYPE_NUMERIC = 0,
+ SOFT_VER_TYPE_TEXT = 1,
+};
+
/** Firmware layout description */
struct device_info {
const char *id;
const char *vendor;
const char *support_list;
- char support_trail;
- const char *soft_ver;
+ enum partition_trail_value part_trail;
+ struct {
+ enum soft_ver_type type;
+ union {
+ const char *text;
+ uint8_t num[3];
+ };
+ } soft_ver;
uint32_t soft_ver_compat_level;
struct flash_partition_entry partitions[MAX_PARTITIONS+1];
const char *first_sysupgrade_partition;
const char *last_sysupgrade_partition;
};
+#define SOFT_VER_TEXT(_t) {.type = SOFT_VER_TYPE_TEXT, .text = _t}
+#define SOFT_VER_NUMERIC(_maj, _min, _patch) { \
+ .type = SOFT_VER_TYPE_NUMERIC, \
+ .num = {_maj, _min, _patch}}
+#define SOFT_VER_DEFAULT SOFT_VER_NUMERIC(0, 0, 0)
+
struct __attribute__((__packed__)) meta_header {
uint32_t length;
uint32_t zero;
"CPE220(TP-LINK|UN|N300-2):1.1\r\n"
"CPE220(TP-LINK|US|N300-2):1.1\r\n"
"CPE220(TP-LINK|EU|N300-2):1.1\r\n",
- .support_trail = '\xff',
- .soft_ver = NULL,
+ .part_trail = 0xff,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
{"default-mac", 0x30000, 0x00020},
{"product-info", 0x31100, 0x00100},
{"signature", 0x32000, 0x00400},
- {"os-image", 0x40000, 0x300000},
- {"file-system", 0x340000, 0x470000},
+ {"firmware", 0x40000, 0x770000},
{"soft-version", 0x7b0000, 0x00100},
{"support-list", 0x7b1000, 0x00400},
{"user-config", 0x7c0000, 0x10000},
"CPE210(TP-LINK|UN|N300-2):2.0\r\n"
"CPE210(TP-LINK|EU|N300-2):2.0\r\n"
"CPE210(TP-LINK|US|N300-2):2.0\r\n",
- .support_trail = '\xff',
- .soft_ver = NULL,
+ .part_trail = 0xff,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
"CPE210(TP-LINK|EU|N300-2|45550000):3.20\r\n"
"CPE210(TP-LINK|UN|N300-2|00000000):3.20\r\n"
"CPE210(TP-LINK|US|N300-2|55530000):3.20\r\n",
- .support_trail = '\xff',
- .soft_ver = NULL,
+ .part_trail = 0xff,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
"CPE220(TP-LINK|UN|N300-2):2.0\r\n"
"CPE220(TP-LINK|EU|N300-2):2.0\r\n"
"CPE220(TP-LINK|US|N300-2):2.0\r\n",
- .support_trail = '\xff',
- .soft_ver = NULL,
+ .part_trail = 0xff,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
{"default-mac", 0x30000, 0x00020},
{"product-info", 0x31100, 0x00100},
{"signature", 0x32000, 0x00400},
- {"os-image", 0x40000, 0x300000},
- {"file-system", 0x340000, 0x470000},
+ {"firmware", 0x40000, 0x770000},
{"soft-version", 0x7b0000, 0x00100},
{"support-list", 0x7b1000, 0x00400},
{"user-config", 0x7c0000, 0x10000},
"CPE220(TP-LINK|UN|N300-2):3.0\r\n"
"CPE220(TP-LINK|EU|N300-2):3.0\r\n"
"CPE220(TP-LINK|US|N300-2):3.0\r\n",
- .support_trail = '\xff',
- .soft_ver = NULL,
+ .part_trail = 0xff,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
"CPE520(TP-LINK|UN|N300-5):1.1\r\n"
"CPE520(TP-LINK|US|N300-5):1.1\r\n"
"CPE520(TP-LINK|EU|N300-5):1.1\r\n",
- .support_trail = '\xff',
- .soft_ver = NULL,
+ .part_trail = 0xff,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
{"default-mac", 0x30000, 0x00020},
{"product-info", 0x31100, 0x00100},
{"signature", 0x32000, 0x00400},
- {"os-image", 0x40000, 0x300000},
- {"file-system", 0x340000, 0x470000},
+ {"firmware", 0x40000, 0x770000},
{"soft-version", 0x7b0000, 0x00100},
{"support-list", 0x7b1000, 0x00400},
{"user-config", 0x7c0000, 0x10000},
"CPE510(TP-LINK|UN|N300-5):2.0\r\n"
"CPE510(TP-LINK|EU|N300-5):2.0\r\n"
"CPE510(TP-LINK|US|N300-5):2.0\r\n",
- .support_trail = '\xff',
- .soft_ver = NULL,
+ .part_trail = 0xff,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
{"default-mac", 0x30000, 0x00020},
{"product-info", 0x31100, 0x00100},
{"signature", 0x32000, 0x00400},
- {"os-image", 0x40000, 0x300000},
- {"file-system", 0x340000, 0x470000},
+ {"firmware", 0x40000, 0x770000},
{"soft-version", 0x7b0000, 0x00100},
{"support-list", 0x7b1000, 0x00400},
{"user-config", 0x7c0000, 0x10000},
"CPE510(TP-LINK|US|N300-5|55530000):3.0\r\n"
"CPE510(TP-LINK|UN|N300-5):3.0\r\n"
"CPE510(TP-LINK|EU|N300-5):3.0\r\n"
- "CPE510(TP-LINK|US|N300-5):3.0\r\n",
- .support_trail = '\xff',
- .soft_ver = NULL,
+ "CPE510(TP-LINK|US|N300-5):3.0\r\n"
+ "CPE510(TP-LINK|UN|N300-5|00000000):3.20\r\n"
+ "CPE510(TP-LINK|US|N300-5|55530000):3.20\r\n"
+ "CPE510(TP-LINK|EU|N300-5|45550000):3.20\r\n",
+ .part_trail = 0xff,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
{"default-mac", 0x30000, 0x00020},
{"product-info", 0x31100, 0x00100},
{"signature", 0x32000, 0x00400},
- {"os-image", 0x40000, 0x300000},
- {"file-system", 0x340000, 0x470000},
+ {"firmware", 0x40000, 0x770000},
{"soft-version", 0x7b0000, 0x00100},
{"support-list", 0x7b1000, 0x00400},
{"user-config", 0x7c0000, 0x10000},
"CPE610(TP-LINK|UN|N300-5):1.0\r\n"
"CPE610(TP-LINK|EU|N300-5):1.0\r\n"
"CPE610(TP-LINK|US|N300-5):1.0\r\n",
- .support_trail = '\xff',
- .soft_ver = NULL,
+ .part_trail = 0xff,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
{"default-mac", 0x30000, 0x00020},
{"product-info", 0x31100, 0x00100},
{"signature", 0x32000, 0x00400},
- {"os-image", 0x40000, 0x300000},
- {"file-system", 0x340000, 0x470000},
+ {"firmware", 0x40000, 0x770000},
{"soft-version", 0x7b0000, 0x00100},
{"support-list", 0x7b1000, 0x00400},
{"user-config", 0x7c0000, 0x10000},
"CPE610(TP-LINK|UN|N300-5):2.0\r\n"
"CPE610(TP-LINK|EU|N300-5):2.0\r\n"
"CPE610(TP-LINK|US|N300-5):2.0\r\n",
- .support_trail = '\xff',
- .soft_ver = NULL,
+ .part_trail = 0xff,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
{"default-mac", 0x30000, 0x00020},
{"product-info", 0x31100, 0x00100},
{"signature", 0x32000, 0x00400},
- {"os-image", 0x40000, 0x300000},
- {"file-system", 0x340000, 0x470000},
+ {"firmware", 0x40000, 0x770000},
{"soft-version", 0x7b0000, 0x00100},
{"support-list", 0x7b1000, 0x00400},
{"user-config", 0x7c0000, 0x10000},
.first_sysupgrade_partition = "os-image",
.last_sysupgrade_partition = "support-list",
},
+ /** Firmware layout for the CPE710 V1 */
+ {
+ .id = "CPE710V1",
+ .vendor = "CPE710(TP-LINK|UN|AC866-5|00000000):1.0\r\n",
+ .support_list =
+ "SupportList:\r\n"
+ "CPE710(TP-LINK|UN|AC866-5|00000000):1.0\r\n"
+ "CPE710(TP-LINK|EU|AC866-5|45550000):1.0\r\n"
+ "CPE710(TP-LINK|US|AC866-5|55530000):1.0\r\n"
+ "CPE710(TP-LINK|UN|AC866-5):1.0\r\n"
+ "CPE710(TP-LINK|EU|AC866-5):1.0\r\n"
+ "CPE710(TP-LINK|US|AC866-5):1.0\r\n",
+ .part_trail = 0xff,
+ .soft_ver = SOFT_VER_DEFAULT,
+
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x50000},
+ {"partition-table", 0x50000, 0x02000},
+ {"default-mac", 0x60000, 0x00020},
+ {"serial-number", 0x60100, 0x00020},
+ {"product-info", 0x61100, 0x00100},
+ {"device-info", 0x61400, 0x00400},
+ {"signature", 0x62000, 0x00400},
+ {"device-id", 0x63000, 0x00100},
+ {"firmware", 0x70000, 0xf40000},
+ {"soft-version", 0xfb0000, 0x00100},
+ {"support-list", 0xfb1000, 0x01000},
+ {"user-config", 0xfc0000, 0x10000},
+ {"default-config", 0xfd0000, 0x10000},
+ {"log", 0xfe0000, 0x10000},
+ {"radio", 0xff0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "support-list",
+ },
{
.id = "WBS210",
"WBS210(TP-LINK|UN|N300-2):1.20\r\n"
"WBS210(TP-LINK|US|N300-2):1.20\r\n"
"WBS210(TP-LINK|EU|N300-2):1.20\r\n",
- .support_trail = '\xff',
- .soft_ver = NULL,
+ .part_trail = 0xff,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
{"default-mac", 0x30000, 0x00020},
{"product-info", 0x31100, 0x00100},
{"signature", 0x32000, 0x00400},
- {"os-image", 0x40000, 0x300000},
- {"file-system", 0x340000, 0x470000},
+ {"firmware", 0x40000, 0x770000},
{"soft-version", 0x7b0000, 0x00100},
{"support-list", 0x7b1000, 0x00400},
{"user-config", 0x7c0000, 0x10000},
"WBS210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
"WBS210(TP-LINK|US|N300-2|55530000):2.0\r\n"
"WBS210(TP-LINK|EU|N300-2|45550000):2.0\r\n",
- .support_trail = '\xff',
- .soft_ver = NULL,
+ .part_trail = 0xff,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
{"default-mac", 0x30000, 0x00020},
{"product-info", 0x31100, 0x00100},
{"signature", 0x32000, 0x00400},
- {"os-image", 0x40000, 0x300000},
- {"file-system", 0x340000, 0x470000},
+ {"firmware", 0x40000, 0x770000},
{"soft-version", 0x7b0000, 0x00100},
{"support-list", 0x7b1000, 0x00400},
{"user-config", 0x7c0000, 0x10000},
"WBS510(TP-LINK|US|N300-5):1.20\r\n"
"WBS510(TP-LINK|EU|N300-5):1.20\r\n"
"WBS510(TP-LINK|CA|N300-5):1.20\r\n",
- .support_trail = '\xff',
- .soft_ver = NULL,
+ .part_trail = 0xff,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
{"default-mac", 0x30000, 0x00020},
{"product-info", 0x31100, 0x00100},
{"signature", 0x32000, 0x00400},
- {"os-image", 0x40000, 0x300000},
- {"file-system", 0x340000, 0x470000},
+ {"firmware", 0x40000, 0x770000},
{"soft-version", 0x7b0000, 0x00100},
{"support-list", 0x7b1000, 0x00400},
{"user-config", 0x7c0000, 0x10000},
"WBS510(TP-LINK|US|N300-5|55530000):2.0\r\n"
"WBS510(TP-LINK|EU|N300-5|45550000):2.0\r\n"
"WBS510(TP-LINK|CA|N300-5|43410000):2.0\r\n",
- .support_trail = '\xff',
- .soft_ver = NULL,
+ .part_trail = 0xff,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
{"default-mac", 0x30000, 0x00020},
{"product-info", 0x31100, 0x00100},
{"signature", 0x32000, 0x00400},
- {"os-image", 0x40000, 0x300000},
- {"file-system", 0x340000, 0x470000},
+ {"firmware", 0x40000, 0x770000},
{"soft-version", 0x7b0000, 0x00100},
{"support-list", 0x7b1000, 0x00400},
{"user-config", 0x7c0000, 0x10000},
.last_sysupgrade_partition = "support-list",
},
+ /** Firmware layout for the AD7200 */
+ {
+ .id = "AD7200",
+ .vendor = "",
+ .support_list =
+ "SupportList:\r\n"
+ "{product_name:AD7200,product_ver:1.0.0,special_id:00000000}\r\n",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
+
+ .partitions = {
+ {"SBL1", 0x00000, 0x20000},
+ {"MIBIB", 0x20000, 0x20000},
+ {"SBL2", 0x40000, 0x20000},
+ {"SBL3", 0x60000, 0x30000},
+ {"DDRCONFIG", 0x90000, 0x10000},
+ {"SSD", 0xa0000, 0x10000},
+ {"TZ", 0xb0000, 0x30000},
+ {"RPM", 0xe0000, 0x20000},
+ {"fs-uboot", 0x100000, 0x70000},
+ {"uboot-env", 0x170000, 0x40000},
+ {"radio", 0x1b0000, 0x40000},
+ {"os-image", 0x1f0000, 0x400000},
+ {"file-system", 0x5f0000, 0x1900000},
+ {"default-mac", 0x1ef0000, 0x00200},
+ {"pin", 0x1ef0200, 0x00200},
+ {"device-id", 0x1ef0400, 0x00200},
+ {"product-info", 0x1ef0600, 0x0fa00},
+ {"partition-table", 0x1f00000, 0x10000},
+ {"soft-version", 0x1f10000, 0x10000},
+ {"support-list", 0x1f20000, 0x10000},
+ {"profile", 0x1f30000, 0x10000},
+ {"default-config", 0x1f40000, 0x10000},
+ {"user-config", 0x1f50000, 0x40000},
+ {"qos-db", 0x1f90000, 0x40000},
+ {"usb-config", 0x1fd0000, 0x10000},
+ {"log", 0x1fe0000, 0x20000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system"
+ },
+
/** Firmware layout for the C2600 */
{
.id = "C2600",
.support_list =
"SupportList:\r\n"
"{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
/**
We use a bigger os-image partition than the stock images (and thus
"{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
"{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
"{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
- "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n",
- .support_trail = '\x00',
- .soft_ver = "soft_ver:1.0.0\n",
+ "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n"
+ "{product_name:Archer A7,product_ver:5.0.0,special_id:52550000}\n",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_TEXT("soft_ver:1.0.0\n"),
/* We're using a dynamic kernel/rootfs split here */
.partitions = {
"{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
"{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
"{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
- .support_trail = '\x00',
- .soft_ver = "soft_ver:3.0.1\n",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_TEXT("soft_ver:3.0.1\n"),
/** We're using a dynamic kernel/rootfs split here */
"{product_name:ArcherC25,product_ver:1.0.0,special_id:00000000}\n"
"{product_name:ArcherC25,product_ver:1.0.0,special_id:55530000}\n"
"{product_name:ArcherC25,product_ver:1.0.0,special_id:45550000}\n",
- .support_trail = '\x00',
- .soft_ver = "soft_ver:1.0.0\n",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_TEXT("soft_ver:1.0.0\n"),
/* We're using a dynamic kernel/rootfs split here */
.partitions = {
"{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
"{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
"{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
- .support_trail = '\x00',
- .soft_ver = "soft_ver:1.0.0\n",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_TEXT("soft_ver:1.0.0\n"),
.partitions = {
{"fs-uboot", 0x00000, 0x10000},
"{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
"{product_name:Archer C59,product_ver:1.0.0,special_id:52550000}\r\n"
"{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
- .support_trail = '\x00',
- .soft_ver = "soft_ver:1.0.0\n",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_TEXT("soft_ver:1.0.0\n"),
/* We're using a dynamic kernel/rootfs split here */
.partitions = {
"{product_name:Archer C59,product_ver:2.0.0,special_id:00000000}\r\n"
"{product_name:Archer C59,product_ver:2.0.0,special_id:45550000}\r\n"
"{product_name:Archer C59,product_ver:2.0.0,special_id:55530000}\r\n",
- .support_trail = '\x00',
- .soft_ver = "soft_ver:2.0.0 Build 20161206 rel.7303\n",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_TEXT("soft_ver:2.0.0 Build 20161206 rel.7303\n"),
/** We're using a dynamic kernel/rootfs split here */
.partitions = {
"{product_name:Archer C6,product_ver:2.0.0,special_id:45550000}\r\n"
"{product_name:Archer C6,product_ver:2.0.0,special_id:52550000}\r\n"
"{product_name:Archer C6,product_ver:2.0.0,special_id:4A500000}\r\n",
- .support_trail = '\x00',
- .soft_ver = "soft_ver:1.9.1\n",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_TEXT("soft_ver:1.9.1\n"),
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
"{product_name:Archer A6,product_ver:2.0.0,special_id:55530000}\n"
"{product_name:Archer A6,product_ver:2.0.0,special_id:54570000}\n"
"{product_name:Archer C6,product_ver:2.0.0,special_id:55530000}\n",
- .support_trail = '\x00',
- .soft_ver = "soft_ver:1.9.1\n",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_TEXT("soft_ver:1.9.1\n"),
.partitions = {
{"factory-boot", 0x00000, 0x20000},
.first_sysupgrade_partition = "os-image",
.last_sysupgrade_partition = "file-system",
},
+ /** Firmware layout for the Archer C6 v3 */
+ {
+ .id = "ARCHER-C6-V3",
+ .vendor = "",
+ .support_list =
+ "SupportList:\n"
+ "{product_name:Archer C6,product_ver:3.20,special_id:55530000}"
+ "{product_name:Archer C6,product_ver:3.20,special_id:45550000}"
+ "{product_name:Archer C6,product_ver:3.20,special_id:52550000}"
+ "{product_name:Archer C6,product_ver:3.20,special_id:4A500000}"
+ "{product_name:Archer C6,product_ver:3.20,special_id:4B520000}",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_TEXT("soft_ver:1.0.9\n"),
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x40000},
+ {"firmware", 0x40000, 0xf60000},
+ {"default-mac", 0xfa0000, 0x00200},
+ {"pin", 0xfa0200, 0x00100},
+ {"device-id", 0xfa0300, 0x00100},
+ {"product-info", 0xfa0400, 0x0fc00},
+ {"default-config", 0xfb0000, 0x08000},
+ {"ap-def-config", 0xfb8000, 0x08000},
+ {"user-config", 0xfc0000, 0x0a000},
+ {"ag-config", 0xfca000, 0x04000},
+ {"certificate", 0xfce000, 0x02000},
+ {"ap-config", 0xfd0000, 0x06000},
+ {"router-config", 0xfd6000, 0x06000},
+ {"favicon", 0xfdc000, 0x02000},
+ {"logo", 0xfde000, 0x02000},
+ {"partition-table", 0xfe0000, 0x00800},
+ {"soft-version", 0xfe0800, 0x00100},
+ {"support-list", 0xfe0900, 0x00200},
+ {"profile", 0xfe0b00, 0x03000},
+ {"extra-para", 0xfe3b00, 0x00100},
+ {"radio", 0xff0000, 0x10000},
+ {NULL, 0, 0}
+ },
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system",
+ },
+ /** Firmware layout for the Archer A6 v3 */
+ {
+ .id = "ARCHER-A6-V3",
+ .vendor = "",
+ .support_list =
+ "SupportList:\n"
+ "{product_name:Archer A6,product_ver:3.0.0,special_id:43410000}\n"
+ "{product_name:Archer A6,product_ver:3.0.0,special_id:55530000}\n"
+ "{product_name:Archer A6,product_ver:3.0.0,special_id:54570000}\n",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_TEXT("soft_ver:1.0.5\n"),
+
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x40000},
+ {"firmware", 0x40000, 0xf60000},
+ {"default-mac", 0xfa0000, 0x00200},
+ {"pin", 0xfa0200, 0x00100},
+ {"device-id", 0xfa0300, 0x00100},
+ {"product-info", 0xfa0400, 0x0fc00},
+ {"default-config", 0xfb0000, 0x08000},
+ {"ap-def-config", 0xfb8000, 0x08000},
+ {"user-config", 0xfc0000, 0x0a000},
+ {"ag-config", 0xfca000, 0x04000},
+ {"certificate", 0xfce000, 0x02000},
+ {"ap-config", 0xfd0000, 0x06000},
+ {"router-config", 0xfd6000, 0x06000},
+ {"favicon", 0xfdc000, 0x02000},
+ {"logo", 0xfde000, 0x02000},
+ {"partition-table", 0xfe0000, 0x00800},
+ {"soft-version", 0xfe0800, 0x00100},
+ {"support-list", 0xfe0900, 0x00200},
+ {"profile", 0xfe0b00, 0x03000},
+ {"extra-para", 0xfe3b00, 0x00100},
+ {"radio", 0xff0000, 0x10000},
+ {NULL, 0, 0}
+ },
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system",
+ },
+ /** Firmware layout for the Archer C6U v1 */
+ {
+ .id = "ARCHER-C6U-V1",
+ .vendor = "",
+ .support_list =
+ "SupportList:\n"
+ "{product_name:Archer C6U,product_ver:1.0.0,special_id:45550000}\n",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_TEXT("soft_ver:1.0.2\n"),
+
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x40000},
+ {"firmware", 0x40000, 0xf60000},
+ {"default-mac", 0xfa0000, 0x00200},
+ {"pin", 0xfa0200, 0x00100},
+ {"device-id", 0xfa0300, 0x00100},
+ {"product-info", 0xfa0400, 0x0fc00},
+ {"default-config", 0xfb0000, 0x08000},
+ {"ap-def-config", 0xfb8000, 0x08000},
+ {"user-config", 0xfc0000, 0x0c000},
+ {"certificate", 0xfcc000, 0x04000},
+ {"ap-config", 0xfd0000, 0x08000},
+ {"router-config", 0xfd8000, 0x08000},
+ {"partition-table", 0xfe0000, 0x00800},
+ {"soft-version", 0xfe0800, 0x00100},
+ {"support-list", 0xfe0900, 0x00200},
+ {"profile", 0xfe0b00, 0x03000},
+ {"extra-para", 0xfe3b00, 0x00100},
+ {"radio", 0xff0000, 0x10000},
+ {NULL, 0, 0}
+ },
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system",
+ },
/** Firmware layout for the C60v1 */
{
.id = "ARCHER-C60-V1",
"{product_name:Archer C60,product_ver:1.0.0,special_id:00000000}\r\n"
"{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
"{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
- .support_trail = '\x00',
- .soft_ver = "soft_ver:1.0.0\n",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_TEXT("soft_ver:1.0.0\n"),
.partitions = {
{"fs-uboot", 0x00000, 0x10000},
"{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n"
"{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n"
"{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n",
- .support_trail = '\x00',
- .soft_ver = "soft_ver:2.0.0\n",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_TEXT("soft_ver:2.0.0\n"),
.partitions = {
{"factory-boot", 0x00000, 0x1fb00},
"{product_name:Archer C60,product_ver:3.0.0,special_id:42520000}\r\n"
"{product_name:Archer C60,product_ver:3.0.0,special_id:45550000}\r\n"
"{product_name:Archer C60,product_ver:3.0.0,special_id:55530000}\r\n",
- .support_trail = '\x00',
- .soft_ver = "soft_ver:3.0.0\n",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_TEXT("soft_ver:3.0.0\n"),
.partitions = {
{"factory-boot", 0x00000, 0x1fb00},
"{product_name:ArcherC5,product_ver:2.0.0,special_id:00000000}\r\n"
"{product_name:ArcherC5,product_ver:2.0.0,special_id:55530000}\r\n"
"{product_name:ArcherC5,product_ver:2.0.0,special_id:4A500000}\r\n", /* JP version */
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x40000},
"{product_name:Archer C7,product_ver:4.0.0,special_id:54570000}\n"
"{product_name:Archer C7,product_ver:4.0.0,special_id:55530000}\n"
"{product_name:Archer C7,product_ver:4.0.0,special_id:43410000}\n",
- .support_trail = '\x00',
- .soft_ver = "soft_ver:1.0.0\n",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_TEXT("soft_ver:1.0.0\n"),
/* We're using a dynamic kernel/rootfs split here */
.partitions = {
"{product_name:Archer C7,product_ver:5.0.0,special_id:52550000}\n"
"{product_name:Archer C7,product_ver:5.0.0,special_id:4B520000}\n",
- .support_trail = '\x00',
- .soft_ver = "soft_ver:1.0.0\n",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_TEXT("soft_ver:7.0.0\n"),
/* We're using a dynamic kernel/rootfs split here */
.partitions = {
"{product_name:ArcherC9,"
"product_ver:1.0.0,"
"special_id:00000000}\n",
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x40000},
.support_list =
"SupportList:\r\n"
"EAP120(TP-LINK|UN|N300-2):1.0\r\n",
- .support_trail = '\xff',
- .soft_ver = NULL,
+ .part_trail = 0xff,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
.support_list =
"SupportList:\r\n"
"EAP225-Outdoor(TP-Link|UN|AC1200-D):1.0\r\n",
- .support_trail = '\xff',
- .soft_ver = NULL,
+ .part_trail = PART_TRAIL_NONE,
+ .soft_ver = SOFT_VER_DEFAULT,
.soft_ver_compat_level = 1,
.partitions = {
.support_list =
"SupportList:\r\n"
"EAP225(TP-Link|UN|AC1350-D):3.0\r\n",
- .support_trail = '\xff',
- .soft_ver = NULL,
+ .part_trail = PART_TRAIL_NONE,
+ .soft_ver = SOFT_VER_DEFAULT,
.soft_ver_compat_level = 1,
.partitions = {
.support_list =
"SupportList:\r\n"
"EAP225-Wall(TP-Link|UN|AC1200-D):2.0\r\n",
- .support_trail = '\xff',
- .soft_ver = NULL,
+ .part_trail = PART_TRAIL_NONE,
+ .soft_ver = SOFT_VER_DEFAULT,
.soft_ver_compat_level = 1,
.partitions = {
.last_sysupgrade_partition = "file-system"
},
+ /** Firmware layout for the EAP235-Wall v1 */
+ {
+ .id = "EAP235-WALL-V1",
+ .support_list =
+ "SupportList:\r\n"
+ "EAP235-Wall(TP-Link|UN|AC1200-D):1.0\r\n",
+ .part_trail = PART_TRAIL_NONE,
+ .soft_ver = SOFT_VER_NUMERIC(3, 0, 0),
+ .soft_ver_compat_level = 1,
+
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x80000},
+ {"partition-table", 0x80000, 0x02000},
+ {"default-mac", 0x90000, 0x01000},
+ {"support-list", 0x91000, 0x00100},
+ {"product-info", 0x91100, 0x00400},
+ {"soft-version", 0x92000, 0x00100},
+ {"firmware", 0xa0000, 0xd20000},
+ {"user-config", 0xdc0000, 0x30000},
+ {"mutil-log", 0xf30000, 0x80000},
+ {"oops", 0xfb0000, 0x40000},
+ {"radio", 0xff0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system"
+ },
+
/** Firmware layout for the EAP245 v1 */
{
.id = "EAP245-V1",
.support_list =
"SupportList:\r\n"
"EAP245(TP-LINK|UN|AC1750-D):1.0\r\n",
- .support_trail = '\xff',
- .soft_ver = NULL,
+ .part_trail = PART_TRAIL_NONE,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
.support_list =
"SupportList:\r\n"
"EAP245(TP-Link|UN|AC1750-D):3.0\r\n",
- .support_trail = '\xff',
- .soft_ver = NULL,
+ .part_trail = PART_TRAIL_NONE,
+ .soft_ver = SOFT_VER_DEFAULT,
.soft_ver_compat_level = 1,
/** Firmware partition with dynamic kernel/rootfs split */
.last_sysupgrade_partition = "file-system"
},
+ /** Firmware layout for the TL-WA1201 v2 */
+ {
+ .id = "TL-WA1201-V2",
+ .vendor = "",
+ .support_list =
+ "SupportList:\n"
+ "{product_name:TL-WA1201,product_ver:2.0.0,special_id:45550000}\n"
+ "{product_name:TL-WA1201,product_ver:2.0.0,special_id:55530000}\n",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_TEXT("soft_ver:1.0.1 Build 20200709 rel.66244\n"),
+
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x20000},
+ {"default-mac", 0x20000, 0x00200},
+ {"pin", 0x20200, 0x00100},
+ {"product-info", 0x20300, 0x00200},
+ {"device-id", 0x20500, 0x0fb00},
+ {"firmware", 0x30000, 0xce0000},
+ {"portal-logo", 0xd10000, 0x20000},
+ {"portal-back", 0xd30000, 0x200000},
+ {"soft-version", 0xf30000, 0x00200},
+ {"extra-para", 0xf30200, 0x00200},
+ {"support-list", 0xf30400, 0x00200},
+ {"profile", 0xf30600, 0x0fa00},
+ {"apdef-config", 0xf40000, 0x10000},
+ {"ap-config", 0xf50000, 0x10000},
+ {"redef-config", 0xf60000, 0x10000},
+ {"re-config", 0xf70000, 0x10000},
+ {"multidef-config", 0xf80000, 0x10000},
+ {"multi-config", 0xf90000, 0x10000},
+ {"clientdef-config", 0xfa0000, 0x10000},
+ {"client-config", 0xfb0000, 0x10000},
+ {"partition-table", 0xfc0000, 0x10000},
+ {"user-config", 0xfd0000, 0x10000},
+ {"certificate", 0xfe0000, 0x10000},
+ {"radio", 0xff0000, 0x10000},
+ {NULL, 0, 0}
+ },
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system",
+ },
+
/** Firmware layout for the TL-WA850RE v2 */
{
.id = "TLWA850REV2",
"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
/**
576KB were moved from file-system to os-image
"{product_name:TL-WA855RE,product_ver:1.0.0,special_id:43410000}\n"
"{product_name:TL-WA855RE,product_ver:1.0.0,special_id:41550000}\n"
"{product_name:TL-WA855RE,product_ver:1.0.0,special_id:52550000}\n",
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
.support_list =
"SupportList:\n"
"{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:45550000}\n",
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"factory-uboot", 0x00000, 0x20000},
"{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:41550000}\n"
"{product_name:TL-WPA8630P,product_ver:2.0.0,special_id:44450000}\n"
"{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:41550000}\n",
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"factory-uboot", 0x00000, 0x20000},
.support_list =
"SupportList:\n"
"{product_name:TL-WPA8630P,product_ver:2.1.0,special_id:45550000}\n",
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"factory-uboot", 0x00000, 0x20000},
"SupportList:\n"
"{product_name:TL-WR1043N,product_ver:5.0.0,special_id:45550000}\n"
"{product_name:TL-WR1043N,product_ver:5.0.0,special_id:55530000}\n",
- .support_trail = '\x00',
- .soft_ver = "soft_ver:1.0.0\n",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_TEXT("soft_ver:1.0.0\n"),
.partitions = {
{"factory-boot", 0x00000, 0x20000},
{"fs-uboot", 0x20000, 0x20000},
.support_list =
"SupportList:\n"
"{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
/* We're using a dynamic kernel/rootfs split here */
.partitions = {
"SupportList:\n"
"{product_name:TL-WR902AC,product_ver:1.0.0,special_id:45550000}\n"
"{product_name:TL-WR902AC,product_ver:1.0.0,special_id:55530000}\n",
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
/**
384KB were moved from file-system to os-image
.last_sysupgrade_partition = "file-system",
},
+ /** Firmware layout for the TL-WR941HP v1 */
+ {
+ .id = "TL-WR941HP-V1",
+ .vendor = "",
+ .support_list =
+ "SupportList:\n"
+ "{product_name:TL-WR941HP,product_ver:1.0.0,special_id:00000000}\n",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
+
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x20000},
+ {"firmware", 0x20000, 0x730000},
+ {"default-mac", 0x750000, 0x00200},
+ {"pin", 0x750200, 0x00200},
+ {"product-info", 0x750400, 0x0fc00},
+ {"soft-version", 0x760000, 0x0b000},
+ {"support-list", 0x76b000, 0x04000},
+ {"profile", 0x770000, 0x04000},
+ {"default-config", 0x774000, 0x0b000},
+ {"user-config", 0x780000, 0x40000},
+ {"partition-table", 0x7c0000, 0x10000},
+ {"log", 0x7d0000, 0x20000},
+ {"radio", 0x7f0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system",
+ },
+
/** Firmware layout for the TL-WR942N V1 */
{
.id = "TLWR942NV1",
"SupportList:\r\n"
"{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
"{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
"{product_name:RE200,product_ver:2.0.0,special_id:52550000}\n"
"{product_name:RE200,product_ver:2.0.0,special_id:54570000}\n"
"{product_name:RE200,product_ver:2.0.0,special_id:55530000}\n",
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
"{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n"
"{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n"
"{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n",
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
"{product_name:RE200,product_ver:4.0.0,special_id:45530000}\n"
"{product_name:RE200,product_ver:4.0.0,special_id:49440000}\n"
"{product_name:RE200,product_ver:4.0.0,special_id:45470000}\n",
- .support_trail = '\x00',
- .soft_ver = "soft_ver:1.1.0\n",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_TEXT("soft_ver:1.1.0\n"),
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
"{product_name:RE220,product_ver:2.0.0,special_id:52550000}\n"
"{product_name:RE220,product_ver:2.0.0,special_id:54570000}\n"
"{product_name:RE220,product_ver:2.0.0,special_id:55530000}\n",
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
"{product_name:RE305,product_ver:1.0.0,special_id:4b520000}\n"
"{product_name:RE305,product_ver:1.0.0,special_id:41550000}\n"
"{product_name:RE305,product_ver:1.0.0,special_id:43410000}\n",
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
"{product_name:RE350,product_ver:1.0.0,special_id:43410000}\n"
"{product_name:RE350,product_ver:1.0.0,special_id:4b520000}\n"
"{product_name:RE350,product_ver:1.0.0,special_id:4a500000}\n",
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
/** We're using a dynamic kernel/rootfs split here */
.partitions = {
.support_list =
"SupportList:\n"
"{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
/** We're using a dynamic kernel/rootfs split here */
.partitions = {
"{product_name:RE355,product_ver:1.0.0,special_id:41550000}\r\n"
"{product_name:RE355,product_ver:1.0.0,special_id:4B520000}\r\n"
"{product_name:RE355,product_ver:1.0.0,special_id:55534100}\r\n",
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
/* We're using a dynamic kernel/rootfs split here */
.partitions = {
"{product_name:RE450,product_ver:1.0.0,special_id:41550000}\r\n"
"{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
"{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
/** We're using a dynamic kernel/rootfs split here */
.partitions = {
"{product_name:RE450,product_ver:2.0.0,special_id:41530000}\r\n"
"{product_name:RE450,product_ver:2.0.0,special_id:4B520000}\r\n"
"{product_name:RE450,product_ver:2.0.0,special_id:42520000}\r\n",
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
/* We're using a dynamic kernel/rootfs split here */
.partitions = {
"{product_name:RE450,product_ver:3.0.0,special_id:41530000}\r\n"
"{product_name:RE450,product_ver:3.0.0,special_id:4B520000}\r\n"
"{product_name:RE450,product_ver:3.0.0,special_id:42520000}\r\n",
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
+
+ /* We're using a dynamic kernel/rootfs split here */
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x20000},
+ {"default-mac", 0x20000, 0x00020},
+ {"pin", 0x20020, 0x00020},
+ {"product-info", 0x21000, 0x01000},
+ {"partition-table", 0x22000, 0x02000},
+ {"soft-version", 0x24000, 0x01000},
+ {"support-list", 0x25000, 0x01000},
+ {"profile", 0x26000, 0x08000},
+ {"user-config", 0x2e000, 0x10000},
+ {"default-config", 0x3e000, 0x10000},
+ {"config-info", 0x4e000, 0x00400},
+ {"firmware", 0x50000, 0x7a0000},
+ {"radio", 0x7f0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system"
+ },
+
+ /** Firmware layout for the RE455 v1 */
+ {
+ .id = "RE455-V1",
+ .vendor = "",
+ .support_list =
+ "SupportList:\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:00000000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:55530000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:45550000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:4A500000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:43410000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:41550000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:41530000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:4B520000}\r\n"
+ "{product_name:RE455,product_ver:1.0.0,special_id:42520000}\r\n",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
/* We're using a dynamic kernel/rootfs split here */
.partitions = {
"{product_name:RE500,product_ver:1.0.0,special_id:43410000}\r\n"
"{product_name:RE500,product_ver:1.0.0,special_id:41550000}\r\n"
"{product_name:RE500,product_ver:1.0.0,special_id:41530000}\r\n",
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
/* We're using a dynamic kernel/rootfs split here */
.partitions = {
"{product_name:RE650,product_ver:1.0.0,special_id:43410000}\r\n"
"{product_name:RE650,product_ver:1.0.0,special_id:41550000}\r\n"
"{product_name:RE650,product_ver:1.0.0,special_id:41530000}\r\n",
- .support_trail = '\x00',
- .soft_ver = NULL,
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_DEFAULT,
/* We're using a dynamic kernel/rootfs split here */
.partitions = {
buf[3] = val;
}
+static inline bool meta_partition_should_pad(enum partition_trail_value pv)
+{
+ return (pv >= 0) && (pv <= PART_TRAIL_MAX);
+}
+
/** Allocate a padded meta partition with a correctly initialised header
* If the `data` pointer is NULL, then the required space is only allocated,
* otherwise `data_len` bytes will be copied from `data` into the partition
* entry. */
static struct image_partition_entry init_meta_partition_entry(
const char *name, const void *data, uint32_t data_len,
- uint8_t pad_value)
+ enum partition_trail_value pad_value)
{
- uint32_t total_len = sizeof(struct meta_header) + data_len + 1;
+ uint32_t total_len = sizeof(struct meta_header) + data_len;
+ if (meta_partition_should_pad(pad_value))
+ total_len += 1;
+
struct image_partition_entry entry = {
.name = name,
.size = total_len,
if (data)
memcpy(entry.data+sizeof(*header), data, data_len);
- entry.data[total_len - 1] = pad_value;
+ if (meta_partition_should_pad(pad_value))
+ entry.data[total_len - 1] = (uint8_t) pad_value;
return entry;
}
{
/** If an info string is provided, use this instead of
* the structured data, and include the null-termination */
- if (info->soft_ver) {
- uint32_t len = strlen(info->soft_ver) + 1;
+ if (info->soft_ver.type == SOFT_VER_TYPE_TEXT) {
+ uint32_t len = strlen(info->soft_ver.text) + 1;
return init_meta_partition_entry("soft-version",
- info->soft_ver, len, 0);
+ info->soft_ver.text, len, info->part_trail);
}
time_t t;
struct soft_version s = {
.pad1 = 0xff,
- .version_major = 0,
- .version_minor = 0,
- .version_patch = 0,
+ .version_major = info->soft_ver.num[0],
+ .version_minor = info->soft_ver.num[1],
+ .version_patch = info->soft_ver.num[2],
.year_hi = bcd((1900+tm->tm_year)/100),
.year_lo = bcd(tm->tm_year%100),
.month = bcd(tm->tm_mon+1),
.day = bcd(tm->tm_mday),
+ .rev = htonl(rev),
.compat_level = htonl(info->soft_ver_compat_level)
};
if (info->soft_ver_compat_level == 0)
return init_meta_partition_entry("soft-version", &s,
- (uint8_t *)(&s.compat_level) - (uint8_t *)(&s), 0xff);
+ (uint8_t *)(&s.compat_level) - (uint8_t *)(&s),
+ info->part_trail);
else
return init_meta_partition_entry("soft-version", &s,
- sizeof(s), 0xff);
+ sizeof(s), info->part_trail);
}
/** Generates the support-list partition */
{
uint32_t len = strlen(info->support_list);
return init_meta_partition_entry("support-list", info->support_list,
- len, info->support_trail);
+ len, info->part_trail);
}
/** Partition with extra-para data */
static struct image_partition_entry make_extra_para(
const struct device_info *info, const uint8_t *extra_para, size_t len)
{
- return init_meta_partition_entry("extra-para", extra_para, len, 0x00);
+ return init_meta_partition_entry("extra-para", extra_para, len,
+ info->part_trail);
}
/** Creates a new image partition with an arbitrary name from a file */
parts[4] = read_file("file-system", rootfs_image, add_jffs2_eof, file_system_partition);
/* Some devices need the extra-para partition to accept the firmware */
- if (strcasecmp(info->id, "ARCHER-A7-V5") == 0 ||
+ if (strcasecmp(info->id, "ARCHER-A6-V3") == 0 ||
+ strcasecmp(info->id, "ARCHER-A7-V5") == 0 ||
strcasecmp(info->id, "ARCHER-C2-V3") == 0 ||
strcasecmp(info->id, "ARCHER-C7-V4") == 0 ||
strcasecmp(info->id, "ARCHER-C7-V5") == 0 ||
strcasecmp(info->id, "ARCHER-C59-V2") == 0 ||
strcasecmp(info->id, "ARCHER-C60-V2") == 0 ||
strcasecmp(info->id, "ARCHER-C60-V3") == 0 ||
+ strcasecmp(info->id, "ARCHER-C6U-V1") == 0 ||
+ strcasecmp(info->id, "ARCHER-C6-V3") == 0 ||
strcasecmp(info->id, "TLWR1043NV5") == 0) {
const uint8_t extra_para[2] = {0x01, 0x00};
parts[5] = make_extra_para(info, extra_para,
sizeof(extra_para));
- } else if (strcasecmp(info->id, "ARCHER-C6-V2") == 0) {
+ } else if (strcasecmp(info->id, "ARCHER-C6-V2") == 0 ||
+ strcasecmp(info->id, "TL-WA1201-V2") == 0) {
const uint8_t extra_para[2] = {0x00, 0x01};
parts[5] = make_extra_para(info, extra_para,
sizeof(extra_para));
"Options:\n"
" -h show this help\n"
"\n"
+ "Info about an image:\n"
+ " -i <file> input file to read from\n"
"Create a new image:\n"
" -B <board> create image for the board specified with <board>\n"
" -k <file> read kernel image from the file <file>\n"
return entries;
}
- error(1, 0, "%s", error_msg);
+ if (error_msg) {
+ error(1, 0, "%s", error_msg);
+ }
+
return NULL;
}
+static int firmware_info(const char *input)
+{
+ struct flash_partition_entry pointers[MAX_PARTITIONS] = { };
+ struct flash_partition_entry *e;
+ FILE *fp;
+ int i;
+
+ fp = fopen(input, "r");
+
+ if (read_partition_table(fp, 0x1014, pointers, MAX_PARTITIONS, 0)) {
+ error(1, 0, "Error can not read the partition table (fwup-ptn)");
+ }
+
+ printf("Firmware image partitions:\n");
+ printf("%-8s %-8s %s\n", "base", "size", "name");
+ for (i = 0; i < MAX_PARTITIONS; i++) {
+ e = &pointers[i];
+
+ if (!e->name && !e->base && !e->size)
+ continue;
+
+ printf("%08x %08x %s\n", e->base, e->size, e->name ? e->name : "");
+ }
+
+ e = find_partition(pointers, MAX_PARTITIONS, "soft-version", NULL);
+ if (e) {
+ size_t data_len = e->size - sizeof(struct meta_header);
+ char *buf = malloc(data_len);
+ struct soft_version *s;
+ bool isstr;
+ int i;
+
+ if (!buf)
+ error(1, errno, "Failed to alloc buffer");
+
+ if (fseek(fp, 0x1014 + e->base + sizeof(struct meta_header), SEEK_SET))
+ error(1, errno, "Can not seek in the firmware");
+
+ if (fread(buf, data_len, 1, fp) != 1)
+ error(1, errno, "Can not read fwup-ptn data from the firmware");
+
+ /* Check for string ignoring padding character */
+ isstr = true;
+ for (i = 0; i < data_len - 1; i++) {
+ if (!isascii(buf[i])) {
+ isstr = false;
+ break;
+ }
+ }
+
+ printf("\n[Software version]\n");
+ if (isstr) {
+ fwrite(buf, data_len, 1, stdout);
+ putchar('\n');
+ } else if (data_len >= offsetof(struct soft_version, rev)) {
+ s = (struct soft_version *)buf;
+
+ printf("Version: %d.%d.%d\n", s->version_major, s->version_minor, s->version_patch);
+ printf("Date: %02x%02x-%02x-%02x\n", s->year_hi, s->year_lo, s->month, s->day);
+ printf("Revision: %d\n", ntohl(s->rev));
+ } else {
+ printf("Failed to parse data\n");
+ }
+
+ free(buf);
+ }
+
+ e = find_partition(pointers, MAX_PARTITIONS, "support-list", NULL);
+ if (e) {
+ char buf[128];
+ size_t length;
+ size_t bytes;
+
+ if (fseek(fp, 0x1014 + e->base + sizeof(struct meta_header), SEEK_SET))
+ error(1, errno, "Can not seek in the firmware");
+
+ printf("\n[Support list]\n");
+ for (length = e->size - sizeof(struct meta_header); length; length -= bytes) {
+ bytes = fread(buf, 1, length > sizeof(buf) ? sizeof(buf) : length, fp);
+ if (bytes <= 0)
+ error(1, errno, "Can not read fwup-ptn data from the firmware");
+
+ puts(buf);
+ }
+ }
+
+ e = find_partition(pointers, MAX_PARTITIONS, "partition-table", NULL);
+ if (e) {
+ struct flash_partition_entry parts[MAX_PARTITIONS] = { };
+
+ if (read_partition_table(fp, 0x1014 + e->base + 4, parts, MAX_PARTITIONS, 1)) {
+ error(1, 0, "Error can not read the partition table (partition)");
+ }
+
+ printf("\n[Partition table]\n");
+ printf("%-8s %-8s %s\n", "base", "size", "name");
+ for (i = 0; i < MAX_PARTITIONS; i++) {
+ e = &parts[i];
+
+ if (!e->name && !e->base && !e->size)
+ continue;
+
+ printf("%08x %08x %s\n", e->base, e->size, e->name ? e->name : "");
+ }
+ }
+
+ fclose(fp);
+
+ return 0;
+}
+
static void write_ff(FILE *output_file, size_t size)
{
char buf[4096];
}
int main(int argc, char *argv[]) {
- const char *board = NULL, *kernel_image = NULL, *rootfs_image = NULL, *output = NULL;
+ const char *info_image = NULL, *board = NULL, *kernel_image = NULL, *rootfs_image = NULL, *output = NULL;
const char *extract_image = NULL, *output_directory = NULL, *convert_image = NULL;
bool add_jffs2_eof = false, sysupgrade = false;
unsigned rev = 0;
while (true) {
int c;
- c = getopt(argc, argv, "B:k:r:o:V:jSh:x:d:z:");
+ c = getopt(argc, argv, "i:B:k:r:o:V:jSh:x:d:z:");
if (c == -1)
break;
switch (c) {
+ case 'i':
+ info_image = optarg;
+ break;
+
case 'B':
board = optarg;
break;
}
}
- if (extract_image || output_directory) {
+ if (info_image) {
+ firmware_info(info_image);
+ } else if (extract_image || output_directory) {
if (!extract_image)
error(1, 0, "No factory/oem image given via -x <file>. Output directory is only valid with -x");
if (!output_directory)
projects / openwrt / staging / mkresin.git / blobdiff