ramips: add support for Netgear WAX202

[openwrt/openwrt.git] / target / linux / ramips / mt7621 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index a8d8b8eef2b09943aa1a6c557edc5b3feaafdf8f..39e095584dfe99ca5c476389c912d51bbdf0df4b 100644 (file)
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -9,6 +9,7 @@ ramips_setup_interfaces()
 
        case $board in
        ampedwireless,ally-00x19k|\
+       asus,rp-ac87|\
        edimax,re23s|\
        mikrotik,routerboard-m11g|\
        netgear,ex6150|\
@@ -26,6 +27,7 @@ ramips_setup_interfaces()
        ampedwireless,ally-r1900k|\
        gehua,ghl-r-001|\
        hiwifi,hc5962|\
+       netgear,wax202|\
        xiaomi,mi-router-3-pro|\
        xiaomi,mi-router-ac2100|\
        xiaomi,mi-router-cr6606|\
@@ -41,11 +43,13 @@ ramips_setup_interfaces()
                ;;
        asiarf,ap7621-nv1|\
        beeline,smartbox-flash|\
+       beeline,smartbox-giga|\
        glinet,gl-mt1300|\
        iptime,a3002mesh|\
        jcg,q20|\
        lenovo,newifi-d1|\
        mikrotik,routerboard-m33g|\
+       mts,wg430223|\
        oraybox,x3a|\
        renkforce,ws-wn530hp3-a|\
        xiaomi,mi-router-3g|\
@@ -127,7 +131,8 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_ascii u-boot-env et1macaddr)
                label_mac=$(mtd_get_mac_binary factory 0x4)
                ;;
-       beeline,smartbox-flash)
+       beeline,smartbox-flash|\
+       mts,wg430223)
                lan_mac=$(mtd_get_mac_ascii u-boot-env eth2macaddr)
                wan_mac=$(mtd_get_mac_ascii u-boot-env eth3macaddr)
                label_mac=$lan_mac
@@ -193,6 +198,11 @@ ramips_setup_macs()
                wan_mac=$label_mac
                lan_mac=$(macaddr_add $label_mac 1)
                ;;
+       netgear,wax202)
+               lan_mac=$(mtd_get_mac_ascii Config mac)
+               wan_mac=$(macaddr_add "$lan_mac" 1)
+               label_mac=$lan_mac
+               ;;
        raisecom,msg1500-x-00)
                lan_mac=$(mtd_get_mac_ascii Config protest_lan_mac)
                wan_mac=$(mtd_get_mac_ascii Config protest_wan_mac)