ramips: add basic support for TP-Link EC330-G5u v1

[openwrt/openwrt.git] / target / linux / ramips / mt7621 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 39af3af2197900a7b9e084e62ebe6d46b2434d70..c5196c14484cb35ba2a14cbdf9d929d4ff672fc2 100644 (file)
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -11,7 +11,9 @@ ramips_setup_interfaces()
        ampedwireless,ally-00x19k|\
        asus,rp-ac56|\
        asus,rp-ac87|\
+       dlink,dap-x1860-a1|\
        edimax,re23s|\
+       mikrotik,ltap-2hnd|\
        mikrotik,routerboard-m11g|\
        netgear,ex6150|\
        sercomm,na502|\
@@ -35,8 +37,10 @@ ramips_setup_interfaces()
        h3c,tx1800-plus|\
        h3c,tx1801-plus|\
        h3c,tx1806|\
+       haier,har-20s2u1|\
        hiwifi,hc5962|\
        netgear,wax202|\
+       sim,simax1800t|\
        xiaomi,mi-router-3-pro|\
        xiaomi,mi-router-ac2100|\
        xiaomi,mi-router-cr6606|\
@@ -47,6 +51,7 @@ ramips_setup_interfaces()
                ;;
        asiarf,ap7621-001|\
        humax,e10|\
+       wavlink,ws-wn572hp3-4g|\
        winstars,ws-wn583a6)
                ucidef_set_interfaces_lan_wan "lan" "wan"
                ;;
@@ -74,6 +79,11 @@ ramips_setup_interfaces()
                uci add_list firewall.@zone[1].network='eth_data'
                uci add_list firewall.@zone[1].network='eth_om'
                ;;
+       cudy,m1800|\
+       yuncore,ax820|\
+       zyxel,nt7101)
+               ucidef_set_interfaces_lan_wan "lan" "wan"
+               ;;
        gnubee,gb-pc1)
                ucidef_set_interface_lan "ethblack ethblue"
                ;;
@@ -95,9 +105,15 @@ ramips_setup_interfaces()
        tplink,eap615-wall-v1)
                ucidef_set_interface_lan "lan0 lan1 lan2 lan3"
                ;;
+       tplink,er605-v2)
+               ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4" "eth0"
+               ;;
        tplink,tl-wpa8631p-v3)
                ucidef_set_interface_lan "lan1 lan2 lan3 plc0"
                ;;
+       tplink,mr600-v2-eu)
+               ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+               ;;
        ubnt,edgerouter-x)
                ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4" "eth0"
                ;;
@@ -107,10 +123,6 @@ ramips_setup_interfaces()
        ubnt,usw-flex)
                ucidef_set_interface_lan "lan1 lan2 lan3 lan4 lan5"
                ;;
-       yuncore,ax820|\
-       zyxel,nr7101)
-               ucidef_set_interfaces_lan_wan "lan" "wan"
-               ;;
        zyxel,wap6805)
                ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
                ucidef_set_interface "qtn" ifname "eth1" protocol "static" ipaddr "1.1.1.1" netmask "255.255.255.0"
@@ -162,6 +174,7 @@ ramips_setup_macs()
                lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
                wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
                ;;
+       elecom,wrc-2533ghbk2-t|\
        elecom,wrc-2533ghbk-i)
                lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
                wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
@@ -214,6 +227,26 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_ascii Config wan_hwaddr)
                label_mac=$lan_mac
                ;;
+       mikrotik,ltap-2hnd)
+               label_mac=$(cat "/sys/firmware/mikrotik/hard_config/mac_base")
+               lan_mac=$label_mac
+               ;;
+       tplink,ec330-g5u-v1)
+               label_mac="$(mtd_get_mac_text factory 0x165)"
+               lan_mac=$label_mac
+               wan_mac=$(macaddr_add $label_mac 1)
+               ;;
+       tplink,er605-v2)
+               CI_UBIPART="firmware"
+               label_mac=$(mtd_get_mac_uci_config_ubi "tddp")
+               lan_mac=$label_mac
+               wan_mac=$(macaddr_add "$label_mac" 1)
+               ;;
+       tplink,mr600-v2-eu)
+               label_mac=$(cat "/sys/class/net/eth0/address")
+               wwan_mac=$(macaddr_add $label_mac 1)
+               ucidef_set_interface "wwan0" device "/dev/cdc-wdm0" protocol "qmi" macaddr "$wwan_mac"
+               ;;
        mikrotik,routerboard-750gr3|\
        mikrotik,routerboard-760igs|\
        mikrotik,routerboard-m11g|\