ramips: add support for Z-ROUTER ZR-2660

[openwrt/staging/stintel.git] / target / linux / ramips / mt7621 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index b4c2c6dd68a87e297cf1fba1b3c5624e58440887..d932313cf1686da4066d6ff9f1bb695cb21774b2 100644 (file)
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -26,6 +26,7 @@ ramips_setup_interfaces()
        xiaomi,mi-router-cr6608|\
        xiaomi,mi-router-cr6609|\
        xiaomi,redmi-router-ac2100|\
+       z-router,zr-2660|\
        zyxel,wsm20)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
                ;;
@@ -98,6 +99,9 @@ ramips_setup_interfaces()
        zyxel,nr7101)
                ucidef_set_interfaces_lan_wan "lan" "wan"
                ;;
+       dlink,covr-x1860-a1)
+               ucidef_set_interfaces_lan_wan "ethernet" "internet"
+               ;;
        gnubee,gb-pc1)
                ucidef_set_interface_lan "ethblack ethblue"
                ;;
@@ -148,12 +152,17 @@ ramips_setup_interfaces()
        ubnt,usw-flex)
                ucidef_set_interface_lan "lan1 lan2 lan3 lan4 lan5"
                ;;
+       zyxel,lte5398-m904)
+               ucidef_set_interface_lan "lan1 lan2"
+               ucidef_set_interface "wan" device "/dev/cdc-wdm0" protocol "qmi"
+               ;;
        zyxel,wap6805)
                ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
                ucidef_set_interface "qtn" ifname "eth1" protocol "static" ipaddr "1.1.1.1" netmask "255.255.255.0"
                ;;
        comfast,cf-e390ax|\
-       comfast,cf-ew72-v2)
+       comfast,cf-ew72-v2|\
+       meig,slt866)
                ucidef_set_interfaces_lan_wan "lan" "wan"
                ;;
        *)
@@ -214,6 +223,11 @@ ramips_setup_macs()
                label_mac=$lan_mac
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
+       dlink,covr-x1860-a1)
+               label_mac=$(mtd_get_mac_ascii config2 factory_mac)
+               wan_mac=$(macaddr_add "$label_mac" 3)
+               lan_mac=$label_mac
+               ;;
        dlink,dir-860l-b1)
                lan_mac=$(mtd_get_mac_ascii factory lanmac)
                wan_mac=$(mtd_get_mac_ascii factory wanmac)
@@ -247,7 +261,7 @@ ramips_setup_macs()
                label_mac=$wan_mac
                ;;
        iptime,t5004)
-               lan_mac=$(mtd_get_mac_ascii config ethaddr)
+               lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
        linksys,e5600|\