ramips: add support for TP-Link MR600 V2(EU)

[openwrt/openwrt.git] / target / linux / ramips / mt7621 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 688c39940d6e5f8e46984d1f7ea3b9c8b75dca34..bfc654a23aa319ce141b236a4c32a3b436534a9d 100644 (file)
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -9,22 +9,36 @@ ramips_setup_interfaces()
 
        case $board in
        ampedwireless,ally-00x19k|\
+       asus,rp-ac56|\
+       asus,rp-ac87|\
        edimax,re23s|\
        mikrotik,routerboard-m11g|\
        netgear,ex6150|\
        sercomm,na502|\
+       sercomm,na502s|\
        thunder,timecloud|\
        tplink,re350-v1|\
        tplink,re500-v1|\
        tplink,re650-v1|\
        tplink,re650-v2|\
        ubnt,unifi-6-lite|\
-       ubnt,unifi-nanohd)
+       ubnt,unifi-flexhd|\
+       ubnt,unifi-nanohd|\
+       yuncore,fap690|\
+       zyxel,nwa50ax|\
+       zyxel,nwa55axe)
                ucidef_set_interface_lan "lan"
                ;;
        ampedwireless,ally-r1900k|\
+       asus,rt-ax53u|\
        gehua,ghl-r-001|\
+       h3c,tx1800-plus|\
+       h3c,tx1801-plus|\
+       h3c,tx1806|\
+       haier,har-20s2u1|\
        hiwifi,hc5962|\
+       netgear,wax202|\
+       sim,simax1800t|\
        xiaomi,mi-router-3-pro|\
        xiaomi,mi-router-ac2100|\
        xiaomi,mi-router-cr6606|\
@@ -40,11 +54,13 @@ ramips_setup_interfaces()
                ;;
        asiarf,ap7621-nv1|\
        beeline,smartbox-flash|\
+       beeline,smartbox-giga|\
        glinet,gl-mt1300|\
        iptime,a3002mesh|\
        jcg,q20|\
        lenovo,newifi-d1|\
        mikrotik,routerboard-m33g|\
+       mts,wg430223|\
        oraybox,x3a|\
        renkforce,ws-wn530hp3-a|\
        xiaomi,mi-router-3g|\
@@ -60,12 +76,15 @@ ramips_setup_interfaces()
                uci add_list firewall.@zone[1].network='eth_data'
                uci add_list firewall.@zone[1].network='eth_om'
                ;;
-       gnubee,gb-pc1|\
+       gnubee,gb-pc1)
+               ucidef_set_interface_lan "ethblack ethblue"
+               ;;
        gnubee,gb-pc2)
-               ucidef_set_interface_lan "lan1 lan2"
+               ucidef_set_interface_lan "ethblack ethblue ethyellow"
                ;;
        linksys,re6500|\
-       netgear,wac104)
+       netgear,wac104|\
+       zyxel,lte3301-plus)
                ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
                ;;
        mikrotik,routerboard-750gr3)
@@ -81,6 +100,9 @@ ramips_setup_interfaces()
        tplink,tl-wpa8631p-v3)
                ucidef_set_interface_lan "lan1 lan2 lan3 plc0"
                ;;
+       tplink,mr600-v2-eu)
+               ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+               ;;
        ubnt,edgerouter-x)
                ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4" "eth0"
                ;;
@@ -127,14 +149,14 @@ ramips_setup_macs()
                label_mac=$(mtd_get_mac_binary factory 0x4)
                ;;
        beeline,smartbox-flash)
-               lan_mac=$(mtd_get_mac_ascii u-boot-env eth2macaddr)
-               wan_mac=$(mtd_get_mac_ascii u-boot-env eth3macaddr)
-               label_mac=$lan_mac
+               wan_mac=$(mtd_get_mac_encrypted_arcadyan "board_data")
+               label_mac=$(macaddr_add "$wan_mac" 3)
+               lan_mac=$label_mac
                ;;
        buffalo,wsr-1166dhp)
-               local index="$(find_mtd_index "board_data")"
-               wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
+               wan_mac=$(mtd_get_mac_ascii board_data "mac")
                lan_mac=$wan_mac
+               label_mac=$wan_mac
                ;;
        dlink,dir-860l-b1)
                lan_mac=$(mtd_get_mac_ascii factory lanmac)
@@ -150,6 +172,13 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
                label_mac=$wan_mac
                ;;
+       h3c,tx1800-plus|\
+       h3c,tx1801-plus|\
+       h3c,tx1806)
+               label_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+               lan_mac=$(macaddr_add "$label_mac" 1)
+               wan_mac=$label_mac
+               ;;
        hiwifi,hc5962)
                lan_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ")
                label_mac=$lan_mac
@@ -184,6 +213,17 @@ ramips_setup_macs()
                wan_mac=$lan_mac
                label_mac=$lan_mac
                ;;
+       belkin,rt1800|\
+       linksys,e7350)
+               lan_mac=$(mtd_get_mac_ascii Config lan_hwaddr)
+               wan_mac=$(mtd_get_mac_ascii Config wan_hwaddr)
+               label_mac=$lan_mac
+               ;;
+       tplink,mr600-v2-eu)
+               label_mac=$(cat "/sys/class/net/eth0/address")
+               wwan_mac=$(macaddr_add $label_mac 1)
+               ucidef_set_interface "wwan0" device "/dev/cdc-wdm0" protocol "qmi" macaddr "$wwan_mac"
+               ;;
        mikrotik,routerboard-750gr3|\
        mikrotik,routerboard-760igs|\
        mikrotik,routerboard-m11g|\
@@ -192,6 +232,16 @@ ramips_setup_macs()
                wan_mac=$label_mac
                lan_mac=$(macaddr_add $label_mac 1)
                ;;
+       mts,wg430223)
+               wan_mac=$(mtd_get_mac_encrypted_arcadyan "board_data")
+               label_mac=$wan_mac
+               lan_mac=$(macaddr_add "$wan_mac" 2)
+               ;;
+       netgear,wax202)
+               lan_mac=$(mtd_get_mac_ascii Config mac)
+               wan_mac=$(macaddr_add "$lan_mac" 1)
+               label_mac=$lan_mac
+               ;;
        raisecom,msg1500-x-00)
                lan_mac=$(mtd_get_mac_ascii Config protest_lan_mac)
                wan_mac=$(mtd_get_mac_ascii Config protest_wan_mac)