ramips: add support for MTS WG430223

[openwrt/openwrt.git] / target / linux / ramips / mt7621 / base-files / etc / hotplug.d / ieee80211 / 10_fix_wifi_mac

diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index b7a41f038c537f15c0d92eb0960c5f51b0f5e892..3390104e8088efd80cba844f5876d104b2793d71 100644 (file)
--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -10,11 +10,93 @@ PHYNBR=${DEVPATH##*/phy}
 board=$(board_name)
 
 case "$board" in
+       beeline,smartbox-flash|\
+       mts,wg430223)
+               hw_mac_addr_ra0="$(mtd_get_mac_ascii u-boot-env ra0macaddr)"
+               hw_mac_addr_rax0="$(mtd_get_mac_ascii u-boot-env rax0macaddr)"
+               [ "$PHYNBR" = "0" ] && echo -n $hw_mac_addr_ra0 > /sys${DEVPATH}/macaddress
+               [ "$PHYNBR" = "1" ] && echo -n $hw_mac_addr_rax0 > /sys${DEVPATH}/macaddress
+               ;;
+       cudy,x6)
+               hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
+               macaddr_add $hw_mac_addr "$PHYNBR" > /sys${DEVPATH}/macaddress
+               ;;
+       dlink,dir-853-a3)
+               [ "$PHYNBR" = "0" ] && \
+                       macaddr_setbit_la "$(mtd_get_mac_binary factory 0xe000)" \
+                               > /sys${DEVPATH}/macaddress
+               ;;
+       dlink,dir-853-r1|\
+       phicomm,k2p)
+               if [ "$PHYNBR" = "0" ]; then
+                       base_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" -1)
+                       macaddr_setbit_la "$base_mac" > /sys${DEVPATH}/macaddress
+               fi
+               ;;
+       glinet,gl-mt1300)
+               [ "$PHYNBR" = "1" ] && \
+                       macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1 > /sys${DEVPATH}/macaddress
+               ;;
+       hiwifi,hc5962)
+               label_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ")
+               [ "$PHYNBR" = "0" ] && [ -n "$label_mac" ] && \
+               echo -n "$label_mac" > /sys${DEVPATH}/macaddress
+               [ "$PHYNBR" = "1" ] && [ -n "$label_mac" ] && \
+               macaddr_unsetbit "$label_mac" 6 > /sys${DEVPATH}/macaddress
+               ;;
+       iptime,a3002mesh|\
+       iptime,a3004t)
+               hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
+               [ "$PHYNBR" = "0" ] && \
+                       macaddr_setbit_la "$(macaddr_add $hw_mac_addr 3)" > /sys${DEVPATH}/macaddress
+               [ "$PHYNBR" = "1" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
+               ;;
+       iptime,ax2004m)
+               if [ "$PHYNBR" = "1" ]; then
+                       hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
+                       macaddr_setbit_la "$(macaddr_add $hw_mac_addr 3)" > /sys${DEVPATH}/macaddress
+               fi
+               ;;
+       jcg,q20)
+               [ "$PHYNBR" = "1" ] && \
+                       macaddr_setbit_la "$(mtd_get_mac_binary Factory 0x4)" > /sys${DEVPATH}/macaddress
+               ;;
+       jcg,y2)
+               [ "$PHYNBR" = "1" ] && \
+                       macaddr_setbit_la "$(mtd_get_mac_binary factory 0x4)" > /sys${DEVPATH}/macaddress
+               ;;
+       linksys,e5600|\
+       linksys,ea6350-v4|\
        linksys,ea7300-v1|\
        linksys,ea7300-v2|\
-       linksys,ea7500-v2)
+       linksys,ea7500-v2|\
+       linksys,ea8100-v1|\
+       linksys,ea8100-v2)
                hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
                [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
                [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
                ;;
+       oraybox,x3a)
+               if [ "$PHYNBR" = "1" ]; then
+                       hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
+                       macaddr_setbit_la "$(macaddr_add $hw_mac_addr 0x100000)" > /sys${DEVPATH}/macaddress
+               fi
+               ;;
+       raisecom,msg1500-x-00)
+               [ "$PHYNBR" = "0" ] && \
+                       macaddr_setbit_la "$(mtd_get_mac_ascii Config protest_lan_mac)" \
+                               > /sys${DEVPATH}/macaddress
+               ;;
+       tenbay,t-mb5eu-v01)
+               hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
+               [ "$PHYNBR" = "1" ] &&  macaddr_add $hw_mac_addr "0x100000" > /sys${DEVPATH}/macaddress
+               ;;
+       tplink,eap615-wall-v1)
+               hw_mac_addr="$(mtd_get_mac_binary product-info 0x8)"
+               macaddr_add "$hw_mac_addr" "$PHYNBR" > "/sys${DEVPATH}/macaddress"
+               ;;
+       yuncore,ax820)
+               [ "$PHYNBR" = "1" ] && \
+                       macaddr_setbit_la "$(mtd_get_mac_binary Factory 0xe000)" > /sys${DEVPATH}/macaddress
+               ;;
 esac